Dahlstrom Rafted Mill: Dahlstrom Rafted Rollforming Stands- Coil Car and Uncoiler, Embosser, Coil Reel for Re-Coiling, (3) Complete Sets of Rafted Stands & Tooling, 20 Passes Each for Powered Top and Bottom, 28" Roll Space, 24" Pass to Pass, 3.5" Arbors, Each Complete w/ Entry Guide and Flying Cutoff Dies
Dahlstrom Rafted Rollforming Line: Model 100, 30" Roll Space, ~17.5" Diameter Rolls, (2) Complete Sets of Rolls, Under Slung Mechanical Press, 29" Die Width, 2"Stroke, 60 Tons, Set up for Flying Dies, Stretch Wrap Machine, Misc Panel Options Equipment (Male Leg Machine, Corner Former, and 12" Panel)
Complete C-Purlin Line: Post Cut C-Line, AMS Controls, 16ga. C's, Cooper Weymoth Stock Reel, Lodge & Shipley Pull-Thru Straightener, Mechanical Shear & Splice Weld Station, Ardcore Flying Punch Press, Air Ram Flying Punch Press, Ardcore Rollforming Mill, Air Ram Flying Cut-Off Press (Late Delivery- Mid to Late June 2012)
Complete "Ag Panel" Sheeting Line: Stock Reel: Model 460-48, s/n: 7895, 20,000 lbs. Capacity, 48" Width, Hydrostatic Drive With Loop Arm, Belly Rolls to Run Material from the Bottom; Rollformer: Model M2 1/2-48"- 16 Passes s/n 7896, 3.5" dia. Arbors, 40 HP Single Speed Drive, Air Clutch & Brake, Work Speed 125 FPM; Roll Tooling: L-6 Material, Chromed; Airam Cutoff Press: Model ATP-650, Crop Type Cutoff Die, ECCI Length Controls; 10' Powered Conveyor; 40' Drop Arm Stacker, Double Width Tables Mounted on Track and Powered to Move Stacks to Either Side for Unloading
Hydraulic Shear No.1: Model: 375HD 20' (Heavy Duty), Length: 20', s/n: S10289, Age: Installed New in Approx 1965-1966 (One Owner), Cutting Capacity: 3/8" Machine at 20' Grade 55, Back Gauge: 48", Squaring Arm: 24", Ball Transfer in Table, Hydraulic Hold Downs: 36 Tons, Hydraulics: Motor- 30 HP @ 1800 rpm, 460V AC, Reservoir: 195 Gal, Main:1050 psi, Hold Downs: 1450psi
Hydraulic Shear No. 2: 20' Pacific Shear, 1/2"x20', 5/8"x10', Age: 1979, Model: 500R20, s/n: S10980, Hydraulic Adjustable Bed (Late Delivery: Mid to Late June 2012)
(2) Dahlstrom Presses: Under Slung Mechanical Press, 29" Die Width, 2" Stroke, 60 Tons, Extra Reconditioned Crank Shaft Available, Set up for Flying Dies
Paint Line: JBS Spray Booth, Set up for Trailer Frame Painting, (2) Heater/Dryer/Ovens with Fans and Duct Work, Frames and Wall Panel, Lighting
Kane & Roach Roll Former: 14" Roll Space, 12 Pass, 2" Arbor, 1978, Currently Configured with Side Rolls and a Corrugator pass
Memco Pinch Roll Embosser: Model 100, s/n M100-13-61, 30" Roll Space, ~17.5" Diameter Rolls, (2) Complete Sets of Rolls, Drive Motor, Complete with Motor, Gearbox, Entry Guides, and Hydraulic Unit
Air Ram: 30" Die Width, 24" Air Bag, Near New Condition
Coil Reels, Conveyor, Switch Gear, Seamers, Hat-Section Stiffener Mill & More!
