Beam Fab Auto Lines

Line #1 - Beam Saw Line to Include:

(1) 2002 Hem Mdl. 190 Saw, 24” x 44” Capacity, 130’ of Power, 500 lbs. Per ft Capacity Power, Conveyor (8) 25’ Transfer Out Arms

Line #2 - Beam Saw Line to Include:

                (1)ea. 2002 Hem Mdl. 190 Saw, 24” x 44” Capacity, 130’ of Power, 500 lbs. Per ft Capacity Power, Conveyor (8) 25’ Transfer Out Arms

Line #3 – Beam Drill Line to Include:

                (1) Controlled Automation DRL-344 Drill Machine

                (1) Meeco Stenciler Machine

                (5) 7200 lb. Transfer Arms, 30’ L Air Transfer

                68’ 7200 lb. Cap. Feed-In Conveyor,

                68’ Feed-Out Conveyor

                68’ Drop Down Conveyor

 Line #4 – Beam Drill Line to Include:

                (1) Controlled Automation DRL-344 Drill Machine

                (1) Meeco Stenciler Machine

                (5) 7200 lb. Transfer Arms, 30’ L Air Transfer

                68’ 7200 lb. Cap. Feed-In Conveyor,

                68’ Feed-Out Conveyor

                68’ Drop Down Conveyor

 Line #5 – Beam Handling Line to Include:

                (200) Approx. 350’ 7200 lb per foot Capacity Power Conveyor Beam Handling System Complete w/Draw Bridge, Transfer, Rotating Capacity

 Line #6 – Beam Punch, Saw Copying & Camber Line to Include:

                Controlled Automation CNC Whitney S Beam Punch Line

                40’ In-Feed Roller Conveyor

                Part # Marking Machine

46’ Beam Measuring Probe

Conveyor (4) ea. 40’ 7200 lb cap. Transfer In-Feed Arms

40’ In-Feed Conveyor to Punch

After Punch 20” x 38” Capacity Hem Power Miter (EOPC) Saw, Capacity @ 90°

Approx. 300’ Power Conveyor to Camber Machine

Cambco 1000 Camber Syster w/Approx. 40” Cap. X 40’ Power In and Out-Feed

General Fab Machinery

• 2008 Peddinghaus FPB 1800 Plate Processing Line, 1 ¼” x 72” x 20’ Capacity
• Esab CBX 5 Head CNC Torch Boring Table 8’x20’ Capacity, 2003
• Peddinghaus CNC Angle Master 6” x 6”x ½ “ Capacity, w/n 30505-5C, 1998
• Rondo Mdl. 310 ½ “ x 12’ Plate Roll, s/n 27647, 12” Roll Diam, Hyd Drop In, (3) ea. Roll Drive, Pendant, Digital
• Rondo Mdl R65 6” x 6” x 5/8 Angle Roll, 2002, s/n 27648, 18” Roll Diam., 6” Pipe Cap, 10-23 FPM
• 3/4” x 16’ WEBB Initial Pinch Power Roll, Mdl. 16L- 2, 17 ½” Roll Diam., Power Rear Roll Adj., Hyd. Drop End | (This item will be sold via photo and is located in Branchburg, NJ)
• Atlantic Plate Shear, 10’ x 3/8, s/n 14984, 1982, Front Operated Back Gage, 10” (18) ea. Hyd Hold Downs, 10” Sq Arm, (2) ea. 48 Front Supports, 25 hp
• 2003 Accurpress Brake, 400 Ton x 18’ Length, a/n 7510, Distance Between Housing 12’ 4”, 10” Stroke, 20” Daylight, 10” Min. Daylight, 8” Bed w/65 RPM Rapid, 181 pm Press Speed, 112” IPM Return, Lazer Safety System, 40 hp
• 90 Ton Piranha P4 Iron Worker, Punch Die, 1 1/8” – 1”, 12” Throat, 5 ¼ “ Stroke, Shearing Cap 6” x 6” x 5/8”, Plate 18” x ¾”, Round ½ - 2”, Square ½ - 1 3/8”, 40 SPM, Joy Stick Control, 15 hp
• 100 Ton Betty Bulldozer, S/N 20387, 24” Slide Stroke, 60” Daylight, 60” x 16” Cross Arm ??, 60” x 16” End Lug Area, 60” Bed, 30 IPM Press Speed, 293 rpm Return
• 10’ x 1 ½  Dreis Krump Apron Brake
• 200 Ton Lake Erie Traveling Head Straightening Press, 68” x 198” (16’ 6”) Acra of Bed, 68” Distance Between Uprights, 14” Gantry Travel, 25” Head Travel, Right – Left of Enter, 40” Daylight Over Bed, 24” Stroke, 10” Cylinder Diam, Power Head and Gantry
• 8’ x 10’ Aronson Welding Manipulator, s/n 8136, Mdl. 268URA8CL-MK0T-42, 48” Vert Travel, 96” Max Under Arm, 48” Min. Under Arm, 96” Hz. Travel, 15” Min. Hz. Reach, 111” Max. Hz. Reach, Hz. Travel of Car on Track 56’, Weight Cap 500 lbs., (1) ea. Lincoln 1200 AC & (2) ea. Lincoln DC 400 Power Supplies
• 5’ x 12’ Blastec Feed Thru Shot Blaster, (8) ea. Blast Wheels, 30 hp, 40’ Power In-Feed Conveyor & 40’ Out-Feed Reclaim System, Dust Collector
• 12’x 40’ Drive-In Blastec Blast Booth, Both Include Guns, Reclaim Systems, Dust Collector
• 3’ x 11’ Carlton Radial Drill
• 6’ x 10’ Soralace Radial Drill
• Kaukauna Traveling Column Drill , Mdl. 1250, 4’ Arm, 14” Column, 45-800 rpm, Column Switch, 360°

