In Conjunction With Ashman Company Auctioneers & Appraisers & Maynards Industries

CNC Robotic Press Brakes:
(1998) Amada ASTRO-100 FCXB III – 1253 Mdl: FBD-1253MH 8-Axis CNC Robotic Press Brake S/N: 12530377 w/ Amada Multimedia Numerical Control AMNC RML39BM CNC Controls, 118.1" Table Length, 122" Max Nend Length, 106.3" Between Uprights, 15.75" Throat Depth, 5.91" Stroke, 16.54" Open Height, Amada Mdl: ERX-1210 6-axis Robotic Manipulator Loader/Unloader, AMNC RML26R Controller, HB-03 Hand Held Teach Pendant, Axis 1= 310°@110°/sec, axis 2= 200°@110°/sec, Axis 3= 145°@150°/sec, Axis 4= 330°@360°/sec, Axis 5= 250°@360°/sec, Axis 6= 330°@300°/sec, Amada Proface Digital Controller and HB-03 Hand Held Teach Pendant, Amada Mdl: ASTRO-100MH Front Mounted 5-Axis Bending Robot, X Axis 3080mm/121.1"@70.8"/sec, Y Axis 52°@80°/sec, Z Axis 770mm/30.3"@51.1"/sec, A Axis 245°@300°/sec, B Axis 360°@300°/sec, 31" x 70 1/2" Stock Loading Table, Misc Grabber Accessories.
(1997) Amada ASTRO-100 FCXB III – 1253 Mdl: FBD-1253MH 8-Axis CNC Robotic Press Brake S/N: 12530342 w/ Amada Multimedia Numerical Control AMNC RML39BM CNC Controls, 118.1" Table Length, 122" Max Nend Length, 106.3" Between Uprights, 15.75" Throat Depth, 5.91" Stroke, 16.54" Open Height, Amada Mdl: ERX-1210 6-axis Robotic Manipulator Loader/Unloader S/N: 12100086, AMNC RML26R Controller, HB-03 Hand Held Teach Pendant, Axis 1= 310°@110°/sec, axis 2= 200°@110°/sec, Axis 3= 145°@150°/sec, Axis 4= 330°@360°/sec, Axis 5= 250°@360°/sec, Axis 6= 330°@300°/sec, Amada Proface Digital Controller and HB-03 Hand Held Teach Pendant, Amada Mdl: ASTRO-100MH Front Mounted 5-Axis Bending Robot S/N: 10302025, X Axis 3080mm/121.1"@70.8"/sec, Y Axis 52°@80°/sec, Z Axis 770mm/30.3"@51.1"/sec, A Axis 245°@300°/sec, B Axis 360°@300°/sec, 31" x 70 1/2" Stock Loading Table, Misc Grabber Accessories.
(1996) 35-Ton x 48" Amada RG-35S Robotic CNC Press Brake S/N: 356628 w/ Amada NC9-EXII CNC Controls, 47.3" Table Length, 49.3" Max Bend Length, 40.2" Between Uprights, 7.88" Throat Depth, 3.94" Stroke, 14.58" Open Height, (1995) Cellrobo MINI Mdl: CR-MINI Robotic System, Fanuc LR Mate-100 Type A05B-1131-B001 6-Axis CNC Robotic Manipulator S/N: 1000072, Fanuc Teach Pendant Controls, 9" x 42" Loading Table.

