HAAS MDL: GR-512 GANTRY ROUTER SYSTEM: X-Travels: 145", Y-Travels: 61", Z-Travels: 11", Between Columns: 62", Table Dimensions (L x W): 144"x 53", Tool Changer: Capacity 10, Type CT 40 , Max Tool Diameter: 3.5", Max Tool Weight: 12 lb; 15-hp Vector Drive • 10,000-RPM Spindle • Standard 40-Taper Tooling • Rapids up to 2,100 IPM • 10-Pocket Automatic Tool Changer • 15" Color LCD Monitor w/USB Port • Brushless Servos on All Axes • User-Friendly Haas Control • ISO Standard G-Code Programming. Click Here For More Information, Located In Missoula, MT
WQ MDL: WQ11-FE28-01-G810-480R3KP-A09 ANNEALING OVEN: Efficient Multilayered Insulation: The Furnace Is Insulated W/ 1-1/2" Of Low K Factor Ultra-High Temperature Ceramic Fiber Board As The Primary Insulation. This Is Backed Up By 2" Of 2300°f Ceramic Fiber Blanket & 1" Of Very Low K Factor Mineral Wool Board • Counter Balanced Bell Lift Construction: The Furnace Is A Rectangular Bell That Lifts Vertically From The Rigid Base. The Bell Is Supported By Two Heavy Channels From The Back, Leaving The Entire Hearth Area Exposed Without Obstruction For Easy Loading • Ceramic Fiber Hearth: The Hearth Is Layered W/ Four 1 Inch Layers Of Ceramic Fiber Blanket. The Fiber Blanket Layers Are Easily & Economically Replaced If Damaged. • UDC 3300 Program Control System: The Standard Control Is A Honeywell UDC 3300 Program Control W/ 6 Ramps & 6 Soaks. • Type R Platinum Thermocouple: A Type R Platinum Thermocouple Is Encased In An Alumina Sheath & Mounted From Underneath. This Thermocouple, Rated For 3000°f (1650°c), Will Last Practically Forever At The Temperatures In This Furnace. • Zero Fired SCR Power Control: The Power Control Is A Zero Fired SCR Power Control Which Provides Very Even Power To The Elements. • Easy To View Control Panel: All Contactors & Controls Are Located In A NEMA 1 Panel Mounted Under The Furnace To Save Floor Space. Click Here For More Information, Located In Missoula, MT
ARTIMECC MDL: IB 105-R ROD CROPPING SAW: Max Rod Length: 3000 MM • Cropping Blade Cooling W/ Running Water • Blade Cutting Speed: From 5.5 To 60.0 MM/Minute • Blade Carriage W/ Horizontal Movement • Cropping Carried Out By Means Of A Diamond Blade W/ A Diameter Of 590 MM & Thickness Of 2.5-3.1 MM • Electrowelded Steel Basement Installed On Rubber-Coated Feet • Rod Clamping Provided On Rotating Chuck At 2 Support Points W/ Manual Closure • Optional Rod Clamping Provided At 2 Fixed Support Points W/ 4 Housing Seats & Manual Closure • Cutting Blade Sliding Carriage On Recirculating-Ball Guides • Head Unit Moving Cart On Recirculating-Ball Guides • Water Discharge In A Single Point • Automatic (Programmed) Execution Of The End-Facing • Power Supply Unit • Touch Screen Control Display Installed On The Machine • Protective Guards W/ Safety Micro switches. Click Here For More Information, Located In Missoula, MT
NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF GT ADVANCED CZ LLC: HAAS GANTRY ROUTER SYSTEM, WQ ANNEALING OVEN & ARTIMECC ROD CROPPING SAW
HAAS MDL: GR-512 GANTRY ROUTER SYSTEM: X-Travels: 145", Y-Travels: 61", Z-Travels: 11", Between Columns: 62", Table Dimensions (L x W): 144"x 53", Tool Changer: Capacity 10, Type CT 40 , Max Tool Diameter: 3.5", Max Tool Weight: 12 lb; 15-hp Vector Drive • 10,000-RPM Spindle • Standard 40-Taper Tooling • Rapids up to 2,100 IPM • 10-Pocket Automatic Tool Changer • 15" Color LCD Monitor w/USB Port • Brushless Servos on All Axes • User-Friendly Haas Control • ISO Standard G-Code Programming. Click Here For More Information, Located In Missoula, MT
WQ MDL: WQ11-FE28-01-G810-480R3KP-A09 ANNEALING OVEN: Efficient Multilayered Insulation: The Furnace Is Insulated W/ 1-1/2" Of Low K Factor Ultra-High Temperature Ceramic Fiber Board As The Primary Insulation. This Is Backed Up By 2" Of 2300°f Ceramic Fiber Blanket & 1" Of Very Low K Factor Mineral Wool Board • Counter Balanced Bell Lift Construction: The Furnace Is A Rectangular Bell That Lifts Vertically From The Rigid Base. The Bell Is Supported By Two Heavy Channels From The Back, Leaving The Entire Hearth Area Exposed Without Obstruction For Easy Loading • Ceramic Fiber Hearth: The Hearth Is Layered W/ Four 1 Inch Layers Of Ceramic Fiber Blanket. The Fiber Blanket Layers Are Easily & Economically Replaced If Damaged. • UDC 3300 Program Control System: The Standard Control Is A Honeywell UDC 3300 Program Control W/ 6 Ramps & 6 Soaks. • Type R Platinum Thermocouple: A Type R Platinum Thermocouple Is Encased In An Alumina Sheath & Mounted From Underneath. This Thermocouple, Rated For 3000°f (1650°c), Will Last Practically Forever At The Temperatures In This Furnace. • Zero Fired SCR Power Control: The Power Control Is A Zero Fired SCR Power Control Which Provides Very Even Power To The Elements. • Easy To View Control Panel: All Contactors & Controls Are Located In A NEMA 1 Panel Mounted Under The Furnace To Save Floor Space. Click Here For More Information, Located In Missoula, MT
ARTIMECC MDL: IB 105-R ROD CROPPING SAW: Max Rod Length: 3000 MM • Cropping Blade Cooling W/ Running Water • Blade Cutting Speed: From 5.5 To 60.0 MM/Minute • Blade Carriage W/ Horizontal Movement • Cropping Carried Out By Means Of A Diamond Blade W/ A Diameter Of 590 MM & Thickness Of 2.5-3.1 MM • Electrowelded Steel Basement Installed On Rubber-Coated Feet • Rod Clamping Provided On Rotating Chuck At 2 Support Points W/ Manual Closure • Optional Rod Clamping Provided At 2 Fixed Support Points W/ 4 Housing Seats & Manual Closure • Cutting Blade Sliding Carriage On Recirculating-Ball Guides • Head Unit Moving Cart On Recirculating-Ball Guides • Water Discharge In A Single Point • Automatic (Programmed) Execution Of The End-Facing • Power Supply Unit • Touch Screen Control Display Installed On The Machine • Protective Guards W/ Safety Micro switches. Click Here For More Information, Located In Merrimack, NH
In Conjunction With Maynards Industries & Heritage Global Partners
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| ONSITE & INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for deposits accepted online: CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604 OR WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS. Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
| ALL DEPOSIT REFUNDS WILL BE RETURNED WITHIN 5-7 BUSINESS DAYS. |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $45 outgoing wire fee applied. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
| All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
