<<  Back to Complete Auction Details

Live On-site and Global Webcast Auction

CNC FABRICATION FACILITY: CNC BEAM DRILL, CNC PLASMA CUTTERS, SAWS, FABRICATION MACHINERY, WELDERS & MUCH MORE

In Conjunction with Ashman Company Auctioneers & Appraisers Inc.

CNC Beam Drill
(2001) Peddinghaus Mdl: BDL 760/SA 3-Head CNC Beam Drill s/n 41053 w/ Fagor 8025MS CNC Controls, Peddimat Software, (3) 5Hp Drilling Heads, 13" Spindle Travel s, 5/16" to 1 1/16" Drill Cap, 30"W x 16 ¼"H x ¾"Thk Cap, 41.5' Max Length Cap, 13,228Lb Max Weight, 75-585 RPM, 98 Max Ft/Min Travel Speeds, Coolant, Computer.

CNC Plasma Cutters
(2003) CR Electronic Mdl: OXY 6-25 CNC Plasma/Fuel-Gas Contour Cutting Machine s/n OXY01-10-03 w/ Burny Phantom Upgraded CNC Controls and Drives, Kaliburn ProLine 2200 Hi-Definition Plasma System, Hypertherm HySpeed HT2000 Plasma Cutting Power Source s/n 2000-005506, (1) Plasma Cutting Head, (4) Fuel-Gas Cutting Heads, 8-Compartment Down-Draft Table System (32" x 102" Each), (2003) CR Electronic/Tama Mdl: PA/90-2.0/CC PULCO AIR Fume/Dust Collector s/n A21003.
K.N.Aronson Mdl: IK-1200J CNC Plasma Arc Contour Cutting Machine s/n NA w/ Edge CNC Controls, Rapid Service Voltage Positioner RSVP-100 Motor Drive Controls, Hypertherm Plasma Cutting Power Source, (2) 5' x 11' Down-Draft Tables, Custom Welding Positioner (Thru Y-Axis) with 15" 3-Jaw Chuck and (2) Barrel Guide Rolls.

Saws
Hyd-Mech Mdl: M-20A 20" x 36" CNC Hydraulic Horizontal Miter Band Saw s/n T0401227 w/ PLC Controls, Hydraulic Clamping and Feeds, (2) Hydraulic Guide Arms, Chip Auger, Coolant.
Hyd-Mech Mdl: V-18 18" CNC Hydraulic Vertical Miter Band Saw s/n K0899183 w/ PLC Controls, Miters to Plus/Minus 45 Degrees On Head, Hydraulic Clamping and Feeds, (3) Hydraulic Guide Arms, Coolant.
DoAll Mdl: C-916 9" x 16" Automatic Horizontal Band Saw s/n 501-95422 w/ DoAll Controls, Automatic Feeds and Stop, Parts Counter, Coolant.
(2) Ellis Mdl: 3000 13" Horizontal Miter Band Saws s/n's 30987108 , 30987077 w/ Manual Clamping, Conveyors.
Haberle Mdl: H350 Miter Cold Saw s/n 152260691 w/ 2-Speeds, Manual Clamping, Coolant.
(3) Edwards "Jaws IV" 100-Ton Hydraulic Ironworkers s/n's 097110099, 18810093, B070378990 w/ 12" Shear, 6" x 6" x ½" Cap Angle Shear, 1 ¼" thru 1" Punch Cap, 2 ½" x 6" x ½" Notching Head, Foot Controls, Roller Conveyor.
Edwards 25-Ton Hydraulic Ironworker s/n 01952596 w/ (2) Punching Stations, Foot Control.

Fabrication Machinery
Bliss No.5 1/2 43-Ton Stamping Press w/ Pin Clutch, 19" x 29 ½" Bolster Area, Foot Control.
Greenlee Electric Conduit Bender for 1/2" to 2" Electrical Conduit s/n PL-81490-PFH w/ Greenlee Job Box of Bending Dies and Support Equipment.
(3) Nitto Kohke Hand Held Hydraulic C-Frame Punches w/ Nitto Kohke Mdl: SC-05 Hydraulic Units.
Custom Hydraulic Lifting and Turning Station w/ Loading and Unloading Tables.
Custom Gate Forming Roll and Welding Positioner for Livestock Fences.
Custom Automatic Beam and Tube Brush Cleaning Machine w/ Adjustable RPM and Thru Speeds, Conveyors.
Custom Tube Bending Machine.
(2) Hossfeld Size 2 Manual Tube Benders.
24" Roll Beader/Shear.
36" x 22GA Manual Slip Roll w/ Stand.
(2) Swenson Corrugated Roofing/Siding Hand Shears.