Press Brakes:
(1993) 250-Ton x 127" Amada Promecam Mdl: HFBO CNC Press Brake S/N: HFBO-220-30-H30504 w/ Amada Promecam Operateur CNC Controls, 127" Table Length, 107" Between Uprights, 16" Throat Depth, 2200kn Bending Force, 180mm Stroke, 44,706 Metered Hours, Pendant and Foot Controls, 230/460VAC.
(1988) 125-Ton x 98" Amada FCXB-100D Mdl: FBD-1025E CNC Press Brake S/N: 1020131 w/ Amada NC9-EXII CNC Controls, 98.4" Bed Length, 98.6" Max Bend Length, 86.6" Between Uprights, 15.75" Throat Depth, 3.94" Stroke, 14.57" Open Height, Foot Control.
(2000) 80-Ton x 8' Amada RG-8024LD CNC Press Brake S/N: 80240092 w/ Amada LD Controls, 94.5" Table Length, 98.6" Max Bend Length, 80.7" Between Uprights, 15.75" Throat Depth, 3.94" Stroke, 14.57" Open Height, Pendant and Foot Controls, 460VAC.
(2000) 80-Ton x 8' Amada RG-8024LD CNC Press Brake S/N: 80240091 w/ Amada LD Controls, 94.5" Table Length, 98.6" Max Bend Length, 80.7" Between Uprights, 15.75" Throat Depth, 3.94" Stroke, 14.57" Open Height, Pendant and Foot Controls, 460VAC.
(1992) 80-Ton x 8' Amada Mdl: FBD-8025F CNC Press Brake Amada NC9-F 3 Axis CNC Control (To be sold via photo, located in Huntington Park, CA)
(1990) 50-Ton x 80" Amada Mdl: FBD-5020E CNC Press Brake S/N: 5200431 w/ Amada NC9-EXII CNC Controls, 78.7" Table Length, 82.1" Max Bend Length, 66.9" Between Uprights, 15.75" Throat Depth, 3.94" Stroke, 14.57" Open Height, Foot Control.
(1988) 50-Ton x 80" Amada Mdl: FBD-5020E CNC Press Brake S/N: 5200215 w/ Amada NC9-EXII CNC Controls, 78.7" Table Length, 82.1" Max Bend Length, 66.9" Between Uprights, 15.75" Throat Depth, 3.94" Stroke, 14.57" Open Height, Foot Control.
(1984) 35-Ton X 4' Amada Mdl: RG-35S Press Brake Amada NC9-EX 3 Axis Control (To be sold via photo, located in Huntington Park, CA)
(1984) 25-Ton x 48" Amada RG-25 CNC Press Brake S/N: 254995 w/ Amada NC9 CNC Controls, 47.3" Table Length, 49.3" Max Bend Length, 40.4" Between Uprights, 7.88" Throat Depth, 3.94" Stroke, 14.58" Open Height, Foot Control.
(1986) 25-Ton x 48" Amada Mdl: RG-25 CNC Press Brake Amada NC9-EX 3 Axis CNC Control (To be sold via photo, located in Huntington Park, CA)

CNC Laser Cutter:
(1996) Amada Lasmac LC-1212αII Mdl: LC1212A2 CNC Laser Contour Machine S/N: 11212307 w/ Fanuc Series 16-L CNC Controls, Fanuc Laser Mdl: C1500B 1.5kW Class IV Laser Unit with 3000 Watt Max Output 100µS CW Pulse Duration, 10.6µm Emitted Wave Length, CO2/N2/He = 5/55/40% Laser Medium, 0.3mm to 1.5mm Focusing Head, Automatic Sheet Repositioner, Floppy Disc, Koolant Koolers Mdl: HCV-7500PR-NF Cooling Unit S/N: 9632, Donaldson/Torit Mdl: SDF6 6-Element Dust Collector, 60" x 123" Ball-Top Table, 208Volt/3 Phase.

CNC Turret Punch Presses:
(1998) 30-Ton Amada VIPROS 357 QUEEN Mdl: VP305072 CNC Turret Punch Press S/N: AVQ57125 w/ Amadan O4P-C CNC Controls, 58-Station Turret, (2) Indexable Tool Stations, Automatic Sheet Repositioner, Pneumatic Punch Die Extractor, SBC Fluid Power Mdl: EX5.5 Cooling Unit S/N: 46010399, Yuken Hydraulic Unit, 50" x 146" Ball Top Table.
(1994) 30-Ton Amada VIPROS 357 Mdl: VP305072 CNC Turret Punch Press S/N: AVP57059 w/ Amadan O4P-C CNC Controls, 58-Station Turret, (2) Indexable Tool Stations, Automatic Sheet Repositioner, Pneumatic Punch Die Extractor, SBC Fluid Power Mdl: EX5.5 Cooling Unit S/N: 46006694, Yuken Mdl: U-42245D Hydraulic Unit S/N: 04595001, Obstacle Detector, Over-Table Sheet Lifter, (2) Slug Conveyors, 50" x 142" Ball Top Table.
(1995) Amada Mdl: CL-410H Full Sheet Automatic Sheet Loader S/N: C410S004 w/ Amada CNC Controls, 300mm to 1220mm Width Cap, 750mm to 3050mm Length Cap, 0.6mm to 3.4mm Thickness Cap, Vacuum Sheet Lifters, Ball Top Tables, 49" x 126" Upper Table, 48" x 120" Lower Table, Pneumatic Sheet Clamps.
(1990) 30-Ton Amada PEGA 357 Mdl: PEGA305072 CNC Turret Punch Press S/N: AA570321 w/ Amadan-O4P-C CC Controls, 58-Station Turret, (2) Indexable Tool Stations, Automatic Sheet Repositioner, Pneumatic Punch Die Extractor, 50" x 142" Ball Top Table.
(1986) Amada Mdl: MP-1220NF Automatic Sheet Loader S/N: 12202021 w/ Amada Controls, Pneumatic Sheet Lifter, 52" x 78 1/2" Table.
(1990) 30-Ton Amada PEGA 357 Mdl: PEGA305072 CNC Turret Punch Press S/N: AA570322 w/ Amadan-O4P-C CC Controls, 58-Station Turret, (2) Indexable Tool Stations, Automatic Sheet Repositioner, Pneumatic Punch Die Extractor, 50" x 142" Ball Top Table.

