On-site and Global Webcast Auction

FORMERLY OF KIEFFER PAPER/UNICELL PAPER MILL (INDIANA) INC.: AHLSTROM/KAMYR 150 TPD DEINK MILL W/ WET LAP MACHINE, REAL ESTATE (INDIANA) AND 200 TPD RECYCLED PAPERBOARD MILL

Auction Dates:
Starts: Thursday, November 29, 2012 - 10:00am (EDT)
Auction Type: On-site and Global Webcast Auction
Location: Auction To Be Held at: Pewter Hall 850 West Sweet St., Brownstown, IN (2 Miles from Unicell) Facility Location: 1220 West Spring St., Brownstown, IN & 175 Derousse Ave, Pennsauken, NJ
Description:

FORMERLY OF UNICELL PAPER MILLS (INDIANA), INC., AHLSTROM/KAMYR 150 TPD DEINK MILL WITH WET LAP MACHINE, REAL ESTATE (INDIANA) AND 200 TPD RECYCLED PAPERBOARD MILL

JUST ADDED: APPROX 75,000 LBS OF COPPER WIRING

KAMYR-ANDRITZ/AHLSTROM 150 TPD DEINK MILL W/ WET LAP MACHINE (LOCATED IN INDIANA):

Ahlstrom MDL 250 Drum Pulper, Claudius Peters Bale Breaker w/ Incline Conveyor
Ahlstrom SS Pressure Screens (2) F4, (3) F2, (1) AS2, (1) FS4
(2) Ahlstrom Type PRS Gravity Decker/Washers
(4) Albany Engineered Systems S/S Fiber Scalpers (VA Strainers)
(4) Ahlstrom RB 300’s Hi Density Cleaners
(2) Ahlstrom RB 80 D Low Density Cleaners
(3) Two (2) Meter Ahlstrom Twin Wire Belt Presses
Ahlstrom Screw Conveyor Type Steam Mixer
(2) Ahlstrom H1000 MDR’s (Hot Dispersers)  
Kamyr SS Bleaching Tower
Felker Bros. Peroxide Mixing Tower S/S
Poseidon PP450 Clarifier S/S (2000 GPM)
(50) Ahlstrom Centrifugal Stock Pumps
Lamb-Grays Harbor Wet Lap Machine with Cutter-Layboy, Lamb-Grays Harbor Hydraulic Press, Oval Strapping Bale Wire Tier and Vertical Hydraulic Bale Stacker, Switchgear, Large Quantity of Motors, Motor Control Centers, SS Tanks, Valves & Instrumentation, Air Compressors, S/S Pipe, Lab Equipment etc.
LARGE DEMOLITION & SCRAP OPPORTUNITY - BUILDING STRUCTURES FOR DEMOLITION TO BE OFFERED AT SALE

Real Estate to be sold subject to seller confirmation:
Unicell Paper Mills ( Indiana), Inc. is situated at 1220 W. Springs Street, Brownstown, 47330, Jackson County, Indiana, on a prime fully developed 35.3 acres of land. The site has a rail spur on main CSX line and fully serviced by excellent road network in close proximity to the key markets for end products in the North and also key raw materials like waste paper. The site is exactly midway between Indianapolis and Louisville and 120 miles from Chicago and is just off I-65 principal highway.  

200 TPD RECYCLED PAPERBOARD MILL (LOCATED IN NEW JERSEY):
(9) J.H. Horne SS Pressure Formers
Suction Drum
Beloit Tri-Nip Press
Dryers
Calenders
Sandar Tulsa Turn Up System
Measurex Scanner
Beloit 3204 Track Reel
Vacuum System
Stock Preparation Equipment
25 Ton P&H Truck Mounted Crane
Material Handling
Water Treatment
Tanks & Mixers
Paper Cutter
Columbia Palletizer

Photo Gallery:

Featuring:

