Global Online Auction


Auction Dates:
Starts: Wednesday, August 3, 2011 - 10:00am (EDT)
Ends: Thursday, August 18, 2011 - 2:00pm (EDT)
Auction Type: Global Online Auction
Location: 1819 W. 38th Street, Anderson, IN 46013  *40 Miles Northeast of Indianapolis*


In Conjuction with Cincinnati Industrial Auctioneers & Heritage Global Partners
Kia H63 CNC Horizontal Machining Center w/ 24” Pallets (New 1998), Okuma LU-25 4-Axis CNC Turning Center (New 1998), (2) Giddings & Lewis Masterline CNC Turning Centers w/ 15” & 18” Chucks, Barber Colman FH-200 Vertical Gear Hob, (4) Barber Colman Gear Hobs (3) 14-15 & (1) 6-10, Barber Colman 10VGS Gear Shaper, Gleason 16 Gear Generator

Photo Gallery:


Kia Model H63 Four Two-Pallet CNC Horizontal Machining Center; S/N KH630095, Fanuc 15M Control, 24 ½” X 24 ½” Drilled & Tapped Pallets, 37.4” X-Axis, 32.5” Y-Axis, 29.9” Z-Axis, Spindle Speeds to 8,000 RPM, No. 50 Taper Spindle, 60-Pos. ATC, 30/25 HP Spindle Motor, Coolant System, Chip Conveyor, 75 KVA Transformer, 14” Long No. 50 Tool Bar (New 9/1998)
(190) No. 50 Taper Tool Holders of all Types
Okuma Type LU-25 Twin-Turret Four-Axis Slant Bed CNC Turning Center; S/N 0703/0068, No. 552, Okuma OSP7000 Control, 10” Kitagawa B-210 Chuck, 25.5” Swing Over Bed, 16.5” Swing Over Carriage, 12.9” Swing Over Cross Slide, 47.2” Max. Bet. Centers, 11.7” / 7.6” X-Axis (Upper/Lower) Turret Travel, 51.1” / 47.2” Z-Axis (Upper/Lower) Turret Travel, Spindle Speeds to 3500 RPM, 3.94” Spindle Hole Dia., 12-Pos. Upper Turret, 10-Pos. Lower Turret, Tailstock, Chip Conveyor, Coolant, 75 KVA Transformer (New 1998)
**Giddings & Lewis Model Masterline 50U-210 Two-Axis CNC Turning Center; S/N 532-4006-89, No. 310-01, Fanuc 10T Control, 18” Chuck, 28” Max. Swing, 22.5” / 18” Max. Turning Dia. (End/Turning) Turret, 9.25” X-Axis Travel, 78” Max. Between Centers, 14-Pos. Turret w/ 8-Turning & 8-End Working Tools, 5.19” Spindle Bore, 50 HP Motor, Chip Conveyor, Coolant Tank, 480 Volt (New 1989) – LOCATED UNDER POWER IN NORTHSTAR PLANT IN CHICAGO, INSPECTION AND REMOVAL BY APPOINTMENT ONLY WITH AUCTIONEER
Giddings & Lewis Model Masterline 40C Two-Axis CNC Turning Center; S/N 532-1005-89, No. 581-01, Fanuc 10T Control, 15” Three-Jaw Chuck, 22.5” / 18” Max. Turning Dia. (End/Turning) Turret, 9.25” X-Axis Travel, 33” Z-Axis Travel, 14-Pos. Turret w/ 8-Turning & 8-End Working Tools, 3.5” Spindle Bore, 40 HP Motor, Rohm Type SZS 68/170 Hydraulic Chucking Fixtures, Chip Conveyor, Coolant Tank Approx. 5 HP Hydraulic Unit, 480 Volt, 45 KVA Transformer (New 1989)
Fadal Model VMC-4020HT CNC Vertical Machining Center; S/N 9502067, Fadal CNC 88HS Control, 20” X 48” T-Slotted Table, 40” X-Axis, 20” Y-Axis, 28” Z-Axis, No. 40 Taper Spindle, 20-Pos. ATC, 4th-Axis Pre-Wire, 422K Memory Expansion, MP-12 Probe Interface, Rigid Tapping, Hydro Sweep Chip / Coolant System, High Speed CPU, Graphics, 1,000 Blocks Per Section (New 1995)
Zeiss Model PMC-850 Carat CNC Coordinate Measuring Machine; S/N 88115, 55” X 83” Approx. Drilled & Tapped Granite Table, 30” Max. Under Column, Zeiss Probe Head, Zeiss Control & Eclectic Cabinet, Machine disassembled for shipment and Out of Service in need of repair
