STRAIGHT SIDE PRESSES / FEED LINES

1,500-TON BLISS SSDC, Mdl. SE2-1500-160-54, Ram Stroke 16", Ram Adjustment 12", Shut Height 36", Bed Size 160" x 54", Ram Size 160" x 54", Window Size 24", Strokes Per Minute 20, Bolster Thickness 6", S/N 30220- 1, (To be sold via photo, Located in Springfield, OH)
1,300-TON AIDA 4-POINT, Mdl. FT4-12100, 90"x188" Bed & Slide, 25.59" Stroke, 8–22 SPM, 55" Shut Height, 118" Window, (2) Rolling Bolsters, Air Clutch & Brake, S/N #1210000-0712, Rebuilt 2003, New Electrics & Lube System 2003, HMS Transfer System, #8-3A, S/N 20199-20201, Age 5/2003, 36" Max. Pitch, 8" Finger Travel, 6" Finger Lift, 116" O/L Bar Length. 50,000#x72"x.120" Mecon Space Saver Servo Feed Line, Age 2003, Capacity .120"x72"-.250"x24" Reel, Coil Car, Hold Down, Pinch Roll, Servo Feed/Straightener, Overall Length 23ʼ (Click Here to see 1,300-Ton Aida Press Under Power.)
600-TON NIAGARA SSDC, Mdl. SC2-600-120, 66"x120" Bed & Slide, 12" Stroke, 35-70 SPM, 39" Shut Height, 38" Window, Cushions, Air Clutch & Brake, S/N #P52698, Age 1987, 20,000#x36" ASL Reel with Coil Car & Hold Down, S/N 8080, Age 1987, 36"x.200" Niagara Straightener, #450-7-36, S/N F-2183, Age 1987, Dallas Ind. Servo Feed, #PRF-6-36, Capacity 36"x.187"–18"x.281", S/N 18473, Age 1994
1984 500-TON PACIFIC HYDRAULIC STRAIGHT SIDE PRESS, Max Punching Tonnage 400, Ram Stroke 18", Open Height 26", Closed Height 8", Bed Size 144" x 48", Ram Size 144" x 48", Ram Speeds: Approach 620 IPM, Forming 60 IPM, Return 330 IPM, Max Die Weight Capacity 4-1/2 Ton, Window Opening 37", Dimensions 15' x 7' x 15', Weight 105,000 Lbs (Click here to see 500-Ton Pacific Press Under Power • To be sold via photo, Located in Irvine, TX)
400-TON NIAGARA SSDC, Mdl. SC2-400-120, 60"x120" Bed & Slide, 12" Stroke, 25–50 SPM, 42" Shut Height, 37" Window, Air Clutch & Brake, S/N P53118, Age 1989, 20,000#x38" Minster Servo Feed Line, Reel with Coil Car & Hold down, 20"–24" I.D., 72" O.D., 7 Roll Straightener, #MS30-38-7, Max. Thickness .312", Servo Feed, #MEFS-6-38S, Age 1995
400-TON NIAGARA SSDC, Mdl. SC2-400-96, 48"x96" Bed & Slide, 10" Stroke, 30–60 SPM, 38" Shut Height, 36" Window, Floor Standing, Air Clutch & Brake, S/N P52435, Age 1985, 20,000#x30"x.188" Dallas Ind. Feed Line Reel with Coil Car, 20"–24" I.D., 72" O.D., Hold Down Arm, Servo Feed Straightener, #DRFS 630, Capacity 30"x.188"–18"x.250", S/N 18862-18866, Age 1995
330-TON NIAGARA SSDC, Mdl. SE2-300-84 UH, 48"x84" Bed & Slide, 8" Stroke, 30 – 80 SPM, 32" Shut Height, 32" Window, Floor Standing, Air Clutch & Brake, S/N P54004, Age 1995, 20,000#x24"x.250" Rowe Coil Cradle Straightener, Dallas Ind. Servo Feed, #DRF-424, Capacity 24"x.165"–12"x.250", S/N 17891, Age 1994
300-TON MINSTER SSDC, Mdl. E2-300-84-42, 42"x84" Bed & Slide, 6" Stroke, 80–160 SPM, 30" Shut Height, 28" Window, Floor Standing, Air Clutch & Brake, S/N 28949, Age 1996, 20,000#x26" Minster Servo Feed Line, 20,000# Double End Reel with Hold Downs, 20"–24" I.D., 72" O.D., #MR20-26D, 26"x.350" Straightener, #MS30-26-7, Servo Feed, #MEF6-26, Capacity 26"x.187"-12"x.312"
1984 220-TON KOMATSU SSDC TRANSFER PRESS, Mdl. E2P-200, Ram Stroke 15.75", Strokes Per Minute (Variable) 17-35, Bed Size 31.5" x 98.4", Ram Size 98" x 27.5", Die Height 25.59", Bolster Plate 5.91" Thick, Window in Upright 44.9" Wide, Feed & Scrap Chopper 14" Wide, Weight (Approx.) 90,000 Lbs, S/N 10013, (To be sold via photo, Located in South El Monte, CA)
(2) 220-TON NIAGARA SSDC, Mdl. SC2-200-72-42 UH, 42"x72" Bed & Slide, 6" Stroke, 55 – 110 SPM, 28" Shut Height, 26" Windows, Floor Standing, S/N 52588 & 52836, Age 1987, 10,000#x36" ASL Reel with Coil Car & Hold Down, S/N 8292, Age 1988, 24"x.132" Niagara Straightener, #350-7-24, 24" Niagara Servo Feed
(2) 180-TON MINSTER SSDC, Mdl. P2H-160, 33 1/2"x63" Bed, 3.94" Stroke, 80–250 SPM, 23" Shut Height, 25" Window, Floor Standing, S/N 29387 & 28236, Age 1998 & 1995, 6,000# Double End x 20"x.187" Minster Servo Feed Line, 16"-20" I.D., 60" O.D., Dual Hold Downs, #MSH-20-20-7 Straightener, #MEF4-20S Servo Feed, Age 1998 & 1995
1998 125-TON MINSTER SSDC, Mdl. PM3-125-48-32, Stroke 2.75", Strokes Per Minute 190-375, Bed 32" x 48", Slide 20-1/2" x 45" T-Slotted, Shut Height 20" to Bed, Bolster Plate 5" Thick, Slide Adjustment 4" Motorized, Window in Uprights 15" Wide, S/N 29529 (To be sold via photo, Located in Pontiac, MI)