AhlstroKamyr 150 TPD Deink Mill & Wet Lap Facility Built in 1992 (Formerly of Kieffer Paper/Unicell Paper Mills (Indiana), Inc.)
PULPING SYSTEM-DRUM PULPER:
72" W X 45' L INCLINED BALE FEED CONVEYOR, CLAUDIUS PETERS Mdl: KS5-4-11 4-SCREW BALE BREAKER With drives and electronic controls. Weight 22,400 lbs. 15 HP. Titan Industries 60" W x 20' L weigh conveyor, with load cells, scale head. Fractional HP drive. Titan Industries 48" W x 100' L inclined pulper feed conveyor. KAMYR FIBER FLOW Mdl: 250 DRUM PULPER 8' 2" (2.5 M) dia. x 40' (13.6 M) L, inlet chute. DEFLAKING SECTION OF THE DRUM, Screening Section of the drum, Shower hood, Accepts vat, Support rollers and guide roller, Drive train components, Safematic lubrication system, 200 HP with gear reducer and pinion/bull gear
WET LAP MACHINE WITH LGH CUTTER LAYBOY:
84" W KAMYR TWIN WIRE WET LAP MACHINE w/Lamb-Grays Harbor Cutler Layboy & Bale Press, 150TPD. Kamyr Mdl: K-80 twin wire pulp press, receives stock at 2 1/2 - 4% consistency and discharges at 30-40% consistency (driven by 25 HP, 1800 RPM, AC Vari Speed motor). Kamyr Mdl: HC-80 press receives pulp mat from the K-80 at 30-40% consistency and discharges at 45-50%. (HC Press driven by a 40 HP, 1800 RPM, AC Vari Speed motor). LGH Cutter Layboy then slits, cuts and stacks the wet lap sheets in piles and moves them to the LGH Bale Press. With controls, electrical panels, drives, conveyors, etc.
GRAVITY DECKERS:
TWO (2) AHLSTROM TYPE PRS-2080-1R GRAVITY DECKER, the screen drum is a perforated screen cylinder 6' 5" x 26' in length, drum. Holes are 1.4" dia. resulting in 63% open area. Feed consistency range of 0.5 - 2% and outlet consistency of 3.0 - 7.0 %, belt driven by 25 hp 1800 rpm motor through gear reducer rotating the drum at a constant speed of 8 rpm. S/S construction.
PRESSURE SCREENS:
 AHLSTROM Mdl: FS-4 FIBER SCREEN STAINLESS STEEL. No Motor, AHLSTROM Mdl: F4 AHLSORTER STAINLESS STEEL w/GE 200 HP, 3/60/460V, 1190 RPM motor, AHLSTROM Mdl: F4 AHLSORTER STAINLESS STEEL w/ GE 100 HP, 3/60/460V, 1190 RPM motor, AHLSTROM Mdl: AS-2 SELECTOR STAINLESS STEEL w/ GE 30 HP, 3/60/460V. 1770 RPM motor, AHLSTROM Mdl: F2 AHLSORTER STAINLESS STEEL w/ GE 50 HP, 3/60/460V, 1185 rpm motor, AHLSTROM Mdl: F2 AHLSORTER STAINLESS STEEL w/ GE 75 HP, 3/60/460V, 1190 rpm motor & AHLSTROM Mdl: F2 AHLSORTER STAINLESS STEEL w/ GE 40 HP, 3/60/460V, 1185 rpm motor.
WATER CLARIFIER & TREATMENT:
POSEIDON PP450 DAF CLARIFIER, CAPACITY 2000 GPM, T-316L stainless steel wetted parts. Dimensions: 307" x 198" x 157". 3/60/460V & ALBANY ENGINEERED SYSTEMS MODULAR FIBER SCALPING SYSTEM with four (4) VA 45 strainer, with 60 mesh filter baskets, rotating shower boars, each strainer comes with a 10 hp aero vent blower and separator tanks.
CLEANERS:
 AHLSTROM Mdl: RB300 HD HIGH DENSITY CLEANER with Junk Trap stainless steel 4", 343 Gl./Min, BANK OF (3) AHLSTROM Mdl: RB300 HD CLEANERS, Stainless Steel, 4" dia., 343 Gl./Min, AHLSTROM Mdl: RB80D "ELIMINATOR" BANK OF LOW DENSITY CLEANERS, (52) cleaners, 3640 gpm @ 25 PSI pressure drop, stock consistency 0.31% - 0.8%, 1% max, 3" dia.. T316 s/s head, urethane body & BANK OF (6) CLEANERS Mdl: RB 80D LOW DENSITY CLEANERS, 420 gpm @ 25 PSI pressure drop stock consistency 0.3% - 0.8%, 1% maximum. 3" dia.. T-316 stainless steel head, urethane body.
