Live On-site and Global Webcast Auction

HUGE OFFERING FROM BLUESCOPE BUILDINGS, METAL BUILDING MANUFACTURING MACHINERY & EQUIPMENT INCLUDING YODER, B & K & ASC PANEL ROLLFORMING LINES, JORNS CNC FOLDERS, PEDDINGHAUS ANGLE LINE & MUCH MORE!

Auction Info

In Conjunction with Cincinnati Industrial Auctioneers

ASSETS LOCATED IN LAURINBURG, NORTH CAROLINA
Franklin Punch Beam LineBeam Line Peddinghaus Plate Line12-Stand B & K Rollformer14-Stand Yoder Rollformer18-Stand Yoder Rollformer Franklin DuplicatorPeddinghause Hydraulic Angle ShearOxy-Fuel Torch Gantry •  Betenbender Shear Jorns Hydraulic FolderPress Brake HTC •  Verson Mechanical Press BrakePeddinghaus DJ Angle Master • Hydraulic Power Unit • Portable Pipe Threader • Shear Press • Turret Punch Press • (18) Weld Power Supply • (5) Hydraulic Power Units • (14) War Wagon Smart Cart • Uncoiler Straightener • Vertical File Machine • Dahlstrom Coil Car, • B & K Coil Car & UncoilerYoder Uncoiler & Coil Car • Electric Coil Transfer Cart • Coastal Pacific Train Hoist & Engineering Company Single Girder Crane Less Trolley • 16' Pneumatic Lifter • 30" Wide Coil Lifter • Sheet Feeder • Infeed Conveyor With Weld Seam Fixture And Feeder/Encoder • Infeed Powered Conveyor With Weld Seam Fixture, • Scotchmen Shear • Powered Infeed/Ouffeed Conveyor • Gage Punch Cylinders • Adhesive Dispensing System, • Single Head Plasma Gantry • Weld Power Supply • Diameter Solid Weld Wire • Plasma Cutting System

ASSETS LOCATED IN ANNVILLE, PENNSYLVANIA (TO BE SOLD VIA PHOTO)
Downspout/Elbow Line • (4) Beam Weld Carts

ASSETS LOCATED IN EVANSVILLE, WISCONSIN (TO BE SOLD VIA PHOTO)
Rockford MFG Rod Leveler P&H Underhung O/H CraneDecoiler With Manual Arms • Anver Vacuum Lift • 3 Arm Turnstile • Immersion Tank

ASSETS LOCATED IN JACKSON, TENNESSEE (TO BE SOLD VIA PHOTO)
14-Stand ASC Panel Line Rollformer Line10-Station Rollformers of Texas Ridge Cap RollformerBradbury Flying Shear/Straightener Unit Michigan Roll Form •  RapidAir Uncoiler D & K Chicago Straight Side Press •  Jorns CNC Folding Machine Grover Conductor Pipe/Down Spout Machine(2) Switchgear Enclosure Long Horton Vans Inc. Equipment Series Gooseneck Trailer • (Lot) Button Punches & Dies: (3) Pallets of Various Size & Quantities

ASSETS LOCATED IN LOS ANGELES, CALIFORNIA (TO BE SOLD VIA PHOTO)
(2001) Peddinghaus Mdl: BDL 760/SA 3-Head CNC Beam Drill

ASSETS LOCATED IN SAN LUIS OBISPO, CALIFORNIA (TO BE SOLD VIA PHOTO)
(1984) Ropco Mdl: HD-1080S Straddle Lifter

ASSETS LOCATED IN SAN MARCOS, TEXAS (TO BE SOLD VIA PHOTO)
(3) Yale Forklifts • Nissan Forklift • (2) Mitsubishi Forklifts • (2) NSS Rider Sweeper • Sideloader

ASSETS LOCATED IN ST. JOSEPH, MISSOURI (TO BE SOLD VIA PHOTO)
Quincy Water Cooled Air Compressor

ASSETS LOCATED IN DEMOPOLIS, ALABAMA (TO BE SOLD VIA PHOTO)
Cincinnati Mdl: 3SE-24 Hydraulic Power Squaring Shear

(Tax rates will be determined by the location of the equipment.)