STRAIGHT SIDE DOUBLE CRANK PRESS

250-TON NIAGARA SSDC, Mdl. SC2-250-72-42, 42"x72" Bed & Slide, 12" Stroke, 28 SPM, 32" Shut Height, 24" Window, Floor Standing, S/N 44981

KNUCKLE ACTION PRESS FOR COLD & WARM FORGING

(1998) 600-TON KOMATSU, Mdl. MKN-600, Ram Stroke 6.3", Ram Adjustment 2", Shut Height 22.7", Bed Size 24.8" x 35.4" x 3", Ram Size 21.3" x 23.6", Distance Between Uprights 25.6", Bed Knockout Capacity 38.5 Ton, Bed Knockout Stroke 2.8", Dimension Of Shank Hole In Slide 1.96" x 5.50" (Dia. x Depth), Strokes Per Minute 40, Depth of Pit Below Floor 60", Dimensions 105" x 95" x 136" Above Ground, Weight 52,800 Lbs., Milwaukee Power Arm S/N 180341, Model MPA- 50-24-24-24-SHV, Working Load 500 Lbs., Working Radius 48", Fanuc High Speed Robot Arm, S/N R98434696, Model LR Mate 100, Type AO5B-1134-B051, Control R-J2 Mate, Movement 5 Axis, Remote Hand Control, S/N 1956032-11 (To be sold via photo, Located in Banning, CA)

