Global Online Auction

FORMERLY OF HOFFMAN MILLS

Auction Dates:
Starts: Monday, July 6, 2009 - 9:00am (PST)
Ends: Friday, July 10, 2009 - 12:00pm (PST)
Auction Type: Global Online Auction
Location: 145 Blackburn Street, York, SC 29745 230 Best Street, Shelby, NC 28150
Description: Complete State-of-the-Art Multi-Million Dollar Jacquard Weaving Mill
Complete State-of-the-Art Multi-Million Dollar Jacquard Weaving Mill

Photo Gallery:

Featuring:


AIR COMPRESSORS

 

 

(1) Air Compressor / Kaeser / Unit consisting of 1-Air Compressor 220 HP & 1-Kaeser Dryer
(1) Kaeser Air Compressor, Model ES290 (Hoffman #5), Serial Number 251265, 460 volt, 3 phase, 60 cycle, max. gauge working pressure 200 psig, min. gauge working pressure 80 psig, free air delivery @ max. gauge 1014 cfm, 220 HP, 1800 rpm, service hours 35925.89, year 1997, load hours 24937.53
With:

(1) Kaeser KRD1000 Air Dryer, year 1997, Serial Number 0368-2C-9703-8K, rated capacity 1000 scfn @ 100 psig @ 100 deg. F., max. working pressure 200 psig, refrigerent type and charge R-22/16.5 lb., 460 volt, 3 phase, 60 cycle, 3 compressed air filters 200 psi for moisture-oil removal-oil vapor absorbing

#5 Holding Tank, N.B. 230966, MAWP 150 psi @ 450 deg. F., MDMT 20 deg. F. @ 150 psi, HDT240 SH.250, year 1997

#5 Oil Mist Eliminator, Model OME1100, S/N HI611057001001K, certified by Hankison Intl. Div., N.B. 38651, MAWP 200 psi @ 300 deg. F., MDMT 20 deg. F. @ 200 psi, S/N 38651, year 1998

#5 Air Compressor Waste Oil Remover, Model CMS-1060


 


 


(1) Air Compressor / Kaeser / Unit consisting of 1-Air Compressor 50 HP & 1-Kaeser Dryer
(1)Kaeser Air Compressor No. 1, Model BS61, year 1996, 200 psig, 225 cfm, 3 phase, 50 HP, 460 volt, S/N 5101993, total of 27,776 hours.
With:

(1) Kaeser KRD Dryer, Model KRD500, S/N 0365-2-9602-22K, rated at 500 scfm, 100 psi @ 100 deg. F., 460 volt, 3 phase, 60 cycle

#1 Holding Tank, N.B. 140953, MAWP 165 psi @ 450 deg. F., MDMT 20 deg. F. @ 165 psi, HDT.184 SH.227, year 1996

#1 Oil Mist Eliminator, Model OME500, S/N HI537389001001K, certified by Hankison Intl. Div., MAWP 200 psi @ 300 deg. F., MDMT 20 deg. F. @ 200 psi, S/N 15411, year 1995

#1 has no Air Compressor Waste Oil Remover

 

 


 

(1) Air Compressor / Kaeser / Unit consisting of 2-Air Compressors 50 HP & 1-Kaeser Dryer

(1) Kaeser Air Compressor No. 2, Model BS61, year 1996, 200 psig, 225 cfm, 3 phase, 50 HP, 460 volt, S/N 5102332, total of 23,589 hours.

(1) Kaeser Air Compressor No. 4, Model BS61, S/N 5101472, year 1995, 50 HP, 460 volt, 3 phase, 60 cycle, 200 psi, 205 cfm
With:

(1) Kaeser KRD Dryer, Model KRD500, S/N 0365-2C-9701-6K, rated at 500 scfm, 100 psi @ 100 deg. F., 460 volt, 3 phase, 60 cycle

#2 Holding Tank, N.B. 129760, MAWP 165 psi @ 250 deg. F., MDMT 20 deg. F. @ 165 psi, HDT184 SH.227, year 1995

#2 Oil Mist Eliminator, Model OME500, S/N HI55614400101, certified by Hankison Intl. Div., MAWP 200 psi @ 300 deg. F., MAWP 20 deg. F. @ 200 psi, S/N 17408, year 1997

#2 Air Compressor Waste Oil Remover, Model CMS-520

 

 

 

 

LOOMS

 

 

(6) Loom / Dornier / Air Jet, LWV6/J 180cm, yr. 1997, with Grosse electronic jacquard head
Dornier Air Jet Looms, LWV6/J 180cm, Year 1997, Grosse 2560 EJP-2 HS Jacquard Head, Van de Sandt harness, 10,624 ends, (4) repeats+ 58.7", Super Elf Accumulators, 940mm diameter beam, Alexco off-loom take-up 460V/60/3 - 5.0/2.0KW, 6 Bank Electric Stop Motion - Electronic take up and let off
Serial Number 72404, 8 color - 8 Feeders, Jacquard Head # 48163
Serial Number 72403, 6 color - 5 Feeders, Jacquard Head # 48162
Serial Number 72401, 6 color - 4 Feeders, Jacquard Head # 48164
Serial Number 72399, 6 color - 3 Feeders, Jacquard Head # 48165
Serial Number 72402, 6 color - 4 Feeders, Jacquard Head # 48160
Serial Number 72400, 6 color - 4 Feeders, Jacquard Head # 48161
<!--[if !supportLineBreakNewLine]--><!--[endif]-->

