Global Online Auction

NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF NORANDAL USA, INC.: (2001) HERR VOSS/STAMCO LIGHT GAUGE ALUMINUM TENSION LEVELING, STRIP CLEANING LINE & (2005) VAI INGDESI AUTOMATION FOIL COATING LINE

Auction Dates:
Starts: Monday, October 27, 2014 - 10:00pm (PDT)
Ends: Thursday, October 30, 2014 - 10:00pm (PDT)
Preview: Please Call 818-508-7034 For More Information
Auction Type: Global Online Auction
Location: 1709 Jake Alexander Blvd, Salisbury, NC 28145
Description:

(2001) HERR VOSS/STAMCO LIGHT GAUGE ALUMINUM TENSION LEVELING & CLEANING LINE 

(2001) HERR VOSS/STAMCO LIGHT GAUGE ALUMINUM TENSION LEVELING LINE: Material: Aluminum Alloys 1100, 1235, 8111 (15,000 - 30,000 PSI Yield) • Strip Width: 30" - 64.5" Maximum Trimmed • Strip Thickness: .003" - .025" • Entry Coil: 16,000# Max w/ Spool, 60" OD, 16" or 20" ID on Fiber Cores, 18.625" on 72" Long Steel Spools. Entry Coil Payoff - Top or Bottom • Exit Coil: 16,000# Max w/ Spool, 60" OD, 12", 16" & 20" ID on Fiber Cores • Line Speed: 100-1000 FPM • Elongation: 0 - 3% • Flatness: Less Than 5 I-Units • Slit Mults: 4 Max w/ 10" Minimum Slit Mult Width
Click Here For More Information.

STRIP CLEANING LINE: Hyde Oil Separator • FSI Filter Specialist Liquid Bag Type Flter Vessel, 8' Flanged Connections, Custom Piping, 78 Bag Unit, 100 Psi Rated, 1/4" NPT Guage Couplings On Inlet & Outlet W/ Manual Crank Lid Lift W/ Epr Gaskets & 1000 Micron Filter Bags • Maxon 8" Packaged Tube-O-Therm Gas Burner, Pre Piped Gas-Train & Control Panel • Maxon 6" Packaged Tube-O-Therm Gas Burner, Pre Piped Gas-Train & Control Panel • Inlet Silencer/Filter Housing Assembly W/ Mounting Hardware & Gaskets, Support Legs, Magnahelic Differential Pressure Guage W/ Air Filter & Adjustable Signal Flag 0-2" • Fume Scrubber, Duall Model FW203 W/ Self Contained Recirc System, 5000 CFM @ 3' W.C., 10 HP Blower Motor, 2 HP Pump Motor • Electrodeless Conductivity Controller • LMI Electronic Diaphragm Pump
Click Here For More Information.

Photo Gallery:

Featuring:

(2001) HERR VOSS/STAMCO LIGHT GAUGE ALUMINUM TENSION LEVELING LINE:
Material: Aluminum Alloys 1100, 1235, 8111 (15,000 - 30,000 PSI Yield)
Strip Width: 30" - 64.5" Maximum Trimmed
Strip Thickness: .003" - .025"
Entry Coil: 16,000# Max w/ Spool, 60" OD, 16" or 20" ID on Fiber Cores, 18.625" on 72" Long Steel Spools. Entry Coil Payoff - Top or Bottom
Exit Coil: 16,000# Max w/ Spool, 60" OD, 12", 16" & 20" ID on Fiber Cores
Line Speed: 100-1000 FPM
Elongation: 0 - 3%
Flatness: Less Than 5 I-Units
Slit Mults: 4 Max w/ 10" Minimum Slit Mult Width
Click Here For More Information.

STRIP CLEANING LINE:
Hyde Oil Separator
FSI Filter Specialist Liquid Bag Type Flter Vessel, 8' Flanged Connections, Custom Piping, 78 Bag Unit, 100 Psi Rated, 1/4" NPT Guage Couplings On Inlet & Outlet W/ Manual Crank Lid Lift W/ Epr Gaskets & 1000 Micron Filter Bags
Maxon 8" Packaged Tube-O-Therm Gas Burner, Pre Piped Gas-Train & Control Panel
Maxon 6" Packaged Tube-O-Therm Gas Burner, Pre Piped Gas-Train & Control Panel
• Inlet Silencer/Filter Housing Assembly W/ Mounting Hardware & Gaskets, Support Legs, Magnahelic Differential Pressure Guage W/ Air Filter & Adjustable Signal Flag 0-2"
• Fume Scrubber, Duall Model FW203 W/ Self Contained Recirc System, 5000 CFM @ 3' W.C., 10 HP Blower Motor, 2 HP Pump Motor
Electrodeless Conductivity Controller
LMI Electronic Diaphragm Pump
Click Here For More Information.

In Conjunction With Maynards Industries

Registration Info:

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
ONSITE & INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS:

IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!!
Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via wire transfer (Please Note: All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing) or cashier's check. Blank company checks may be allowed on-site in place of a deposit only with valid driver's license and matching business card. Checks will be given back at the end of the sale if buyer is not a successful bidder. OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment.

PLEASE NOTE: COMPANY CHECKS WILL NOT BE ACCEPTED FOR PAYMENT OF PURCHASES.

DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS:

Minimum: $2,500 required which allows a spending limit of $10,000.
If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent)

Example: $5,000 deposit = allows up to $20,000

You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above.

Forms of payment for deposits accepted online: CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604 OR WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to reception@biditup.com.

We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS.

Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000.
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU
ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID
ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS.
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $45 outgoing wire fee applied to final payments only.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.

Payment Info:

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 18%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info:

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.