<<  Back to Complete Auction Details

On-site and Global Webcast Auction

BY ORDER OF U.S. BANKRUPTCY COURT CASE# 12-12149-WHD: COMMERCIAL PLASTIC COMPOSITES INC.

INJECTION MOLDING MACHINES
(1996) 1300-TON HEMSCHEIDT Mdl: 2300-1300H, S/N: 8801040, Tie Bar Clearance: 55.12"H - 49.21"V, Ejector Stroke: 9.84", Clamping Force: 1433-Ton, Mold Height: 25.59
(2000) 720-TON UBE PZII 720 S/N: 28142, Platen Size: 54.72" x 54.72", Clamping Stroke: 39.37", Mold Height (Min-Max): 19.69" - 47.24" & Ejector Stroke: 7.87"
(1996) 610-TON TOSHIBA Mdl: ISGS610-V10-59B (15100GN-5A), S/N: 617506, Machine Dimensions: 336" x 89" x 83", Tie Bar Clearance 34.3 x 34.3, Mold Height (Min & Max) 16.5" & Platinum 48.1" x 48.1"
400-TON CINCINNATI Mdl: MH400-29, S/N: 3904A21-917, Tie Bar Clearance: 29.1" x 29.1", Clamping Stroke: 37.0", Mold Height (Min-Max) 7.1" – 14.2", Ejector Stroke 5.8"
(1999) 390-TON MITSUBISHI Mdl: MJ390, S/N: 36306298, Mold Thickness: 300, Injection Cap: 1610, Mold (Min-Max): 1020 x 720 - 720 x 1020
(2) 150-TON SUMITOMO Mdl's: SG150U , S/N: MOHT8417 & MOHT8234, Machine Dimensions 58.76" x 19.98" x 20.31", Tie Bar Clearance: 5.10" x 5.10", Clamping Stroke: 150, Mold Height (Min-Max): 20.0" - 50.0",
Ejector Stroke: 0 - 120
(1998) 120-TON TOSHIBA Mdl: ISG120N-V10-5A, S/N: 821806, Machine Dimensions: 17.8" x 47.6" x 67.3", Tie Bar Clearance: 18.1" x 16.1", Clamping Stroke: 21.7", Mold Height (Min-Max): 7.9" - 29.5", Ejector Stroke: 3.5"
(1995) 90-TON MITSUBISHI Mdl: 80N153-5, S/N: 38083059, Platen Size: 560mm x 560mm, Tie Bar Clendince: 380mm x 380mm, Mold Height: 180mm, Stroke: 450mm, Injection Cap: 143mm,
(1998) 30-TON TOSHIBA Mdl: ISF30-V10-1A, S/N: 825105, Machine Dimensions: 122" x 40" x 67", Tie Bar Clearance: 10.2" x 10.2", Clamping Stroke: 11.0", Mold Height: 16.9" – 5.9", Ejector Stroke: 2.0"
SUMITOMO, S/N: 8020 (for parts)

DEHUMIDIFYING DRYERS
(2) MATSUI DMZ-80 Dehume Set,
DRI-AIR System Mdl APD-2, S/N: D11856,
CON-AIR Carousel/Dryer w/ Hopper Mdl: CS200, S/N: 120874
NOVATEC System S/N: ADA3411-1196 w/ Hopper
THORESON w/ Hopper
MATSUI Plas-Aid Dryer w/ Hopper Mdl: MS3-100V-2M2A

LOADERS
MAGUIRE Weight Scale-Blender Venturi Loader w/ NOVATEC Vacuum Loader Mdl: WSB2601, S/N: 109523
(4) MATSUI Jet Loader Mdl: JL2-4VC
(8) Loader Bins on Wheels

AUTOMATIC SWING LOADERS & ROBOTS
(3) STAR AUTOMATION Robot Systems Mdl's: (1) LW-1600V-460V3 & (2) LW-1400V-360
(2) (2008) WHITTMANN Robot Systems Mdl's: WG33-0628 & N/A
(2) STAR AUTOMATION Mdl: XQ 6009ILL
SAILOR Robot Mdl: RSPI

TEMPERATURE CONTROL UNITS
(2) AEC Portable 7 1/2-Ton Chiller S/N: 98J0227 & 89025
(4) VETERAN LS Series Temperature Control Mdl: UT-276-65
(2) MATSOL NC Jet Temperature Control
STERL-TRONIC Temperature Control

GRANULATORS
CONDOX Mdl: CS04A
(2) BELOIT Mdl: M-810
BALL & JEWELL Mdl: CG812SCXS
NELMOR Mdl: AN881
POLYMER Mdl: 1116SPI

AIR COMPRESSORS
ATLAS COPCO Mdl: GA45-FF
INGERSOLL-RAND 10hp S/N: 922323
SULLAIR Mdl: ES-8

ROLLING STOCK
2,000 Lbs. YALE Fork Lift w/ Side Shift, 3 Stage Mast, 3 Pallet Jacks, S/N: N592853

CRANE/HOIST
10-TON STEEL Tri-Adjustable Gantry - 25' Span, 19' 5" Max/7" 10" Min Tread, 22" Leg Clear, 10" Caster, 24" Beam Depth
10-TON HARRINGTON Wire Rope Low Head Room Advantage Hoist - 23' Lift, 16/5 FPM, Motorized Trolley: 5.31" to 15.75", Flange Range: 80/20 FPM, 460/3/60 Volt, 4 Button NEMA3 Pendant w/ 11' Drop

TOOL ROOM
COVEL Surface Grinder S/N: 7H5681
MSC Mill S/N: 40510 w/ Auto Table 48" w/ WIZARD 350 Readout, Control
OTM Drill Press
VIKING "H" Frame Press
(2) Table Saws
MORGAN Press Mdl: G1001E S/N: 7340
(2) Drill Presses
DELTA Radial Saw
MILLER Welder
LINCOLN Welder

CONTORLS
(2) OSCO Temp Controlled Units
(2) YUDO ACT D-800 sequence

Assorted Large Quantity of Virgin Resin and Plastics

(4) HFA Belt Conv.

MISC EQUIPMENT
Large Fans, Table, Carts, Pumps, Parts, Tools, Tool Boxes, Tape Machines, Pallet Rack, Hold Downs, VAC, Hardware, Steel Work Tables, Hand Tools, Large Quantity of Boxes

OFFICE FUNITURE
Desk, Table, Computers, Printers, Cabinets, Chairs, File Cabinets

<<  Return to Auction Details