Welders
Miller Big Blue 502D912 Towable Diesel Powered CV/CC DC Welding Generator s/n LC020197 w/ 42Hp 31kW Diesel Engine, Electric Start, 120/240 Volt Generator, 2566 Metered Hours, VIN# 5DLUW07151E000160.
Custom Plasma Hole Burning Machine (Dairy Industry Work) 2" Thru Holes w/ (2)H ypertherm Max43 Plasma Power Sources, Clamping and Location System, Motorized Torch Heads, Conveyors.
ThermalArc Predator Power-Plus TA 10/270H Gas Powered AC/DC-CC/CV Welding Power Source/10kVA Generator Combo s/n M92412A191707C w/ Electric Start, 115/230/460 Volt Output.
Lincoln Ranger 250 Gas Powered DC-CV/CC Welding Power Source/9000 Watt Generator Combo s/n U1030313044 w/ Electric Start, 120/240 Volt Output.
Lincoln Weldanpower 250 G9 Pro Gas Powered AC/DC Welding Power Source/9000 Watt Generator Combo s/n U1930809373 w/ Electric Start, 115/230 Volt Output.
Miller Blue Star IE 200 Amp Gas Powered AC/DC Arc Welder/3kVA Generator s/n HJ193858.
Miller CP-302 CV-DC Arc Welding Power Source s/n KJ300393 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-302 CV-DC Arc Welding Power Source s/n KJ300390 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-302 CV-DC Arc Welding Power Source s/n KJ149786 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-302 CV-DC Arc Welding Power Source s/n KG183010 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-302 CV-DC Arc Welding Power Source s/n KG204103 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller XMT300 CC/CV DC Inverter Arc Welding Power Source s/n KC318443 w/ Auto-Link.
Miller XMT300 CC/CV DC Inverter Arc Welding Power Source s/n KF856966 w/ Cart.
Miller CP-302 CV-DC Arc Welding Power Source s/n KG118027 w/ Cart.
Miller CP-302 CV-DC Arc welding Power Source s/n KJ287062.
Hobart Mdl: RC-300 300 Amp DC Arc Welding Power Source s/n 12RT-4726 w/ Cart.
PowCon Mdl: 400SM Arc Welding Power Source.
PowCon Mdl: 300SM 375 Amp Arc Welding Power Source s/ Miller S-52E Wire Feeder, Cart.
PowCon Mdl: 300SM Arc Welding Power Source.
Miller CP-252TS CV-DC Arc Welding Power Source s/n LB208263 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-252TS CV-DC Arc Welding Power Source s/n LB103046 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller CP-252TS CV-DC Arc Welding Power Source s/n LB103045 w/ Extendable Boom Reach Cart, Miller 60 Series Wire Feeder, Accu-Trak 500Lb (Barrel Feed Style) Wire Feed Source.
Miller Millermatic 250x CV-DC Arc Welding Power Source/Wire Feeder s/n KK007939.
Miller Millermatic 250 CV-DC Arc Welding Power Source s/n KG228753.
Miller Thunder Bolt 225V Arc Welding Power Source.
Hypertherm Max43 Plasma Cutting Power Source s/n MX43-007502.
Hypertherm Max43 Plasma Cutting Power Source.
Hypertherm Powermax 380 Plasma Cutting Power Source s/n 380-002346.
Victor Mdl: DC-2400 Torch Arm.
(3) Miller S-22A Wire Feed Units.
Miller 60-Series Wire Feed Unit.
Lincoln LN-25 Suitcase Wire Feeder.
PowCon Wire Feed Unit.
(2) Victor Mdl: MHT-100 Motorized Hand Torches.
(5) Welding Torch Carts.
Torch Gauges, Handles, Tips and Supplies.
54" x 225" Rolling Welding Table.
48" x 120" Rolling Welding Table.
Welding Tables.

Support Machinery
(2001) Rush-Machinery Mdl: 132C Precision Drill Sharpening Machine s/n 2479 5/ 5" 6-Jaw Chuck, Coolant.
(2) Almi Type AL100 4" Pedestal Coping Sanders.
Ellis Mdl: 8000 Variable Speed Pedestal Drill Press s/n 1339 w/ Ellis Variable Speed Controller, 16 1/2" x 18 1/2" Table.
Ellis Mdl: 6000 2 1/2" Pedestal Belt Sander s/n 60BG1471.
Rigid Mdl: 400 Motorized Pipe Threader w/ Stand.
Central Machinery 3/4Hp 8" Pedestal Grinder.
Wagner Gas Power Paint Sprayer.
SprayTech Mdl: GPX750 Airless Paint Sprayer.
SprayTech Mdl: EPX2305 Airless Paint Sprayer.
Gardner Denver Twin 15Hp Air Compressor w/ (2) 15Hp 2-Stage Pumps, 240 Gallon Air Tank, Precooler.
(2008) Falcon Mdl: B-2 5Hp Vertical Air Compressor s/n F32478 w/ 2-Stage Pump, 80 Gallon Tank.
Falcon Mdl: HTA80 5Hp Vertical Air Compressor s/n F24348 w/ 2-Stage Pump, 80 Gallon Tank.
Valsi Mdl: E22V 6Hp Portable Gas Powered Air Compressor.
(2) Valsi 7500 Watt 13Hp Gas Powered Portable Generators.
Valsi 3800 Watt Gas Powered Portable Generator.
Tsurumi Mdl: TPG3600H-DX 3600 Watt Gas Powered Generator.
Honda Mdl: EM1600 1600 Watt Gas Powered Generator.
Simpson "Water Shotgun" Gas Powered Pressure Washer w/ 11Hp OVH Gas Engine.
Whitco Fuel Oil Fired Heated Pressure Washer s/n PL09105.
Karcher 2400 PSI Pressure Washer.
(2) Izumi Mdl: 80D 3" Diesel Powered Water Pumps w/ Air Cooled 4-Strike Motors, 30 M3/Hr Cap.
Honda Mdl: WP20X Gas Powered 4Hp 2" Portable Water Pump.