Fellows Model FH-200 Vertical Gear Hobber; S/N 35899, No. 766, 7.87” Max. Workpiece Diameter, 5.08” Max. Diameter Pitch, (6) Min Number of Teeth to be Hobbed w/ Standard 1-Start Index 6 Drive, 8.46” Diameter of Worktable, 3.15” Table Bore Diameter, 0.98” - 7.48” Distance Between Table Center and Hob, 10.3” - 26.7” Distance Between Worktable and Support Bracket, 6.30” - 15.75” Position of Hob Over Table Surface, 9.45” Maximum Axial Hobbig Travel, 40 Taper, 5.51” Maximum Shift and Tangential Travel, 11.8” Maximum Workpiece Clearance (Swing Diameter) From Outer Column, 5.51” Maximum Hob Diameter, 7.09” Maximum Hob Length, 20HP Drive Motor, 3 HP Hydraulic Unit, Smaller Hydraulic Unit, 480V, 3PH, Coolant, PB Control, Durant Counter & Dro For Table, Change Gears (New 1979)
Barber Colman Model 14-15 Horizontal Gear Hobber; S/N 1424, No. 687-02, 3.5 DP – 4” Diameter Maximum DP and Diameter in Steel 1 Cut, 14” Maximum Rated Work Diameter, 15” Maximum Travel of Hob Slide, 18 ½” - 3 ½” Hob Spindle, 6” Maximum Hob Diameter, 50 Degrees Maximum Travel Angle Setting, 4 – 362 RPM Hob Speeds, 10 HP Drive Motor, 5 HP Hydraulic Unit, Double Thread Index Worm, Hydraulic Gear Box, PB Control, Coolant (New 1975)
Barber Colman Model 14-15 Horizontal Gear Hobber; S/N 1154, No. 687-01, 3.5 DP – 4” Diameter Maximum DP and Diameter in Steel 1 Cut, 14” Maximum Rated Work Diameter, 15” Maximum Travel of Hob Slide, 18 ½” - 3 ½” Hob Spindle, 6” Maximum Hob Diameter, 50 Degrees Maximum Travel Angle Setting, 4 – 362 RPM Hob Speeds, 10 HP Drive Motor, 5 HP Hydraulic Unit, Double Thread Index Worm, Hydraulic Gear Box, PB Control, Coolant (New 1967)
Barber Colman Model 14-15 Type D Horizontal Gear Hobber; S/N 163, 10 HP Drive Motor, Double Thread Index Worm, Hydraulic Locking on Rear of Chuck, PB Control, Coolant
Barber Colman Model 6-10 Horizontal Gear Hobber; S/N 5131, No. 686-65, 16DP-2” Dia. / 48DP-6” Dia. Maximum DP and Dia. In Steel 1 Cut, 6” Maximum Rated Work Diameter, 10 ½” Maximum Travel of Hob Carriage, 15 ¾” Maximum Distance Work Spindle Face to Tail Center, 12 ¾” –¼” Distance Work Spindle Face to C.L. of Hob Spindle, 3” Distance C.L. of Work Spindle to Bottom of Overarm, 2 1/16” Maximum Hob Diameter, 60 Deg. R to 90 Deg. L Maximum Swivel Angle Setting, 2 HP Drive Motor, Triple Thread Index Worm, Coolant (New 1968)
Change Gears in Crate & Tooling in Cabinet
(30) Various Gear Hobs Cutters
Barber Colman Model 10VGS Vertical Gear Shaper; S/N 11, No. 732-01, 10” Maximum External Workpieces, 10” Maximum Internal Workpieces, 4” Maximum Face Width, Maximum 40 Deg. L or R Helix Angle, 4DP Maximum Pitch, 3 1/8” Cutter Spindle Diameter, 10” Work Table OD, 3” Work Table Bore Diameter, 9 ½” Work Area Height Table to Spindle Housing, 0 to 4 1/8” Stroke Length Range, Eleven in Range of 86 to 488 Strokes Cutter Speeds Available, Cycle Selector Control, PB Control, Adj. Cutting Speed & Rotary Infeed, Coolant in Base, Approx. 7 HP Motor, 480V, 3PH (New 1968)
Gleason Model 16 Conaflex Gear Generator; S/N 23755, No. 686-02, 5 HP Motor, 9 ½” Main Head Travel, Hydraulics on Rear Head
Gleason Gear Machine; S/N 16649, 13” Vertical Head Travel, 12” In & Out Swiveling Rear Head Travel, 180 Rear Head Swivel
15” X 50” Leblond Regal Geared Head Engine Lathe; S/N 8C-3616, 12-Spindle Speeds: 45-1800 RPM, Inch Threading, Chasing Dial, 1 ½” Hole, 12” 3-Jaw Chuck, Chip Pan, 12” 4-Jaw Chuck, Aloris Quick Change Toolpost
