Fluke DSP-4300 Cable Analyzer w/ Fluke DSP-4300SR Smart Remote & Accessories • Acme 3-24-40 Spot Welder, 40 KVA, 24" Throat, 7" Gap • EXEL Orbital Systems EIS-1000 Imaging System, 3" Imaging Head • (2006) Siemens/US Filter J-Press Filter Press • SmartSkim CL-600 Coolant Recycling System • (1985) Mazak Slant Turn 15 / 1000 Universal CNC Lathe • (2) (1990) Thermodynamic Engineering 11-537 Vacuum Ovens • (1987) FEMCO WNCL 20/60 Slant Bed CNC Lathe • (1989) Hansvedt DS-2 2-Axis Wire EDM • Jones & Lamson Epic 114 Optical Comparator, 14" Screen • Test & Measurement Equipment • (2) (2012) CPI/Satcom 250 W TWT Compact Medium Power Amplifiers • & Much More
THE 1st IN A SERIES OF ONLINE SALES FEATURING MACHINERY & EQUIPMENT SURPLUS TO THE ONGOING OPERATIONS OF AEROJET ROCKETDYNE
9425 Canoga Avenue, Chatsworth, CA
• SmartSkim CL-600 Coolant Recycling System, 300 Gallon Tank on Clean Side, 300 Gallon Tank on Dirty Side, Floating Suction Skimmer, 10 Micron Filter Bag, Husky 1590 Air Operated Diaphragm Pump, 'L x 4' W x 4' H, S/N 4739-2
• Acme 3-24-40 Spot Welder, 40 KVA, 24" Throat, 7" Gap, 440 Volts, S/N 5081, Comes w/ Extra Spot Welding Tips, S/N 5081
• Miller Dynasty 300 DX Tig Welder, 5-300 Amp Range in AC and DC Output, Volts: 230/460, Hertz: 60, Phase: 1/3, KW: 10.4/10.5, S/N KK150702
• Fluke DSP-4300 Cable Analyzer & Fluke DSP-4300SR Smart Remote (Comes w/Carrying Case and Accessories)
• Fluke FOS-850/1300 Fiber Optic Light Source, w/ Fluke DSP-FOM Fiber Optic Meter
• CM 2-ton Electric Hoist, Series 626, S/N V-0084FW
• Peerless C-602A Water Pump, 200 GPM, Max RPM: 3,566, H-ft.: 71, & (1) Peerless C-815G Water Pump, 133 GPM, Max RPM: 3,548, H-ft.: 125
• (2006) Siemens/US Filter J-Press Filter Press, Mdl: 470G32-6/13-1/2MYLW, 7 Plates, Max Feed Pressure: 100 PSI, Air Supply Pressure: 100 PSI, Hydraulic Clamping Pressure: 7,000 PSI, S/N F007942
• Thermotron 5200 Environmental Test Chamber, Temp. Range: 0 Deg to 180 Deg F, 2 HP, 35 Amps, & (1) GCA Precision Vacuum Oven, Mdl: 19, Temp. Range: 0 Deg to 200 Deg C, S/N 29AT-8
• Qualstar 412360 Tape Library, Max Number of Drives: 12, Number of Tapes: 360, Dimensions: 52" H x 30" W x 25" D, Comes w/ 2 Keys, S/N 907216 (Unit Is On Casters), &(1) Compaq 245162-B21 Rack, Dimensions: 67" H x 22" W x 36" D
• Leco CS-444LS Carbon/Sulfur Determinator, & (1) Leco HF-400 Carbon/Sulfur Analyzer, w/ OKI Microline 320Turbo 9 Pin Printer
• Delta Flo Supplementary Heater, Mdl: EH-4ON-348, 40 KW, 480 Volts, 3 Phase, 60 Cycle
• Rocketdyne NIPXI-1052 Controller System w/ Dell Optiplex GX620 Tower, Unit Dimensions: 6' H x 6' W x 25 1/2" D
• (1985) Mazak Slant Turn 15 / 1000 Universal CNC Lathe, Max Swing: 15", Max Machining Length: 40", Bar Capacity: 1 3/4", 8-Station Turret, Tailstock, 15 HP, Mazatrol CAM T-2 Control, S/N 57247
• Oscilloscopes
• Signal Conditioning Amplifiers
• Test Gauges
• Computer Monitors
• Webcams
• TV's
• Printers
• Storage Racking Material
• Poly Spill Drainage Containers
• Shelving Units
• Lista Cabinet & Worktables
17900 Beeline Highway, Jupiter, FL
• (2) (1990) Thermodynamic Engineering 11-537 Vacuum Ovens, Inside Dimensions: 60" W x 72" D x 72" H, Stainless Inside, Edwards E2M80 Two-Stage High Vacuum Pump, 30Kw Heater, R-12 Refrigerant, "Side Ports, Instrument Ports, Temperature/Altitude Programmer, Process Temp. Controller, 400 Degrees Fahrenheit Over Temperature Failsafe, 480V / 3Ph / 60 Hz
2001 Aerojet Road, Rancho Cordova, CA
• Reko Gantry Mill, Mdl: 11400 M.Series, S/N 9616