 Welding:

Over 125 Late Model Welders, from 200 – 1200 Amp

 Wheelabrator:

72" AMERICAN Wheelabrator Double-Sided Blast Plate Cleaning Machine, Mdl. 70490, S/N A94217 | Maximum Width 72”, Blast & Clean Rate 12’ – 30’ Per Min, Entry Power Roller Conveyor 16’, Exit Power Roller Conveyor 16’, Shot Wheels – Top 5 - 20 Hp, Shot Wheels-Bottom.. 3 – 20 Hp | Equipped With: Infeed Conveyor Air 4-Station Air Suction Gripper, Transfer Conveyor, Exit Conveyor, Exit 4-Station Air Gripper, Dust Collector, Central Cabinet, Electrical Cabinet | (This item will be sold via photo and is located in Riverbank, CA)

 Forklifts and Rolling Stock:

• 2006 ILG 45’ Man Lift, Diesel
• (2) 500 lb Cap. Scissor Lifts
• American Floor Sweeper
• Tennant 1982 Floor Scrubber
• (2) Hyster 33,000 lb. Forklifts
• (2) Hyster 15,000 lb. Forklifts
• (2) Hyster 8,000 lb. Forklifts
• (2) Clark 5,000 lb. Forklifts
• (2) Yale 5,000 lb. Forklifts
• (2) Mack Truck Tractors, 1997 & 1995
• (1) Ford 700 Flatbed
• (1) 2007 Volvo Tractor Truck w/Sleeper
• (2) 2006 Chevrolet Silverado Pickups

 Cranes and Hoists:

 Approximately 40 Jib Cranes to Include:

• Jib Arm, Hoists from ½ Ton – 5 Ton
• (3) Konecrane 2 Ton Horseshoe Monorail Overhead Lifts
• (2) 5 Ton Monorail 35’ Span Cranes, 15’ Height
• (2) 2 Ton Monorail 35’ Span Cranes, 15’ Height
• (8) 30 Ton x 81’ 10” Span, 35’ Hook Height Overhead Cranes

 Trailers:

Over 70 Over the Road Trailers Including: Aluminum Bed, Extended to 90’ and Low Boy

Real Estate:

Available Property in Bennettsville, South Carolina
343800 Square Feet of Plant Space Air Conditioned w/ Sprinklers | Total Lot Size is 143 Acres! See more information on the property here!

 Miscellaneous:

1000’s of Hand Tools, Maintenance Supplies, Welding Fixtures, Torches, Huge Qty. of Rigging Equipment including Chains & Booms, Docks, Maintenance Carts, Structural Nuts, Bolts, Fasteners, Welding Supplies, Marking Equipment, Air Compressors, Material Racks, Large Qty. Scrap Metal, Some New Metal, 30,000 Sq. Ft. Executive Office Furniture and Office Equipment. Too Much to List All!

Bidders Must Agree to All Terms & Conditions.

ONSITE BIDDERS:
Registration is available onsite. On the day of the sale all purchases must be paid in full or a mandatory 25% deposit is due at time of purchase. PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.

PROXY BIDDERS:
If you are unable to attend our auction or participate via the internet, please fill out, sign and fax back the BIDITUP Terms and Conditions contract.

A 25% deposit of your total maximum bid(s) will need to be submitted to BIDITUP Auctions Worldwide, Inc. for your proxy bid approval.

If you are using a credit card for your deposit, please fill out, sign and fax the credit card authorization form to our office with the 25% amount of your desired credit limit in the ‘Amount’ box.  See other methods below.

INTERNET BIDDERS:
United States and Canadian bidders do NOT need to submit a deposit to bid.

Buyer’s Premium: A 15% Buyer’s Premium Will Be Charged At This Sale.

An Additional 3% Will Be Charged To Internet Bidders.

Acceptable Payment Methods:
1. Cash
2. Cashier’s Check
3. Wire Transfer
3. Corporate check*
4. Personal and company checks*

*Acceptable at the Auctioneer’s sole discretion. Must be accompanied with a bank letter of guarantee from company’s bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS! The credit card authorization form is provided only for proxy bidders and online bidders who need to submit deposits.

Download and complete the appropriate form for Bidder Authorization. Once complete, fax it to 818.508.3025.