Terms & Conditions

Auction Dates

Starts
Thursday, July 25, 2013 - 10:00am (EDT)

Auction Type

Live On-site and Global Webcast Auction

Location

Auction Location: 13421 North Rocky Ford Rd, Laurinburg, NC 28352, Additional Assets To Be Sold Via Photo Located At: Annville, PA Evansville, WI, Jackson, TN, Los Angeles, CA, San Marcos, TX, Demopolis, AL & St. Joseph, MO

Description

HUGE OFFERING METAL BUILDING MANUFACTURING MACHINERY & EQUIPMENT INCLUDING COMPLETE YODER, B & K AND ASC PANEL ROLLFORMING LINES NEW AS LATE AS 2006, JORNS CNC FOLDERS, PEDDINGHAUS ANGLE LINE AND MUCH MORE!

Featuring

In Conjunction with Cincinnati Industrial Auctioneers 

ASSETS LOCATED IN LAURINBURG, NORTH CAROLINA
BEAM LINES
196-TON FRANKLIN PUNCH BEAM LINE, 2 Punches, 1 Shear, 12" W Plate, Conveyors Apart, S/N 981F1652
BEAM LINE, 50ʼ Entry Conveyor, Coltonbeck, 56" Blade Diameter, Carbide Dipped, Trippled Chipped, Out of Saw 60ʼ Transfer Conveyer to Faber Line Punching System, Webb Flanged & Flanged, Faber Line Combination Punch System, 120ʼ Exit Discharge Conveyor

PLATE LINE
1996 PEDDINGHAUS PLATE LINE, 500 Peddinghaus Combo Punch & Press Unit, Mdl. 50FPB500, Consisting of: Conveyor Gantry System, Plasma Punch, No Discharge, Hypertherm HT2000, Donaldson Dust Collector & 1/2T Gantry

ROLLFORMERS
12-STAND B&K ROLLFORMER, 2-1/2-3" Shaft, 36" Nominal Roll Space, Nice BC Drive, 80-Ton B&K Cutoff, Die Accelerator, 100ʼ Conveyor (Approx.)
14-STAND YODER ROLLFORMER, MDL. M2-1/2, 3" Shaft Diameter, 42" Nominal Roll Space
18-STAND YODER ROLLFORMER, MDL. M2-1/2, 3" Shaft, 48"W, 50" Guide, 50 HP

UNCOILERS
20,000 LB B&K COIL CAR & UNCOILER, Traversing Base, Modified Drive, Hydraulic Travers, DC Drive
20,000 LBS YODER UNCOILER & COIL CAR RAVE, 48"W
UNCOILER STRAIGHTENER, MDL. 20H-30-1822

SHEARS
250-TON 8 X 8 PEDDINGHAUSE HYDRAULIC ANGLE SHEAR w/Hydraulic Unit, S/N 6092502865
45-TON SHEAR PRESS CAPACITY W/HYD PS, MDL. 609250-28654, V-Roller Conveyors - 18ʼ & 10ʼ
1" X 12" W BETENBENDER SHEAR, MDL. 12, Hydraulic Unit, 18" Blade Width, 1" Thick, S/N 163400
SCOTCHMEN SHEAR MDL. F15109-14M, S/N 1378M501

PUNCH PRESS
330-TON FRANKLIN DUPLICATOR, MDL. B5336, Main Unit Size 54" x 144", S/N F1088687
(2000) 5' PEDDINGHAUS DJ ANGLE MASTER, MDL. 623M, 6 x 6 Capcity, Double Punch Exterior, S/N 40693-F
WIEDEMANN PUNCH, MDL. 2000
TURRET PUNCH PRESS, MDL. C2000, S/N 366