TWIN WIRE BELT PRESSES:
(3) 84" W KAMYR Mdl: K-80 TWIN WIRE BELT DEWATERING PRESS Dewaters stock from 2 1/2% - 4% consistency and discharges at 30-40% consistency.The press consists of (4) zones of stock dewatering, gravity drainage, low pressure wedge, intermediate pressure "S" roll zone and high pressure nip roll zone; AC variable speed 25 HP, 1800 RPM motor, pneumatic control zone & 80" W KAMYR Mdl: A DUAL DRUM TWIN WIRE BELT SLUDGE DEWATERING PRESS Two (2) independent primary dewatering drums, 12 gauge 304 S/S, open ended and open sided with (4) compartments in drums provided by baffle walls; each baffle wall has (3) openings. Distribution feed box, supplemental gravity table section. Low pressure "S" roll, (3) individually adjustable separate pressure zones (nip rolls). Belt tension tracking and nip pressure are pneumatically controlled and independently adjustable.
 DISPERGERS & STEAM MIXER:
(2) AHLSTROM Mdl: H1000C MDR KNEADER with counter rotating shafts, stainless steel, 1000 hp motor with water cooled gear reducer, KAMYR STEAM MIXER 304L stainless steel construction. With 100 HP motor and gear reducer.
TANKS & MIXERS:
 FELKER BROTHERS PEROXIDE MIXINGTOWER 10' ID. Stainless steel construction, bottom mount agitator with gear reducer, C-TEC DUAL BELT,VERTICAL PULP CONVEYOR. Stainless steel construction. (2) 5 HP drives. (Previously used to feed peroxide tower.), Numerous Stainless Steel and Fiberglass Tanks up to 10,000 gallons, Small Ribbon Mixer, S/S Agitators.
BLEACH TOWER:
 KAMYR FAS BLEACHTOWER The FAS is an upward flow tower and will hold stock for approximately 90 minutes retention. It is 8' dia. x 70' high and is construction of stainless steel, stock will travel up the tower at approximately .8' per second.
MISCELLANEOUS:
 AHLSTROM Mdl: DHL10 DEFLAKER PUMP, 6" x 4" x 13. 125 HP belt driven assembly. Deflaker/Pump is a specialized centrifugal pump.
ELECTRICAL:
(7) CUTLER HAMMER UNITROL MOTOR CONTROL CENTERS 3PH/480V w/#1 to #5 Starters. 17 to 27 Breakers per unit, GE AKD-8 SWITCHGEAR, (9) DRY TYPE TRANSFORMERS up to 1000KVA, AIR SYSTEM: (1999) INGERSOLL-RAND SSR COMPRESSOR, 100 HP, Atlas GA 550, Airtek twin tower desiccant dryer Mdl: TWP 770, ALSO: Miller welders, gear puller, pipe benders, air compressors, pipe threader, testing equipment, Muller pallet wrapper Mdl: 303, baler, reject compactor, tool cabinets, assorted roller conveyors, gearboxes, LARGE QUANTITY BEARINGS, LARGE QUANTITY OF MOTORS (up to 1000HP), LARGE QUANTITY OF STAINLESS STEEL PIPE, LARGE QUANITY OF VALVES AND INSTRUMENTATION & LARGE QUANTIY OF AHLSTOMAPT SS PUMPS
Real Estate to be sold subject to seller confirmation:Unicell Paper Mills ( Indiana), Inc. is situated at 1220 W. Springs Street, Brownstown, 47330, Jackson County, Indiana, on a prime fully developed 35.3 acres of land. The site has a rail spur on main CSX line and fully serviced by excellent road network in close proximity to the key markets for end products in the North and also key raw materials like waste paper. The site is exactly midway between Indianapolis and Louisville and 120 miles from Chicago and is just off I-65 principal highway.