CNC Robotic Welders:
(1997) MotoMan Super SK6 6-Axic CNC Robotic Welding Cell S/N: MMRC-0061-0102 w/ MotoMan Type YR-SK6-C010 6-Axis Robotic Manipulator S/N: S62304-1-2-1, Yasnac-MRC Robotic Controls, Yasnac Hand Held Teach Pendant, MotoMan Moto Arc 350i MI Welding Power Source, (2)24" x 92" Work Tables, (1)24" x 31 ¼" Front Work Table, Light Curtain System, Fencing, Welding Curtains.
(1995) NuTech/MotoMan Mdl: K10S 6-Axis Gantry Style CNC Robotic Welding Cell S/N: RPN789-4Y3-5 w/ MotoMan Type YRFL-NNA10GB 6-Axis Robotic Manipulator S/N: S43936-1-1-2, MotoMan/Yasnac ERC Controls, ERC Hand Held Teach Pendant, NuTech 12' Gantry Assembly S/N: 95-002, ThermalArc 400LTS Power Source, Hobart Wire Feeder, 30" x 120" Work Table.

CNC Mill:
(1989) Fadal VMC6030 Mdl: 907-1 CNC Vertical Machining Center S/N: 8901028 w/ Fadal CNC88 Controls, 21-Station ATC, CAT-40 Taper Spindle, 7500 Max RPM, 30" x 62 1/2" Table, Coolant.

Insertion Presses:
(2000) 8-Ton x 24" Haeger 824 Window Touch Mdl: 824-WT-1H CNC Hardware Insertion Press S/N: 8WT10619 w/ Haeger Insertion Logic PLC Controls, Haeger Mdl: MAS-1 Modular Automatic Bowl Feed System S/N: 4801, Foot Control.
6-Ton x 18" Haeger Mdl: HP6 Hardware Insertion Press S/N: NA w/ Haeger Automatic Bowl Feeder, Haeger Batch Counter, Tooling, Foot Control.
6-Ton x 18" Haeger Mdl: HP6 Hardware Insertion Press S/N: NA w/ General Automation Automatic Bowl Feeder, Haeger Batch Counter, Tooling, Foot Control.
6-Ton x 18" Haeger Mdl: HP6-C-3 Hardware Insertion Press S/N: 2782 w/ Haeger Batch Counter, Tooling, Foot Control.
6-Ton x 18" Haeger Mdl: HP6-C-3 Hardware Insertion Press S/N: 2779 w/ Haeger Batch Counter, Tooling, Foot Control.