PRESS BRAKES
300-TON HTC PRESS BRAKE, Mdl. 300-12h, 12ʼ Bed, 10ʼ Set Up for Punching, S/N 28001911
150-TON VERSON PRESS BRAKE, MDL. 8
125-TON VERSON PRESS BRAKE, 8" Stroke
(2000) 21' JORNS HYDRAULIC FOLDER, MDL. 125-SOCNC400A, 480 Control, 21ʼ Overall Length, S/N 0030-02
55-TON VERSON MECHANICAL PRESS BRAKE, 3" Stroke, 5" Adjustment, 12" Shut Height, 10ʼ Overall, S/N 25562-08-65

CRANE
10-TON COASTAL PACIFIC TRAIN HOIST & ENGINEERING COMPANY SINGLE GIRDER CRANE LESS TROLLEY, S/N 3105-1-08, Individual End Truck Drive, Festooned, 50ʼ Span (Approx.)

CONVEYORS
60' INFEED CONVEYOR, MDL. 9408, w/Weld Seam Fixture and Feeder/Encoder, 10ft Version 7.50BI Press
45' POWERED INFEED/OUFFEED CONVEYOR, MDL. RM-FL-LN, (2) 3.5 Gage Punch Cylinders, S/N 981 FL 652
45' INFEED POWERED CONVEYOR w/Weld Seam Fixture

PLASMA & CUTTING MACHINES
PLASMA CUTTING SYSTEM w/AB900 Series Control, HT2000 PS
OXY-FUEL TORCH GANTRY, MG SYSTEM 80-6 HEAD TORCH GANTRY w/Rail (S/N TMC3508P-91), (8) 7ʼ Rail Sections
SINGLE HEAD 18' PLASMA GANTRY w/HT2000 PS, Mdl. TMC4514, S/N TMC4515LP98-3576

LIFTERS
16' PNEUMATIC LIFTER, MDL. 5600.16.00.41316N30, 4400 Lb. Capacity
30" WIDE COIL LIFTER, S/N MCL-20-15, 15" Lift

WELDING EQUIPMENT
(7) WELD POWER SUPPLY, CV400 WPS
(2) WELD POWER SUPPLY, CV300 WPS
WELD POWER SUPPLY, Ultra ARC UA 1800 Studwelder
(3) WELD POWER SUPPLY, Ideal ARC 500 PS Pulse, S/Ns 693417, 717513, 717538
(5) WELD POWER SUPPLY, Ideal ARC 1000 PS, Mdl. 9572M
(11720 LBS) L50, 0.0625" DIAMETER SOLID WELD WIRE (6) 1000 Lbs Drums, (10) Partials

COIL & WAR WAGON CARTS
DAHLSTROM COIL CAR, 20,000 LB FLOOR MOUNT COIL CART, 36" W, 4 x 4 Platform, 10,000 Lb x 36" W Dahlstrom Uncoiler, 18-22" Diameter, Traversing Base, 30" Max Height, 60" Coil O.D., Hydraulic Expansion, Traversing Base
10-TON ELECTRIC COIL TRANSFER CART, w/25ʼ Rails
(11) WAR WAGON SMART CARTS
(3) WAR WAGON, Heavy Line Pace Line Carts (Super Cart)

MISCELLANEOUS EQUIPMENT
PORTABLE PIPE THREADER(5) HYDRAULIC POWER UNITS, (2) Large and (3) Small Reservoir Power Supply • HYDRAULIC POWER UNIT, Vickers Hydraulic Power Unit 15 HP for Tack Station • VERTICAL FILE MACHINESHEET FEEDER, 34" Wide Capacity • ADHESIVE DISPENSING SYSTEM, Therm-O-Flow Series C#617484 With President Air Pump


