Global Online Auction

WAGNER POWDER COAT PAINT EQUIPMENT AUCTION

Auction Info

WAGNER POWDER COAT PAINT EQUIPMENT To Be Sold As a Bulk Package Or As Individual Lots! (A Higher Bidder On The Bulk Package Than The Combined Value Of All Bids On The Individual Lots Listed, Wins The Bulk Package & Voids All Individual Lot Bids)

Featuring: Wagner Systems Powder Feed CenterWagner HiCoat Ultrasound Sieve • Automatic Gun Controller – (8) Digitech Controllers & (2) Central Control Modules (CCM)Reciprocators EBA 6BC4 (8 Nos.) Gun With Light Curtain For Triggering (Upgraded 2008) • 3000 CFM Wheel-O-Brator Dust Collector • 75 CFM Desicant Mdl: DME030 Dryer • (4) 90° Nozzles • (2) 45° Nozzles • Peristaltic Pump


Terms & Conditions

Auction Dates

Starts
Tuesday, November 11, 2014 - 10:00am (PDT)
Ends
Thursday, November 13, 2014 - 10:00am (PDT)

Auction Type

Global Online Auction

Location

8120 Keele St, Concord, ON CN

Description

WAGNER POWDER COAT PAINT EQUIPMENT AUCTION

Featuring

WAGNER POWDER COAT PAINT EQUIPMENT To Be Sold As a Bulk Package Or As Individual Lots! (A Higher Bidder On The Bulk Package Than The Combined Value Of All Bids On The Individual Lots Listed, Wins The Bulk Package & Voids All Individual Lot Bids)

  1. Wagner Systems Powder Feed Center: Is A System From Which Fluidized Powder From A Powder Container Is Simultaneously Conveyed To Several Spray Guns. The Powder Consumption Can Be Compensated By An Optional Fresh Powder Feed Unit. (MRSP is CAD $75,000)
    General Specifications: Fresh Powder Pump Control Panel • Operation Control Panel • Fresh Powder Feed Unit • Blow-Out Manifold For Circuit Powder Feed • Vibrator Table • Powder Container Clamping Fixture • Warning Lamp • Powder Recycling System Connection • Linear Motion Unit • Level Probe • Air Gun • Cleaning Station - Click Here For More Information
  2. Wagner HiCoat Ultrasound Sieve: WAGNER HiCoat Ultrasound Sieves Provide Better Quality And Security: Dirt Is Held Back By The Small Mesh Size, Powder Is Easier To Fluidize And Thus The Application Is Better, Build Ups Are Broken Down And A Finer Uniform Surface Is Achieved. (MRSP is CAD $25,000) - Click Here For More Information
  3. Automatic Gun Controller – (8) Digitech Controller & (2) Central Control Modules (CCM): Digital Field Bus • Electrical Control Of All Applications Parameters • Memory For 1024 Recipes (Unlimited With Flashcard) • User Guidance In Five Languages • Control Of Max. 60 Powder Spray Guns • Display Function: LCD Display • Sequential Control System • Production Data Output • Calibration Function • Emergency Operation Function • Diverse Locking Functions • PCMCIA Module Slot For Software Updates And Backup Function For Recipes With Flashcard
    General Specifications: Housing B x H x D mm: 630 x 1700 x 660 • Mains (AC): 85 to 250 VAC • EMI Filter: EN 55022, Class B • Operating Temperature: 0 - +45 °C • Storage Temperature: -10 - +60 °C Central Control Module CCM-D1 Specifications: Size: B x H x D mm: 540 x 140 x 300 • Weight: Approx. 10 kg • Input Power: Max. 80 W • Degree of Protection: IP 54 - Click Here For More Information
  4. Reciprocators EBA 6B: Suitable For More Complex Automatic Coating Processes With A Maximum Of Up To 12 Powder Guns. The Reciprocator Is Fitted With 16 Rollers Ensuring Smooth Slide Stroke Movements Without Any Natural Vibrations.
    General Specifications: High Load Capacity Up To 155 Lbs • Reciprocator Slide With 16 Guide Rollers • Adjustable Limit Switches • Lip Seal • Motor Cover • Direction Of Movement: Horizontal/Vertical • Movement Range: 15.75 In. - 134 In. • Speed (Max.): 108 Ft/Min Number Of Guns (Max.): 12 • Gun Arrangement: Horizontal/Vertical - Click Here For More Information
  5. C4 (8 Nos.) Gun With Light Curtain For Triggering (Upgraded 2008): Constructed For High Coating Output, High E¬fficiency And A Long Service Life. They Offer The User Optimal Handling That Is Achieved Through The Use Of Robust Materials, A Weight-Optimized Design And A High Performance Charging And Atomization System - Click Here For More Information
    (Combined MRSP for 3,4 & 5 is CAD $120,000)
  6. 3000 CFM Wheel-O-Brator Dust Collector
  7. 75 CFM Desicant Mdl: DME030 Dryer: Part No: 61 833 0154, 75 CFM @ 125°F. (MRSP is CAD $4000)
  8. (4) 90° Nozzles
  9. (2) 45° Nozzles
    (Combined MRSP for 8 & 9 is CAD $6000)
  10. Peristaltic Pump: High Volume Powder Pump For Pumping From Cyclone Back To The Powder Center. (MRSP is CAD $10,000)

In Conjunction With Maynards Industries

Registration Info

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
ONSITE & INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS:

IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!!
Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via wire transfer (Please Note: All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing) or cashier's check. Blank company checks may be allowed on-site in place of a deposit only with valid driver's license and matching business card. Checks will be given back at the end of the sale if buyer is not a successful bidder. OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment.

PLEASE NOTE: COMPANY CHECKS WILL NOT BE ACCEPTED FOR PAYMENT OF PURCHASES.

DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS:

Minimum: $2,500 required which allows a spending limit of $10,000.
If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent)

Example: $5,000 deposit = allows up to $20,000

You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above.

Forms of payment for deposits accepted online: CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604 OR WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected].

We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS.

Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000.
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU
ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID
ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS.
PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $45 outgoing wire fee applied to final payments only.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION.

Payment Info

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.