 

 

(3) Loom / Dornier / Air Jet, LWV6/J 180cm, yr. 1998, with Grosse electronic jacquard head

Dornier Air Jet Looms, LWV6/J 180cm, Year 1998, Grosse 2560 EJP-2 HS Jacquard head, Van de Sandt harness, 11,776 ends (4 repeats+), 65.06", Alexco off-loom take-up, 6 Bank Electric stop motion - Electronic let off and take up - Elf Feeders - split beam
Serial Number 73141, 6 Color - 4 Feeders, Jacquard Head No. 48831
Serial Number 73142, 6 Color - 6 Feeders, Jacquard Head No. 48830
Serial Number 73143, 6 Color - 4 Feeders, Jacquard Head No. 48832
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

 

(3) Loom / Dornier / Air Jet, LWV6/J 180cm, yr. 1999, with Grosse electronic jacquard head
Dornier Air Jet Looms, LWV6/J 180cm, Year 1999, Grosse 5120 EJP-2 HS Jacquard Head, Van de Sandt harness, 11,776 ends (2 repeats+) 65.06", 940mm beam, Alexco off-loom take-up, 6 Bank Electric Stop Motion - Electronic take up and let off - 1000mm beam 460v/3ph/60
Serial Number 73442, 6 Color - 6 Feeders, Jacquard Head #49007
Serial Number 73443, 6 Color - 6 Feeders, Jacquard Head #49006
Serial Number 73444, 6 Color - 6 Feeders, Jacquard Head #49005
<!--[if !supportLineBreakNewLine]-->
<!--[endif]-->

 

 

 

 

LIFTTRUCKS

 

 

(1) Lifttruck / Hubtex / Battery operated, yr. 1998
Hubtex Lift Truck, Type 1.5TS4D, S/N 52615, year 1998, battery operated, with Exide Battery Charger (goes with the Hubtex), Model D3E-24-680, Type LA, S/N WJ98990 , 24-cell

 


(1) Lifttruck / Hubtex / Electric, yr. 1997, 2200 lbs capacity

Hubtex Lift Truck, Type KHWT9, S/N 511773, year 1997, 2200 lb. capacity

 

 

(1) Lifttruck / Hubtex / Electric, yr. 1998, 3000 lbs capacity
Hubtex Lift Truck, Type KHHWIII/1350, Machine No. 52612, year 1998, 2413 lbs., empty weight, 3000 lb. capacity, manual, electric, with Ferro 5 FR Series Charger

 

 

 

 

WINDERS

 

 

(1) Winder / TCI / 100 positions, yr. 1998
TCI Winder, Model M06, S/N 199, year June 1998, 100 positions, 50 positions per side, 6" traverse, cone take, 240V/3/60 motor, 7" Bakelite drum, electronic slub catcher, wax attachment, disc tension, independent drive on each side, rewinder with floor creel, overhead cleaning

 

 


(1) Winder / TCI / 80 positions, yr. 1997
TCI Winder, Model L06/L10, S/N 193, year September 1997, 80 positions, 40 positions per side, 40 positions are 6" traverse, 40 positions are 10" traverse, cone take up, 240V/3/60 motor, electronic slub catcher, wax attachment, disc tension, independent drive on each side, rewinder with floor creel, overhead cleaning

Registration Info:


Bidders Must Agree to All Terms & Conditions.

PROXY BIDDERS:
If you would like to bid, but are unable to participate in our online auction, please fill out, sign and fax back the BIDITUP Terms and Conditions contract.

A 25% deposit of your total maximum bid(s) will need to be submitted to BIDITUP Auctions Worldwide, Inc. for your proxy bid approval.

If you are using a credit card for your deposit, please fill out, sign and fax the credit card authorization form to our office with the 25% amount of your desired credit limit in the ‘Amount’ box.  See other methods below.

ONLINE BIDDERS:
US and Canadian bidders do NOT need to submit a deposit to bid.

Payment Info:


Buyer’s Premium: A 15% Buyer’s Premium Will Be Charged At This Sale.

Acceptable Payment Methods:
1. Cash
2. Cashier’s Check
3. Wire Transfer
3. Corporate check*
4. Personal and company checks*

*Acceptable at the Auctioneer’s sole discretion. Must be accompanied with a bank letter of guarantee from company’s bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS! The credit card authorization form is provided only for proxy bidders and online bidders who need to submit deposits.

Download and complete the appropriate form for Bidder Authorization. Once complete, fax it to 818.508.3025.

  • Credit Card Authorization
  • Bank Letter of Guarantee
  • Terms & Conditions
  • Wire Transfer  Please contact BIDITUP office for wire transfer info.
  • Removal Info:

    Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.