ASSETS LOCATED IN ANNVILLE, PENNSYLVANIA (TO BE SOLD VIA PHOTO)
(2001) GROVER MDL. 3400 CONDUCTOR PIPE/DOWN SPOUT FORMING MACHINE; 25 Ga. Max Capacity, Tooled For 3" X 4" Downspout Pipe, 13-¾" Material Width, Steel, Aluminum or Cooper, Pneumatic Exit Shear, Programmable Controller, 3 HP Motor
(2001) GROVER MDL. 400A AUTOMATIC ELBOW FORMING MACHINE; Angles From 45 Degrees to 90 Degrees, Die For A+B Type Elbows, Side or End Crimping, 26 Ga. Capacity
(LOT) GROVER MDL. 400A TOOLING
4,000 LB. X 18" CWP MDL. 3RM-18 COIL STOCK REEL; S/N C1631, 60" Coil Diameter
(4) 8,000 LB CAPACITY CUSTOM BUILT TRACK MOUNTED I-BEAM WELDING POSITIONING FIXTURE W/TRANSFER CART; Max 18" Flange & 60" Webb I-Beam Size, Pneumatic Track Motors, 360 Degrees Beam Positioning, Track Mounted For Variable Length Positioning

ASSETS LOCATED IN EVANSVILLE, WISCONSIN (TO BE SOLD VIA PHOTO)
48" ARM X 60,000 LB. CAPACITY ASC MACHINE TOOLS INC. MDL. TRN-10M3H60W60D20, Three Arm Free Turning Turnstile; 63" Ground Clearance, 36" Diameter Column, 12 1/2" Wide Arms, 80" Overall Height
10-TON CAPACITY X 65' (APPROX.) P & H BOTTOM RUNNING DOUBLE GRINDER OVERHEAD BRIDGE CRANE; S/N 98C1235, (2) 1.5 HP Drive Units for End Trucks, 107" Overall Width, 35" High Hoist Beam, 18" High Rear Beam (New 1998) **Not in Use, Sitting on Ground**
10-TON CAPACITY P & H REDI-LIFT PENDANT CONTROL BOTTOM RUNNING BRIDGE CRANE HOIST; 14 HP Hoist Motor **Not in Use, Sitting on Ground**
(2010 – Never Installed) LONG PART PAINT TANK DIP SYSTEM; Fabricated by Pneu-Mech Systems Mfg, Statesville, NC, Consisting of; 7,000 Gallon Rectangular Heavy Duty Carbon Steel Immersion Tank w/ Pneumatic Operated Lids; 62" Wide x 88" Deep x 51ʼ Long, (14) Agitation Nozzles, 2" Drain Outlet Valve w/ Piping
(2011) 25 HP TANK PUMP RECIRCULATION AND FILTRATION SYSTEM CONSISTING OF; Rosedale Products Mdl. 24306F11500-C Immersion Tank Recirculating Filtration System; S/N RD-11287, M.A.W.P (PSI @ Degrees Fahrenheit) Vessel Pressure 150 Temp - 400 Degrees, M.D.M.T (Degrees Fahrenheit @ PSI) Vessel Temp – 20 Vessels Temp. 150 Degrees, 25 HP Motor, Skid Mounted, Never Installed
(1997) 6,000 LB. CAPACITY AMERICAN STEEL LINE MDL. 60 COIL REEL; S/N 2198, 20 – 24" Expanding Mandrel, Push Button Controls ROCKFORD MFG. GROUP MDL. D-10143 S&C HYDRAULIC ROD LEVELER; S/N 97024102, 1/2" & 5/8" Capacity Wire Rod, Extra Dies, ABB Model ACS500 PLC For Feed Length
(2007) 40' LONG X 4,100 LB. CAPACITY ANVER MDL. M410M7-420 MECHANICAL VACUUM PANEL LIFTER; S/N 50070001775, Max. Load Width 5ʼ, (7) Vacuum Lifting Pads, Anver VLS-07 Vacuum Leaking Sensor and Warning System