• (1987) FEMCO WNCL 20/60 Slant Bed CNC Lathe, 21" Swing x 28" Between Centers, 3" Bar Cap., S/N 4020
• (1989) Hansvedt DS-2 2-Axis Wire EDM, 10.5" Y-Axis & 6.5" X-Axis, 6" Max Thickness, S/N AJ09124
• Speroni Tool Presetter, Mdl: VB2, S/N 2937
• Speroni Tool Presetter, Mdl: STP 56, S/N 2936
• Baldor Bench Grinder, Mdl: 612R, 1/3 HP Motor
• Jones & Lamson Epic 114 Optical Comparator, 14" Screen, S/N C-520699
• Trane 15-Ton CU, Mdl: TTA180, S/N 12266NYLTA (NEW IN BOX)
• Intellitech EPSMS Base Panel and Keyed Emergency Power Off Button, Mdl: 20-1181 & 20-1184 (NEW IN BOX)
• ReelCraft Vacuum Hose Reel, Mdl: SD14050, S/N 120106-754 (NEW IN BOX)
• RenewAire Energy Recovery Ventilator, Mdl: EV130, S/N H135788R (NEW IN BOX)
• Cincinatti Fan 2000 CFM Exhaust Fan, Mdl: SQB1-120, S/N 1213276 (NEW IN BOX)
• Cincinatti Fan 2400 CFM Exhaust Fan, Mdl: SQB1-120, S/N 1407761 (NEW IN BOX)
• Trane 4-Ton Air Handler, Mdl: 4TEC3F60B1000AA, S/N 11284M4H1V (NEW IN BOX)
• Trane 4-Ton HPCU, Mdl: 4TWA3060, S/N 11094LKL2F (NEW IN BOX)
• Haakon Pentpak 30,000 CFM Air Handling Unit, S/N 13-8255-952-C (NEW IN BOX)
• SpecAir IDEC 30,000 CFM Air Handling Unit, Mdl: D63, S/N SAC 1012 1442 (NEW IN BOX)
3100 Lomita Boulevard, Torrance, CA
• (2) (2012) CPI/Satcom 250 W TWT Compact Medium Power Amplifier, Mdl: VZK2792J1, 18.0 - 22.0 GHz, 4.0 GHz Bandwidth, Primary Power: 220-240VAC +/-10%, Single Phase, 50/60 Hz, 15A Max, S/N J17930C3 (Unit Passed Self-Test On 5/18/2015)
Los Angeles, CA
• 5" x 5" Zeiss Mdl: 472701-9902/08 Stereo Laboratory Microscope, S/N 0092107, Equipped With Zeiss Kpl-10x/18 Eyepieces, Zeiss Epiplan 40x,80x, 4x Objectives, Melles Griot 2.5x, 4x Objectives, Four Objective Turret Assemblies, Zeiss Camera Mount, Capra Optical Light Source, Various Accessories
• 12" x 12" Nikon Measure Master Toolmakers Microscope, Motorized Head, Heidenhain Glass Scales, Equipped With: 2.5x CF Plan, 2.5x CF Plan, 20x BD Plan Objectives Nikon 10x CFWN Eyepieces, Light Source, X-Y Stage With Ball Screws, Motorized Microscope, Head With Joystick, Heindenhain Glass Scales With Readouts, Micro Mac Color Video Camera
• 2009 11.57" x 7.772" x 5.9" Objet Mdl: Alaris 30, 3D Printer, S/N 7106, Equipped With: Computer, Software Version 30.1.1.4836, Operating Manual, Elapsed Printing Time: 1,100 Hours
• 1997 50 Amps Genspark EDM (Sinker Type) Mdl: C420 S/N: 706440, Tank Size 32" x 18", Equipped With: Sargon 2 Axis Digital Readout System, Coolant System, Work Light, Note: 871 Hours On Meter
• 34" x 32" x 29" Despatch Mdl: EC519 Thermal Environmental Chamber, S/N: 158132, Number of Shelves (Adjustable) 2 Equipped With: Watlow Series 922 Digital Control, Despatch Chart Recorder, Watlow Series 365 Temperature Controls (Low-High Limit), Air Dryer
• 1997 40 Amps Belmont Astec Mdl: CDH-3A Hole Popper, S/N H3A-00325, Equipped With: Belmont Auto Z Control, Mitutoyo Digital Readout System, Servo X & Y Axis Programmable Power Feeds, DC Servo Z Axis Movement, Ball Screws, WP-3A Water Pump Unit
• Unibal Balancing Machine Mdl: OOEF-A, S/N UB6306 (2005), Variable Drill Head Feed Rate, Equipped With: 2- Suhner Horizontal Drill Heads
• 12.5 HP Ajax Mdl: HRPG-12-W Natural Gas Steam Boiler, S/N 66336, Equipped With: Honeywell Pressure Valve With Gauge, Burner Cut-Off Switch, Low Water Indicator, Main Flame Indicator, Flame Failure Indicator
• 09" x 49" Doall Mdl: GMP 200S CNC Vertical Mill, S/N 091212009C, Spindle Speeds Variable, Spindle Nose 8, Ram Travel 12" Equipped With: Trax M2, 2 Axis CNC Control (Installed 2004), 3 Axis Digital Readout In Manual Mode, Kurt Power Draw Bar, Auto Lube System, Battery Back Up, Horsepower: 3