Tooling
Edwards Coping, Notching and Bending Dies.
(3) Sanding Mdl: SO 168F Gas Powered Concrete Vibrators.
Knaack Rolling Job Box.
Reddy Heater 150,000 BTU Kerosene Fired Portable Heater.
Hilti Mdl: DD EC-1 Diamond Core Drilling Machine w/ Stand.
Dayton 12V Power Winch.
Milwaukee Porta-Band Band Saw.
Porter Cable Tiger Saw.
(2) Makita 14" Abrasive Cutoff Saws.
DeWalt 14" Abrasive Cutoff Saw.
(5) DeWalt, Milwaukee and Allied Electric Impacts.
(5) Milwaukee Angle Drills.
(6) Milwaukee and Makita Electric Drills.
(5) DeWalt Screw Shooters.
(6) DeWalt and Black & Decker Angle Grinders.
(2) Pneumatic Impacts.
Penncraft Router.
Skilsaw Circular Saw.
Welding Clamps, Bar and C-Clamps.
Rebar Bender.
Pipe Benders.
Chain Tensioners.
Tool Boxes and Hand Tools.
Sockets, Wrenches and Hand Tools.
(15) Sheet Clamps.
(4) Magnetic Clamps.
(4) Hydraulic Floor Jacks.
Chain, Slings, Straps, Tie-Downs and Come-Alongs.
Hydraulic Rams.
Electric Motors.
Roller Chain.
Electrical Disconnect Boxes.
Large Quantities of Anchor Bolts, Nuts, Bolts, Washers, Screws and Misc Hardware.
Shop Fans.
Safety Equipment and Lighting.
Shop Vacs.