ASSETS LOCATED IN JACKSON, TENNESSEE (TO BE SOLD VIA PHOTO)
(2007) ROLLFORMERS OF TEXAS 10-STATION RIDGE CAP ROLLFORMER; Chain Driven, Manual Feed, 24 or 26 Gauge Material
(1980) 4" GROVER MDL. 3400 CONDUCTOR PIPE/DOWN SPOUT MACHINE; Tooled For 3" X 4" Downspout Pipe, 13 3/4" Material Width, Steel, Aluminum or Cooper, Pneumatic Exit Shear, 3 HP Motor
(2) 6' X 7' X 21" SWITCHGEAR ENCLOSURE; Six-Zone, Phase Down, Phase Down Duration
(2006) 10 TON X 22' LONG HORTON VANS INC. EQUIPMENT SERIES GOOSENECK TRAILER; S/N 5E2G2302161026855, Dual Tandem Axle, Dual Tires, Electric Brakes, Spring Assist Drive on Ramps, 2-5/16" Coupler, 16" OC Cross Members, Loading Ramps
3,000 LB X 18" RAPIDAIR UNCOILER; S/N 93830, Loop Range & Loop Height Adjustment
44" WIDE X 14-STAND ASC SELECT SERIES CAS-44-14 PANEL LINE ROLL FORMER LINE; 3-1/2" Shaft Size, GR-8 Tooling (Standard for this Industry), 18" Horizontal Centers, 44" Mill Tool Spacing, Runs 26 – 29 Gauge Galvalum & Galvanized Pre-painted Rolls, Yield 50/80 KSI, w/Two-Post Hydraulic Cut-Off, 20,000 LB ASC Select Series Single Arm Uncoiler w/ Coil Car, 20,000 LB X 48" Coil, PLC Control w/ Operators Console
(1997) 6,000 LB MICHIGAN ROLL FORM MDL. 3CH-60-B UNCOILER; S/N 20097, Manual Expander w/Air Brake, 31" Stock Width, 16" – 20" Spindle Diameter
(1986) BRADBURY FLYING SHEAR/STRAIGHTENER UNIT; SD/N 25850, Flying Cam Action Shear System, (3) Roll Breaker Unit, 3" Diameter Work Rolls w/ Individual Adjustment Thru Sprocket & Chain, 5" Diameter Air Load Pinch Rolls, 18 Gauge Max. Material Thickness, 30" Max. Material Width, 4-Way Cut-Off Blades
87 TON D & K CHICAGO STRAIGHT SIDE PRESS; 88" L-R & 25" F-B Bolster Size, Air Clutch
(1995) 252" JORNS MODEL MAXI-LINE-200-SO-MB4000-6-4 CNC FOLDING MACHINE; 6400mm Working Length, 200mm Top Beam Stroke, (6) Stands, (5) Bending Cylinders, Back Gauge Inoperable, MB4000 CNC Control
(LOT) BUTTON PUNCHES & DIES; (3) Pallets of Various Size & Quantities

ASSETS LOCATED IN SAN LUIS OBISPO, CALIFORNIA (TO BE SOLD VIA PHOTO)
(2001) PEDDINGHAUS MDL: BDL 760/SA 3-HEAD CNC BEAM DRILL: S/N: 41053, 1 1/4" Max. Drilling Capacity, 30" Max. Beam Width, 16" Max. Flange Height, 3 Drill Spindles, 75- 585 RPM Spindle Speeds (Variable), Equipped With: Fagor 825 CNC Control, Automatic Spindle Sensing, Hydraulic Beam Clamp Vise, Coolant System & Horsepower: (3) 5 Drill Heads, 7 1/2 Hydraulics