Fabrication Machinery:
Safan Type VS-255-3 100" Power Shear S/N: B5273 w/ Motorized Back Gage, Controlled Stroke Length, 60" Squaring Arm, Front Supports, Drop-Off Cart, Foot Control.
Amada Mdl: CS-220 8 5/8" x 8 5/8" x 10-Ton Cap Hydraulic Corner Notcher S/N: 543833 w/ 7/8" Stroke, (2) Squaring Arms, Foot Control.
(1986) 10 GA. x 9.84" Amada Mdl: CSW-250 Nothcher Twin Work Guides w/ Digital Readouts, Coper Notcher Attachment, 3 HP, (To be sold via photo, located in Huntington Park, CA)
Timesavers Mdl: 137-1HDMW 36" Wet-Belt Grainer S/N: 23985 w/ Single Grainer Head, 36" Belt Drive, Air Knife, Timesavers Mdl: PBF-40 Particulate Filtration and Coolant Unit S/N: 20814.
Timesavers Mdl: 137-2HDCMW 36" Wet-Belt Grainer S/N: 20228Y w/ Single Grainer Head, 36" Belt Drive, Air Knife (Needs Work).
Lewis Corp Ultrasonic Cleaning System S/N: I3623SP45113 w/ Lewis Controls, (4) 52"W x 82"L x 58"D Stainless Steel Tanks, (12) Generators, Overhead Hoist System and Budget 1-Ton Electric Hoist, 480Volt.
9-Tank Wash System w/ Tanks, Pumps, Elevated Platform, Overhead Hoist System.
Amada Mdl: TEG-160E Punch Die Grinder S/N: HH3276 w/ 6 1/2" 3-Jaw Chuck, Coolant, Cabinet Base.
Pexto Mdl: 137 37" x 16GA Cap Kick Shear S/N: 10/70 w/n Manual Back Gage.
Pexto No.418E 48" x 16/18GA Cap Slip Roll S/N: 44 w/ Stand.
24" x 48" Stroke Sander S/N: NA w/ 6" Belt, 2Hp Motor, 24" x 48" Sliding Table.
Borg Bench Model Stamping Press S/N: DN3521 w/ Punch Dies, Stand.
DiAcro Punch #1 Hand Punch S/N: B-1813 w/ Punch Dies, Stand.
Techno Isel Mdl: CPM3020 CNC Engraving Machine (NO COMPUTER) S/N: 2284 w/ 11,000 to 25,000 RPM Head, 6-Speeds, Davinci Tooling Set, 115 Volt.
Roto-Finish Mdl: RS-15 60" Dia Media Tumbler/Finishing Machine S/N: RS15-85-A5 w/ Duratuff Spray Lining.
Roto-Finish 30" Dia Media Tumbler/Finishing Machine w/ Duratuff Spray Lining (Needs Work).
10" x 10" Vibratory Tumbler.

Mills and Lathe:
Bridgeport Series 1 – 2 Hp Vertical Mill S/N: 209162 w/ Sargon Gold Standard DRO, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9" x 42" Table.
Bridgeport Series 1 – 2 Hp Vertical Mill S/N: 195311 w/ DRC DRO, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9" x 42" Table.
Bridgeport Series 1 – 2 Hp Vertical Mill S/N: 227657 w/ DRC DRO, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9" x 42" Table.
Feeler Mdl: FTL-818E Tool Room Lathe S/N: 8E119 w/ 135-2955 RPM, Inch/Metric Threading, Tailstock, 5C Collet Closer, Power Feeds, "Z" Travel Indicator, Aloris Tool Post, Splash Guard, Coolant, 220VAC-3 Phase.

Machining Support:
10" Amada Mdl: HAD-250 Automatic Hydraulic Horizontal Band Saw S/N: 250-20072 w/ Amada Controls, Hydraulic Clamping and Feeds, Chip Auger, Bundling Attachment, Conveyor, Coolant.
(1990) 10" X 11" Amada Mdl:. HFA-250W Automatic Horizontal Band Saw Programmable Control, Automatic Indexing Barfeed, Hydraulic Vises, Chip Augar, Coolant System, 5 HP. (To be sold via photo, located in Huntington Park, CA)
10" Carolina Mdl: HD10 Horizontal Band Saw S/N: HD10-036836 w/ Manual Clamping.
15" J.D.Wallace Vertical Band Saw w/ Adjustable Speed, 19" x 21" Miter Table.
6" x 18" Falcon Chevalier Mdl: FSG-618M Surface Grinder S/N: A3846028 w/ 6" x 18" Magnetic Chuck, Coolant.
5" x 12" Taft-Pierce No.1 Surface Grinder w/ Magnetic Chuck.
CutterMaster Mdl: HDT-30 Tool and Cutter Grinder S/N: I478B008 w/ 5C Air Fixture, Diamomd Wheel, Stand.
Darex Precision Drill Sharpener w/ Stand.
Delta Pedestal Drill Press w/ Commander/Johansson Multi-Drill 6-Station Drilling Head.
Amrox 12-Speed Pedestal Drill Press w/ 340-2800 RPM, 12 3/4" Dia Table.
Gamm Ind. Mdl: 36 x 24 Dry Blast Cabinet S/N: 0420901 w/ Dust Collector.
Gardner-Denver Electro-Screw Series Mdl: ES60E 60 Hp Screw Type Air Compressor S/N: 568621 w/ Precooler.
Sullair 25 Hp Rotary air Compressor S/N: NA w/ Precooler.
CHP 15 Hp Horizontal Air Compressor w/ 2-Stage Pump, 120 Gallon Tank.
Pioneer "Future Air" Mdl: HDS100A Refrigerated Air/Desiccant Style Air Dryer S/N: T13408CHGC.
120 Gallon Air Storage Tank.
Dayton 6" Pedestal Grinder.
Ryobi Mdl: BS903 9" Vertical Band Saw.
Delta 1" Belt/8" Disc Sander Combo.