Rolling Stock and Accessories
(1984) Ropco Straddle Lifter, Mdl:: HD-1080S, 100,000 Lbs. Max. Lifting Capacity, 158" Max. Lift Height, 140" Max. Lift Height With Pontoons, 131" Max. Inside Clearance Between Housings, 4 Standard Hook Up Available, 12.5-Ton Rated Capacity of Each Hook, 76" Max. Distance Between Pontoons, 18" Horizontal Travel Of Trolley Less Pontoons, 34' x 18" Diameter Pontoon Size, 18' Wheel Base, 34'1" x 18' 6" x 22' Dimensions (L x W x H). Equipped With: Rebuilt And New Cummin's B Series 6 Cylinder Diesel Engine Installed In 2006, 2-New Spare Tires & Extra Parts, Automatic Transmission, Hydraulic Brakes, Operation & Parts Man. (Click Here to See Ropco Crane Under Power - To be sold via photo, located in San Luis Obispo, CA - CALL AMY AT 818-508-7034 FOR INSPECTION)
(1999) Caterpillar Mdl: 307ME Excavator s/n 2PM00589 w/ Mit 4D32 Diesel Engine, 25' Parallel Offset Boom, 18" Shoe Width(Steel Tracks), 21'1" Max Ground Reach, 13'4" Max Digging Depth, Enclosed Cab, Heater, 3735 Metered Hours.
Caterpillar Mdl: TH103 10,000 Lb All Terrain Extendable Boom Lift s/n 5HK90940 P/N *3PN00757* w/ 45' Extension @ 75 Degrees, 4-Wheel Drive, 4-Wheel Steering, Outriggers.
Caterpillar Mdl: TH103 10,000 Lb All Terrain Extendable Boom Lift s/n 5HK63206 P/N *3PN00559* w/ 45' Extension @ 75 Degrees, 4-Wheel Drive, 4-Wheel Steering, Outriggers.
Caterpillar Mdl: RT80 8000 Lb Cap All Terrain Extendable Boom Lift s/n 1GJ00906 w/ Diesel Engine, 40' Extension @ 70 Degrees, 4-Wheel Drive, 4-Wheel Steering.
(2002) Combi-Lift Mdl: CL20080LA47 8000 Lb Cap Combination Forklift s/n 2392 w/ 18' Lift Height, Extendable Forks, Adjustable Forks, 90 Degree Travel, 997 Metered Hours.
Eagle-Picher Mdl: R80 8000 Lb Cap Diesel Forklift s/n 49A03365 w/ 3-Stage Tall Mast, 144" Lift Height, Fork Controller, Pneumatic Yard Tires, 2797 Metered Hours.
Nissan 50 Mdl: KAPH02A25V 4050 Lb Cap PG Forklift s/n KAPH02-900580 w/ 3-Stage Mast, 187" Lift Height, Side-Shift, Yard Tires.
Nissan APH02 4050 Lb Cap LPG Forklift s/n APH02-920528 w/ 3-Stage Mast, 187" Lift Height, Side-Shift, Yard Tires.
(1994) Ford Aeromax LTL9000 Semi Tractor Lisc# 6A74081 w/ 425 Cat Diesel Engine, 10-Speed Eaton-Fuller Trans, Sleeper Cab, Holland Hitch, 46,000 GVWR, Merrit Aluminum Headache Rack, Dual Aluminum Fuel Tanks, VIN# 1FDYA95W7SVA42233.
(1987) Ford LTL9000 Semi Tractor Lisc# 9C06507 w/ 400 Cummings Diesel Engine, 8-Speed Fuller Trans, Sleeper Cab, 46,000 GVWR, Merrit Aluminum Headache Rack, Dual Aluminum Fuel Tanks, 349,728 Miles, VIN# 1FDYA90W9HVA32299.
Trail-Eze Mdl: RS35H44 45' Dovetail Semi Trailer Lisc# 4DM2283 w/ 82,000 GVWR, Hydraulic Rear Deck Ramp, Front Winch, VIN# 1DA72C319CM006780.
(1999) Trailmobile 48' Semi Trailer Lisc# 4BJ4594 w/ 80,000 GVWR, VIN# 1PTF8ATH9X9016195.
42' Semi Trailer Lisc# 4CB9553 VIN# NA.
(2006) Ford F-350 XLT Super Duty 4X4 Crew-Cab Pickup Truck Lisc# 7Y29926 w/ 6.0L V8 Power Stroke Turbo Diesel Engine, Automatic Trans, Air Assist Suspension, Power Windows and Locks, AC, AM/FM/CD, Lumber Rack, 95,700 Miles, VIN# 1FTWW31P96EA98186.
(1996) Ford F-350XLT Crew-Cab Dually Pickup Truck Lisc# 8J39805 w/ 7.3L Direct Injection Turbo Diesel Engine, Automatic Trans, Power Windows and Locks, Cruise Control, AM/FM/CD, Dual Fuel Tanks, Ranger 250 Gas Powered 250 Amp DC-CV/CC Welding Power Source / 9000 Watt 120V/240V Generator Combo, 201,300 Miles, VIN# 1FTJW35F0TEA78108.
Ford Mdl: 3610 Tractor w/ Diesel Engine, 8-Speed Hi-Low Trans, 3-Point Hitch, 3210 Metered Hours.
(4) Caterpillar 45' Spreader Fork Attachments.
Hydraulic Auger Attachment (Round Auger Mount).
Hydraulic Auger Attachment (Hex Auger Mount).
24", 16" and 12" Hole Augers w/ Round Mounting Points.
30", (2) 22" , 10" Hole Augers w/ Hex Mounting Points.
The Major Mdl: 3014 1.75 Cu/Yd Bucket Attachment s/n 6498.
Custom 2 Cu/Yd Bucket Attachment.
(2) 18' Forklift Man Decks.
(2) 6' Forklift Man Safety Cages.
(3) Sets of Fork Extensions 6', 8' and 16'.

Materials and Handling
Steel Building Framing for 120' x 300' x 25' Building, Hot-Tip Galvanized.
Structural "I"-Beam to 60' Lengths.
Standard Rectangular Structural Steel.
5" ASTM A53A Piping to 24' Lengths.
3 1/2" ASTM A53A Piping to 21' Lengths.
4" Schedule 80 Piping.
3 1/2" Schedule 80 Piping to 21' Lengths.
Galvanized Tubing 2" and 2 1/2" to 28' Lengths.
Large Double Sided and Single Sided Material Racks.
(7) Pallet Racks.
Steel Sawhorses.
(18) Stackable Storage Bins.
(10) Heavy Duty Storage Cabinets.
(6) Banding Carts.
Budget 1-Ton Electric Hoist w/ 8' Monorail Section.
(3) CM and Budget 1-Ton Electric Hoists.
Chain Falls and Trollys.

<<  Return to Auction Details