ASSETS LOCATED IN LOS ANGELES, CALIFORNIA (TO BE SOLD VIA PHOTO)
(1984) ROPCO STRADDLE LIFTER, Mdl: HD-1080S, 100,000 Lbs. Max. Lifting Capacity, 158" Max. Lift Height, 140" Max. Lift Height With Pontoons, 131" Max. Inside Clearance Between Housings, 4 Standard Hook Up Available, 12.5-Ton Rated Capacity of Each Hook, 76" Max. Distance Between Pontoons, 18" Horizontal Travel Of Trolley Less Pontoons, 34' x 18" Diameter Pontoon Size, 18' Wheel Base, 34'1" x 18' 6" x 22' Dimensions (L x W x H). Equipped With: Rebuilt And New Cummin's B Series 6 Cylinder Diesel Engine Installed In 2006, 2-New Spare Tires & Extra Parts, Automatic Transmission, Hydraulic Brakes, Operation & Parts Man. (Click Here to See Ropco Crane Under Power)

ASSETS LOCATED IN SAN MARCOS, TEXAS (TO BE SOLD VIA PHOTO)
(1997) 3,200 LB YALE Mdl: ERC040AFN36SE084 ELECTRIC FORKLIFT: S/N A814V03882W, Asset #114412, Lift Height: 194", Hours: Unknown, w/ Charger
(1997) 3,200 LB YALE Mdl: ERC040AGN36TE084 ELECTRIC FORKLIFT: S/N A814V04768X, Asset #114413, Lift Height: 194", Hours: Unknown, w/ Charger
(1997) 3,200 LB YALE Mdl: REC040AGN36TE084 ELECTRIC FORKLIFT: S/N A814V0490X, Asset #114415, Lift Height: 194", Hours: Unknown, w/ Charger
(1997) 4,000 LB NISSAN Mdl: CYMO2L255 ELECTRIC FORKLIFT: S/N CYMO-0044322, Asset # None, Lift Height: 187", Hours: Unknown, w/ Charger
7,000 LB MITSUBISHI Mdl: F035 DUAL MONOMATIC TIRE DIESEL FORKLIFT: S/N AF19A-00061, Asset #94858, Side Shifter, Lift Height: 159", Hours: 3,368
9,000 LB MITSUBISHI Mdl: FD40 DUAL MONOMATIC TIRE DIESEL FORKLIFT: S/N AF19B-00559 Asset #114416, Side Shifter, Lift Height: 159", Hours: 17,965
NSS Mdl: MANTA RS36 ELECTRIC RIDER TYPE SWEEPER: S/N 142346, Asset #114421
NSS Mdl: MANTA RS36 ELECTRIC RIDER TYPE SWEEPER: S/N 142331, Equipment #40022, Asset #114420
13,200 LB BAUMANN Mdl: AS/60/14/40 YARD STYLE SIDELOADER: S/N 5363, Asset #40003, Hours: 55,427, Tire Size: 10.00-20 NHS, Engine Type: Perkins 1004.4, Enclosed Cab, Four-Wheel Drive
NSS Mdl: MANTA RS36 ELECTRIC RIDER TYPE SWEEPER: S/N 142336, Asset #114419


ASSETS LOCATED IN ST. JOSEPH, MISSOURI (TO BE SOLD VIA PHOTO)
QUINCY 100 HP WATER COOLED AIR COMPRESSOR

ASSETS LOCATED IN DEMOPOLIS, ALABAMA (TO BE SOLD VIA PHOTO)
(1990) 24' X 3/8" CINCINNATI MDL. 3SE-24 HYDRAULIC POWER SQUARING SHEAR: S/N 46712, 3/4" Cap., 24ʼ3" Length, 60" Backgauge Front Operated Power, 65" Frontgage Range, 15" Depth of Throat, 120 IPM Speeds Full Load Down, 258 IPM Speed Return, 4 Strokes at Full Length, 21 Strokes at 24", 27 @ 12" Center Hold Downs Hyd., 37-Ton Hold Down Force, Equipped w/Squaring Arm, Front Arm Supports (2), Control Station, Electric Foot Trip & 50 HP Motor

(Tax rates will be determined by the location of the equipment.)

Registration Info

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned
   spending amount or a $2,500 Minimum Deposit in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.
ONSITE BIDDERS
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit
   or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company
   check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days ***

   PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE
   TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order
   to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.

Payment Info

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.