|
|
||||||||||||
|
Online AuctionFORMERLY OF NEW EARTH RECYCLING
Photo Gallery:Featuring:Plastic Granulating and Wash Line nominally rated at approx. 12,000 pounds per hour of P.E.T. CONSISTING OF: Two (2) Bale breakers with vibratory conveyors Two (2) Cleated inclined belt conveyors Two (2) Multiple position manual sorting stations One (1) Sterling Ball and Jewell granulator model RG2238, 100 hp motor, with discharge blower and cyclone Three (3) Sterling Ball and Jewell granulators model BP2456, 125 hp motors, with discharge blowers and cyclones Four (4) Kimball 13 cubic yard mix / wash units with drives Two (2) Float / Sink separation tanks with inclined discharge screw conveyors Two (2) Dewatering double screw inclined screw conveyors Two (2) 48” Kason screeners Four (4) 60” Sweco Screeners Two (2) Temptek Chillers model CF-3A One (1) Sioux 15 psig Steam Boiler Two (2) Cleveland Vibrator model EMS 4896 vibrator conveyors One (1) Parkson Lamella settling filter model 570 / 55 One (1) Wolverine Jet Zone belt dryer One (1) approx. 4000 gallon stainless steel tank One (1) approx. 3000 gallon stainless steel tank Six (6) approx. 2000 gallon stainless steel tanks Two (2) approx. 1000 gallon stainless steel tanks Two (2) JWI Filter presses One (1) Process Water filtration system consisting of vacuum filter, filter press, tanks, ozone generation system. System includes all the interconnecting piping, conveyors, ancillary process tanks, controls and analytical equipment. Equipment installed NEW in late 2000 with a cost of over 5 million dollars. Equipment still installed in this immaculate closed facility.
ALSO INCLUDED: 10" CROWN CDL TECHNOLOGIES PELLETIZING LINE
Consisting Of: (1) Crown (CDLTechnologies)
10" Diameter Single Screw Extruder, Model
CEXT10, serial# 1590, Approximately 30 to 1 L/D
ratio, cored for cooling, Electrically heated, water
cooled side vented barrel with a circulation pump,
holding tank, vacuum pump, and heat exchanger,
Feed opening with a ram feeder, model CDRF11,
serial# 1656, Approximate 53" centerline height,
Driven by a 600 hp, 460 volt, 1190 rpm motor,
12:75 gearbox ratio, 80 output rpm, (1) Crown
approximate 12" hydraulic screen changer, model
CSPSC12, serial# 1659, with a 5hp power pack,
(1) Crown underwater pelletizer cutting head,
model CUW-5, serial# 1605, driven by a 30hp,
3/60/208-230/460 volt, 1755 rpm motor, mounted
on a stand, (1) Crown tampering system, model
CUW-5WT, serial# 1606, (1) EZ-Kleen dryer,
model CUW-5WB, serial# 1607, (1) Crown
(CDLTechnologies) 8" Diameter Single Screw
Extruder, Model CTS16-8, Tapered screw starting
at approximate 16" diameter, down to 8" diameter,
approximately 108" total length, cored for cooling,
Electrically heated, water cooled barrel with a
circulation pump, holding tank, and heat
exchanger, Approximate 20" x 16" feed opening,
no hopper, Approximate 60" centerline height,
Driven by a 200 hp, 460 volt, 1783 rpm motor, 1:25
gearbox ratio, 100 output rpm, serial #'s 1595 &
1594, Includes miscellaneous panels.
*LOCATED IN CHICAGO, IL*
400 KW CUMMINS GENSET
One (1) used 400 KW Cummins diesel generator
set, model 680FDC3041AC, 500 kva, 3/60/276-480
volt, serial# EM-90500, with Cummins model
VT12-600-GS engine.
*LOCATED IN CLEVELAND, OH*
40 HP ROOTS ROTARY LOBE BLOWER
One (1) used Roots rotary lobe blower, carbon
steel construction, 5" inlet/outlet, with 40 HP
230/460 volt motor, on stand, serial# 74.3734,
Roots ID# 828-784020.
*LOCATED IN CLEVELAND, OH*
Registration Info:Bidders Must Agree to All Terms & Conditions.
Prior to the auction, A 25% deposit of your total maximum bid(s) will need to be submitted to BIDITUP Auctions & Appraisals Worldwide, Inc. for your registration approval. This is required of all* bidders.
If you are not a successful bidder, this deposit will be refunded to you within 3-5 business days maximum. If a purchaser is successful the deposit paid can be applied to bill, or will be refunded once all purchased lots in their entirety are removed from site within the agreed period and buyer obligations are fulfilled. Please provide BIDITUP’s Deposit Form with your method of choice (see below).
If you are using a credit card for your deposit, please fill out, sign and fax the Credit Card Authorization form to our office with the 25% amount of your desired credit limit in the ‘Amount’ box.
Company Check – Must be accompanied with a Bank Letter of Guarantee.
Wire Transfer – Instructions available upon request.
* NAA and MDNA members are not required to submit a deposit. Payment Info:Buyer’s Premium: A 18% Buyer’s Premium Will Be Charged For This Sale.
Removal Info:***ALL ITEMS TO BE REMOVED BY MONDAY, MAY 25th. NO EXCEPTIONS!*** EXCLUSIVE RIGGER: ORTEGA TRUCKING INC. (310-635-3237) IS LOADING ITEMS AT COST PROVIDED. ALL ITEMS ARE DISASSEMBLED AND READY FOR LOADING!
Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates. |
|||||||||||
| 11426 Ventura Blvd • Studio City, CA 91604 • (818) 508-7034 • | ||||||||||||
| © 2007-2012 BidItUp.com | ||||||||||||