• 1999 10" x 50" Southwest Trak Mdl: DPM CNC Vertical Mill, S/N 99- 4835, Spindle Speeds Variable, Spindle Nose #40, Equipped With: Trax Mdl: A.G.E. 3 Axis CNC Control, 3 Axis Digital Readout In Manual Mode, Kurt Power Draw Bar, Auto Lube System, Way Covers, Coolant System, Hardened & Ground Box Ways, Horsepower: 3
• 1 3/4" Bertolette Mdl: 315 Tube Cut-Off Machine, S/N 315178, Max. Feed Length Per Stroke 36", Direction Left To Right, Equipped With: Air Clamping, Air Feeding, Tooling, Horsepower: 1
• 35 KVA Onan Genset Mdl: Techstar 35 35SJBL27296C Natural Gas Generator, S/N I880159936, Amps Single Phase 121, Amps Three Phase 53, Equipped With: Temperature, Oil & Amp Gauges, Natural Gas Operated, Three Phase & Single Phase
• 1 1/2" Royal Master Mdl: TG- 12x3 Centerless Grinder, S/N 2022 (1993), Equipped With: Automatic Thrufeed Attachment, Automatic Sizing, Hydraulic Dressers, One Shot Lube System, Coolant System, Horsepower: 7 1/2
• Cranfield Mdl: 2822 CNC ID/OD Edge Grinder, S/N 3293-005, Worhead Speed 50-3000RPM
• 6 Axis Nu Tech Motoman Robotic Welder Mdl: K IOS Robotic Welding System, S/N S43936-1-1-2, Equipped With: Yasnac ERC Control With Hand Held Teach Pendant, Yasnac ENCM- RP6124 Power Supply, Thermalarc 400LTS Power Supply, Nu Tech 12' Gantry Assembly, Hobart Wire Feeder
• 8" Haas Mdl: HRC 210 4th Axis Rotary Table, Speeds 0.001-830 Degree/Sec., Through Bore 1.77"
• 10" x 17" W.F.Wells Mdl: W-10-2A Automatic Horizontal Band Saw, S/N A2629- W01516, Equipped With: Automatic Controls, Hydraulic Vises, Multi-Indexing Bar Feed, Hydraulic Blade Tension, Variable Cutting Pressure Control, Blade Break Shut Off Switch, Blade Cleaning Brush, Coolant System, Discharge Table, Horsepower: 5
• 200 Amp Hobart Mdl: RC-256 Mig Welder, S/N 84WS12554, Duty Cycle 100%, Max. OCV 38, Equipped With: Hobart 2000 Wire Feeder, Cart & Casters
• 250 Amps Hobart Mdl: Wave 250 Tig Welder, S/N 397PS14432, Duty Cycle 80%, Max. OCV 80, Equipped With: Bernard Cooler, Foot Pedal And Cart & Casters
• Hobart Wave 250 Hobart Tig Welder, Duty Cycle 60%, Max OCV 80, Equipped With: Cat & Casters
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| ONSITE & INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS: IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!! Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via: 1. Cash 2. Wire Transfer: Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing 3. Cashier's Check: Made out to Biditup Auctions Worldwide, Inc. 4. Blank Company/Corporate Checks: For deposit only with valid driver's license, matching business card & BANK LETTER OF GUARANTEE. Checks will be given back at the end of the sale if buyer is not a successful bidder OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment. DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for deposits accepted online: 1. CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604 2. WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS. Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
| ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS. |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $45 outgoing wire fee applied to final payments only. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
| All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 18%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