Welding:
Ferranti Sciaky Type EPTMP.3 200 KVA Spot Welder S/N: 10427R w/ Sciaky Touch-Weld Controls, Pneumatic Ram, Water Cooled Head, Palm Buttons.
Hall/Sciaky Type PMC04ST 150 KVA Spot Welder S/N: 6673 w/ Pneumatic Ram, Water Cooled Head, Foot Control.
H&H/Sciaky Type PMC02ST 100 KVA Spot Welder S/N: 5448 w/ H&H Welder Controls, Pneumatic Ram, Water Cooled Head, Foot Control.
Western Arctronics Mdl: 30KVA 30 KVA x 24" Spot Welder S/N: DF674 w/ Western Arctronics Controls, Water Cooled Head, Foot Control.
Hobart Mega-MIG 450 RVS MIG Welding Power Source S/N: NA w/ Hobart 2210 Wire Feeder.
Hobart Cyber-TIG 100 Series Mdl: CT-300 300 Amp TIG Welding Power Source S/N: 12RT-38111.
Hobart TIGWave 250 AC/DC TIG Welding Power Source S/N: 397PS14432 w/ Bernard Cooler.
Hobart TIGWave 250 AC/DC TIG Welding Power Source S/N: 296WS08038 w/ Bernard Cooler.
Hobart TIGWave 250 AC/DC TIG Welding Power Source S/N: 90WS20390 w/ Tweeco TC900 Cooler.
Hobart TIGWave 250 AC/DC TIG Welding Power Source S/N: 396WS17704.
Hobart TIGWave 250 AC/DC TIG Welding Power Source S/N: 394WS42613.
Hobart Mdl: RC-256 200 Amp DC Arc Welding Power Source S/N: 84WS12554 w/ Hobart 2000 Wire Feeder.
Hobart Mdl: RC-256 200 Amp DC Arc Welding Power Source S/N: SRT-9222 w/ Hobart 27 Wire Feeder.
Aercology Mdl: CFP-15-FC16000 Fume Collection Unit S/N: 42805 w/ 3Hp Motor, Ceiling Mounted Collectors, Ducting, 460VAC.
Aercology Mdl: WA-1000CP-C1 Portable Fume Collector S/N: 42804.
Aercology Mdl: WA-1000CP-C1 Portable Fume Collector S/N: 42803.
Aercology Mdl: WA-1000CP-C1 Portable Fume Collector S/N: 42802.
Aercology Mdl: WA-1000CPC1 Portable Fume Collector S/N: 44976 (Needs Work).
(7) Bishamon 36" x 48" 2500 Lb Cap Hydraulic Scissor Lift Tables
48" x 120" Welding Table.