Chief Industries - A Major Metal Building Manufacturer
Dahlstrom Rafted Mill: Dahlstrom Rafted Rollforming Stands- Coil Car and Uncoiler, Embosser, Coil Reel for Re-Coiling, (3) Complete Sets of Rafted Stands & Tooling, 20 Passes Each for Powered Top and Bottom, 28" Roll Space, 24" Pass to Pass, 3.5" Arbors, Each Complete w/ Entry Guide and Flying Cutoff Dies
Dahlstrom Rafted Rollforming Line: Model 100, 30" Roll Space, ~17.5" Diameter Rolls, (2) Complete Sets of Rolls, Under Slung Mechanical Press, 29" Die Width, 2"Stroke, 60 Tons, Set up for Flying Dies, Stretch Wrap Machine, Misc Panel Options Equipment (Male Leg Machine, Corner Former, and 12" Panel)
Complete C-Purlin Line: Post Cut C-Line, AMS Controls, 16ga. C's, Cooper Weymoth Stock Reel, Lodge & Shipley Pull-Thru Straightener, Mechanical Shear & Splice Weld Station, Ardcore Flying Punch Press, Air Ram Flying Punch Press, Ardcore Rollforming Mill, Air Ram Flying Cut-Off Press (Late Delivery- Mid to Late June 2012)
Complete "Ag Panel" Sheeting Line: Stock Reel: Model 460-48, s/n: 7895, 20,000 lbs. Capacity, 48" Width, Hydrostatic Drive With Loop Arm, Belly Rolls to Run Material from the Bottom; Rollformer: Model M2 1/2-48"- 16 Passes s/n 7896, 3.5" dia. Arbors, 40 HP Single Speed Drive, Air Clutch & Brake, Work Speed 125 FPM; Roll Tooling: L-6 Material, Chromed; Airam Cutoff Press: Model ATP-650, Crop Type Cutoff Die, ECCI Length Controls; 10' Powered Conveyor; 40' Drop Arm Stacker, Double Width Tables Mounted on Track and Powered to Move Stacks to Either Side for Unloading
Hydraulic Shear No.1: Model: 375HD 20' (Heavy Duty), Length: 20', s/n: S10289, Age: Installed New in Approx 1965-1966 (One Owner), Cutting Capacity: 3/8" Machine at 20' Grade 55, Back Gauge: 48", Squaring Arm: 24", Ball Transfer in Table, Hydraulic Hold Downs: 36 Tons, Hydraulics: Motor- 30 HP @ 1800 rpm, 460V AC, Reservoir: 195 Gal, Main:1050 psi, Hold Downs: 1450psi
Hydraulic Shear No. 2: 20' Pacific Shear, 1/2"x20', 5/8"x10', Age: 1979, Model: 500R20, s/n: S10980, Hydraulic Adjustable Bed (Late Delivery: Mid to Late June 2012)
(2) Dahlstrom Presses: Under Slung Mechanical Press, 29" Die Width, 2" Stroke, 60 Tons, Extra Reconditioned Crank Shaft Available, Set up for Flying Dies
Paint Line: JBS Spray Booth, Set up for Trailer Frame Painting, (2) Heater/Dryer/Ovens with Fans and Duct Work, Frames and Wall Panel, Lighting
Kane & Roach Roll Former: 14" Roll Space, 12 Pass, 2" Arbor, 1978, Currently Configured with Side Rolls and a Corrugator pass
Memco Pinch Roll Embosser: Model 100, s/n M100-13-61, 30" Roll Space, ~17.5" Diameter Rolls, (2) Complete Sets of Rolls, Drive Motor, Complete with Motor, Gearbox, Entry Guides, and Hydraulic Unit
Air Ram: 30" Die Width, 24" Air Bag, Near New Condition
Coil Reels, Conveyor, Switch Gear, Seamers, Hat-Section Stiffener Mill & More!
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. ***All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee valid for 30 days prior to the auction.*** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All internet bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