200 TPD Recycled Paperboard Mill (175 Derousse Avenue, Pennsauken NJ 08110)
PAPERBOARD MILL:
103" TRIM PAPERBOARD MACHINE WITH STOCK PREPARATION: Previously used to produce 200 TPD of 38-60 lb/1000 sq.ft. (184 - 292 gsm) of gypsum wallboard from 220 TPD of pre & post consumer waste at 750 FPM. Machine is left hand, line shaft driven looking from the wet end. Helpermotors are used for each cylinder and press section. Gypsum, linerboard,medium, core stock & various chip grades.
FORMERS:
(1980) (9) J.H. HORNE STAINLESS STEEL PRESSURE FORMERS with 42" dia. x 114" l cylinders with 14 mesh backing and 30/32 mesh wire, 18" couch rolls, and tapered inlets. Octopus radial distributors used for profile control for top layer. (7) formers are type BRDA, (1) is a VTKR, and (1) is a counter-flow vat, SUCTION DRUM with 30" dia. bottom brass suction roll and 18" dia. polyurethane covered drilled top roll. Rated 150 PLI. **Spare rolls for each position, BELOIT TRI-NIP PRESS 1st primary press with 23" dia. bottom rubber covered suction roll and 17 1/2" dia. rubber covered blind drilled top roll. Rated 250 PLI, 2ND PRIMARY PRESS with a 32" dia. rubber covered suction roll (w/spare)and a 17 1/2" dia. blind drilled roll. Rated 250 PLI, 1ST MAIN PRESS UTILIZING SAME SUCTION ROLL with 21" dia. Stonite roll. Rated 300 PLI & 2ND & 3RD MAIN PRESSES each with a 21 1/2" dia. rubber covered bottom roll and a 21" dia. Stonite top roll. Each rated 400 PLI.
DRYERS:
(80) 48" DIA. X 112" FACE BELOIT DRYER CANS each National Board rated for 75 PSI @ 450 deg F. Arranged in 4 sections. (5) Westpatt Mdl: PMSTR-DC-16-2A rope stretchers, frames, gears, and anti-friction bearings.
CALENDARS:
(2) BELOIT CALENDERS STACKS - First stack is the wet calendar and has a 24" dia. bottom king roll, a 16" dia. queen roll, (2) 12' dia. intermediate roll, and a 16" dia. top queen roll. The second stack is the dry stack and has a 24" dia. bottom king roll and 12" dia. intermediate roll. Each is equipped with Westpatt tail threaders.
TURN UP SYSTEM:
 SANDAR TULSA 111 AUTOMATED REEL TURN UP SYSTEM.
SCANNER:
 MEASUREX 2200 "O" FRAME SCANNER, Complete DCS system installed in 1996.
REEL:
BELOIT 3204 TRACK REEL with a 24" dia. x 110" face drum with a 2" rope groove, primary and secondary arms, and capable of winding up to approximately 90" dia. rolls.
VACUUM SYSTEM:
(1) NASH CL3002, 150 HP, 450 RPM • (2) NASH CL3001, 150 HP, 500 RPM • (2) NASH CL4002, 200 HP, 400 RPM • (2) NASH CL2002, No Motors
CRANES:
25-TON P&H MT 250 Truck Mounted Crane. Outriggers. 360 degree swing. 85' Main boom. Runs and drives
STOCK PREPARATION:
(2) BLACK CLAWSON 16' DIA. HYDRAPULPERS each with size 3 BC gearbox. Raggers on each unit, (1998) BELOIT 48" BELPURGE II DETRASHER, BELOIT BELCOR DETRASHER 44" ROTOR Mdl: 4996. 250 HP motor with V-belt drive, (2000) KADENT AES FILTER BANK with 7 cartriges. .006 slotted elements, (1997) MAULETYPE GRIII SEPRAPLAST, 125 HP.T316 S/S, (1993) NEILSEN & HIEBERT Mdl: 2600-80 ROTARYTROMMEL SCREEN. S/S, BLACK CLAWSON SIZE 30 ULTRASORTER. 316 S/S, (3) BLACK CLAWSON SIZE 14.5 HD CLEANERS with automatic valves, (4) 72" WIDE STAINLESS STEEL DORR OLIVER 120 DEGREE DSM SCREENS with pressure manifolds, DORR OLIVER 7' DIA. X 13 DISC SAVEALL, BLACK CLAWSON UV400 S/S PRESSURE SCREEN 250 HP Motor, (1998) (3) SUNDST 6 PRESSURE SCREENS Mdl: LITEFLO DELTA (2 PRIMARY, 1 SECONDARY), 125 HP, CELLECO 350 LOW CONSISTENCY CLEANERS -4 STAGE, SUNDS MD1 MINI DELTA PRESSURE SCREEN (TERTIARY), 34" SPROUT WALDRON TWIN FLO REFINER 500 HP AC Motor, 34" ANDRITZ SPROUT BAUER TFIII TWIN FLO REFINER w/ 800 HP AC Motor 4160V 593RPM, BIRD Mdl: 400 CENTRISORTER 125 HP BELT, .045" holes, Also: Sandy Hill Roll Splitter 118" w x 77" dia., (8) Goulds 3175, Size 8" x 10" x 14" pumps rated 2000 GPM at 60' HD, (2005) KAJAANI KSF automatic freeness analyzer, Nalco 7540 metering system with (9) Moyno pumps & Rosemount Mdl: 8732C Magnetic flow meters, AC & DC Drives, (2) Dynamic Blower fans Mdl OPW-29. Misc. SS tanks, agitators, ASSORTMENT OF VALVES AND INSTRUMENTATION; centrifugal pumps, compressors, tools & spares inventory.

Registration Info:

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned
   spending amount or a $2,500 Minimum Deposit in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.
ONSITE BIDDERS
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit
   or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company
   check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days ***

   PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE
   TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order
   to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.

Payment Info:

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info:

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.