Painting:
Wagner Mdl: EPG Prima Powder Paint Control Module w/ Wagner Powder Paint Gun, Wagner 50L Paint Pot, Cart.
Binks Mdl: GCM2000 Powder Gun Control Module w/ Binks MPC2000 Gun, Cart.
11' x 13' Gas Fired Pass Thru Curing Oven w/ 8'W x 6 1/2'H Door Openings, Igniters, Blowers.
Binks Cleaning System.
Deco Mdl: 72 Wash Tank.
Verid Ind Mdl: XPS-750 Solvent Still S/N: MA9501432.
(4) Paint Pots.
Binks 16'w x 11'd x 9'h Paint Booth.
Binks 14'w x 13'd x 8 1/2'h Paint Booth.
Binks 10'w x 13'd x 7'h Paint Booth.
6'w x 9'd x 7'h Paint Booth.
Binks 6'w x 6'd x 7'h Paint Booth.
(2) Screen Printing Presses.
AEC Squeegee Resurfacer.
Powder Paints, Screen Printing Inks.

CMM:
(1997) Zeiss Eclipse DCC Mdl: Sys:EC,4084 TS,16BIT CMM Machine S/N: CMM970704129 w/ Zeiss Control Package, Zeiss Mdl: 60-84-26 Joystick Controller, Renishaw MH8 Probe Head, 40" x 84" x 24" Work Envelope, 59" x 97" x 16" Granite Base, Tip Sets.

Tooling:
(50) CAT-40 Taper Tooling • (2) 6" Angle-Lock Vises w/ Swivel Bases • (2) 6" Angle-Lock Vises • (50) 5C Collets • (14) R8 Collets • (120) Flex Collets • Volstro Rotary Milling Head • Bridgeport 90 degree Milling Head • (2) Procunier Tapping Heads • (2) Tapmatic Tapping Heads • 5C Spin Fixture • (4) Huot Drill and Tap Cabinets • (4) Dynabrade Pneumatic Orbital Sanders • Dynabrade Pneumatic 3/4" Belt sander • DeWalt 14.4Volt Cordless Drill • Metabo Angle Grinder • (3) Pneumatic Pop Riveters • (3) Pneumatic Nut Drivers • Makita 14" Abrasive Cutoff Saw • Dayton 1" Belt Sander • Misc Hand Tools • (2) Angle Masters • Demagnetizer • Welding and Bar Clamps

Inspection:
12" Top-Con Optical Comparator S/N: NA w/ Micrometer Objective Table, Surface and Profile Illumination, 10X, 20X, 50X Ocular Lenses, Cabinet Base and Accessories.
Starrett Crystal Pink 36" x 48" x 7 1/4" Grade "A" Granite Surface Plate w/ Stand.
36" x 48" x 6 1/4" Granite Surface Plate w/ Stand.
24" x 36" x 4 1/2" Granite Surface Plate w/ Stand.
Mitutoyo 40" Triple Beam Dial Height Gage.
Mitutoyo 24" Digital Height Gage.
(2) Mitutoyo CF Digimatic 40" Calipers.
Mitutoyo CF Digimatic 24" Caliper.
(3) Dial Test Indicators.
(2) Dial Chamfer Gages.
Nordson Hardness Tester.
(5) Indicator Bases.
Meyer Pin Gaged Sets (1) .251-.500, (2) .061-.250, (2) .011-.060.
Thread Plug and Ring Gages.

Material & Handling:
(1995) Ford F-Series 28' Box Truck LISC# 0569ME w/ Cummins/Ford 5.9L Diesel Engine, 8-Speed Trans, Air Brakes, 148,792 miles, VIN# 1FDNF80C2SVA35976.
Clark Mdl: EC500-60B 6000 Lb Cap Electric Forklift S/N: E685-88-4335FA w/ 3-Stage Mast, 154" Lift Height, Side Shift, Cushion Tires, Charger.
Clark Mdl: TMG20 3700 Lb Cap Electric Forklift S/N: TMG248-0378-7484FB w/ 3-Stage Mast, 188" Lift Height, Cushion Tires, Changer.
Toledo Weight-Plate 6000 Lb Cap 48" x 48" Digital Shipping Scale.
(4) Pallet Jacks.
(74) Sections of Pallet Racking.
(6) Cantilever Sheet Stock Material Racks.
A-Frame Style Material Storage Rack.
(2) Banding Carts.
Dayton Gas Powered Floor Sweeper w/ 5Hp Gas Engine.
Approximately 350 Pallets of Raw Sheet Stock Including Stainless Steel, Steel, Aluminum, Galvanized and Misc.

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

• Removal dates: TBA
• Removal times 8:00 AM - 4:00 PM Monday through Friday.
• No items released until payment is received in full.