42” Arm X 8” Col. Arboga Maskiner Type RLM-3508 Radial Arm Drill; S/N 182670, 8-Spindle Speeds to 1350 RPM, Power Elevation, 15 ½” X 19 ½” Drill Box Table, Coolant
Machine Accessories and Tooling Consisting of; (20) Skids Various Tooling Fixtures, 5C Collet Spin Fixture w/ Collets, End Mills, Hold Down Set, 6” X 12” Magnetic Chuck, Indicator Stands, Inspection Tools and Many Other Related Items
(5) Floor Standing 360 Degree Rotating Jib Cranes; All ¼ Ton, Arms From 8’ to 12’Some w/ Hoists
40” X 40” Mfg. Unknown Abrasive Blast Cabinet; 18” Dia. Rotating Table, Work Light, Flip Up Design, 20” X 30” Side Entry Door, Cyclone Reclaim Unit
7” X 12” Wilton Model 3410 Horizontal / Vertical Band Saw; S/N 0503 8865, ¾ HP Motor, 115V, ¾” Blade, Manual Vise, Coolant
1/3 HP Darex Pedestal Type D.E. Drill Sharpener Grinder; S/N 54854, 3450 RPM, 115V, 1/16” – ¾” Collet
2 HP Cincinnati Model 102 Type GTTA Double End Pedestal Grinder; 440V, 3 PH, 2” Wide Wheel
Ex-Cell-O Carboloy D.E. Carbide Tool Grinder; 9 ½” Dia. Face Grinding Wheel, 8” X 1 5/8” Grinding Wheel
U.S. Electrical Tool Co. Double End Pedestal Grinder; 440V, 3 PH, 1800 RPM Max Speed
15” Hitachi Model B16RM Floor Drill; S/N 353074, 12” Dia. Table, 12-Speeds to 3100 RPM, 120V
6” / 9” Mfg. Unknown Model BDS-9- Combination Belt & Disc Sander; S/N 0207161, 1 HP Motor, 110 Volt Date 0702
10” Everett Abrasive Cut-Off Saw; 3HP Motor, 230 / 460V, 3 PH, Cabinet Base, Extra Blades, Stop Start Switch
½ HP Sta-Rite Model PLC-2L Pump w/ Well Mate Model WM25-WB Sand Filter Tank
¾” Black & Decker Model 674 Type B Magnetic Base Drill; S/N 8380358, ¾” Capacity, 115V, Chuck
50 PSI Parker Model 10MF-40SA0100 Portable Fluid Filtration Pump; S/N 18YN, 110V
1 HP Cincinnati Fan 55 Gallon Drum Mount Vacuum; 110-Volt
Late Model Very Clean Shop Equipment Consisting of; Lift Rite Hydraulic Pallet Trucks, (10) Various Tooling Cabinets by Lista & Others, (7) Various Style No. 50 Taper Toolholders Racks, FilterMist Collector, (20+) Rubbermaid Carts, Plastic Spill Skids, Circular Saw, (4) Heavy Duty 2-Door Steel Storage Cabinets, (3) Fiberglass Step Ladders, (5) Shop Vacs, Wax Pot, Hand Tools, Hydraulic, Nylon Straps, Steel & Wood Top Work Benches, Rubbermaid Janitor Carts, Trash Cans, Brooms, Mop Buckets And Many Other Related Items
Office Equipment Consisting of; Folding, Stacking, Roller & Arm Chairs, (5) Microwaves, (20+) File Cabinets, (10+) Desks, Marker Boards, Folding Tables, Shelves, Supplies & Related

Registration Info:

For more information on registration, click here

Approx. 40 Miles Northeast of Downtown Indianapolis, IN. Exit I-69 at Exit 22 IN-9 / IN-67. Proceed 2 ½ Miles North on Dr. Martin Luther King Jr. Blvd. Go ¼ Mile East on 38th St. Arrive at Sale Site on Right. Watch for Auction Signs & Auction Parking.

Payment Info:


For more information on payment information, click here

Removal Info:


Time is of the essence with regards to the removal of the equipment from the premises. All items must be removed by AUGUST 26, 2011 AT 4:00 PM. Any items remaining after this time will be removed and stored at the expense of the buyer, subject to rent / access fees or considered abandoned and scrapped.

Industrial Riggin
Contact: JL Short
Phone: 937-877-0043
Prices Available in the Auction Catalog

TransPro Logistics - Trucking Quote
Contact: Michel Foster
Phone: 800-463-7532 Ext. 4106

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.