HYDRAULIC PRESSES

(1998) 200-TON MACRODYNE DOWNACTING HYDRAULIC PRESS, Mdl. MP2-200, Maximum Stripping Capacity 10 Ton, Stroke 18", Daylight Opening 24", Shut Height 6", Bed Platen Size 72" x 36", Slide Size 72" x 41.675", Floor to Top of Bolster 36", Speeds 230 IPM Fast Advance, 25 IPM Pressing, 230 IPM Rapid Retract, Hydraulics Top Mounted, Main Cylinder 5" Bore Diameter, 11" Rod Diameter, Double Acting, System Operating Pressure 3390 Max, Dimensions 101" x 88" x 195", Weight 48,000 LBS (To be sold via photo, Located in Calgary, Canada)
(1984) 150-TON DAKE HYDRAULIC 4 POST DOWNACTING PRESS, Mdl. 927-824, Upstroke Tonnage 65, Ram Stroke 27", Daylight 41", Bed & Ram Size 100" x 60", Distance Between Post 100" x 40", Ram Speeds: Advance 490 IPM, Pressing 43 IPM, Breakaway 100 IPM, Return 600 IPM, Dimensions 12' x 106" x 16' 10", Weight 60,000 LBS, S/N 183006 (To be sold via photo, Located in Fort Worth, TX)
(1999) 100-TON MACRODYNE DOWNACTING HYDRAULIC PRESS, Mdl. MPT-100, Net Lifting Capacity 5 Tons, Stripping Capacity 10 Tons, Stroke 6", Daylight 12", Shut Height 6", Bed Platen & Slide Size 64" x 40", Window 28" Wide, Top of Bolster to Floor 36", Speeds: Fast Advance 2" @200 IPM, Pressing 0.5" @ 20 IPM, Rapid Retract 2.5" @ 250 IPM, Hydraulics: Top Mounted, Main Cylinder: Bore Diameter 9", Rod Diameter 7", Doubleacting, Max System Operating Pressure 3400, Overall Dimensions 94-1/4" x 81-1/2 x 169-1/2, Weight 29,000 LBS, S/N 99115-MPT-100 (To be sold via photo, Located in Calgary, Canada)

INSERTION PRESS

(1997) PEMSERTER MDL. 2000A STUD INSERTION PRESS, 24" Throat, Bowl Feeder, PLC Control, S/N 2001A-082

GAP FRAME PRESSES

(1989) (2) 200-TON NIAGARA, Mdl. S2G-200-72-48, 48" x 72" Bed & Slide, 10" Stroke, 40 SPM, 41" Shut Height, S/N P53160 & P53159
(1994) 176-TON STAMTEC, Mdl. G2-160-S, 30" x 79" Bed, 7.9" Stroke, 30-55 SPM, 17.7" Shut Height, S/N 0249
(1987) 150-TON NIAGARA, Mdl. PN-150-72-36, 36" x 72" Bed & Slide, 6" Stroke, 40-60 SPM, 22" Shut Height, Floor Standing, S/N 52684
(1990) 88-TON NIAGARA, Bison-BN-80, 24" x 36" Bed, 6" Stroke, 40-75 SPM, 19" Shut Height, S/N 53424

OBI PRESSES

(1985) 200-TON NIAGARA, Mdl. E200S, 34" x 58" Bed, 8" Stroke, 30-60 SPM, 24" Shut Height, S/N P52210
(1986) 110-TON NIAGARA, Mdl. E110, 27" x 42" Bed, 5" Stroke, 35-70 SPM, 23" Shut Height, S/N 52508
(1986) 110-TON NIAGARA, Mdl. E110, 27" x 42" Bed, 5" Stroke, 54 SPM, 17-3/4" Shut Height, S/N 52584

HYDRAULIC PRESS BRAKE

600-TON X 16' CINCINNATI HYDRAULIC PRESS BRAKE, Length of Bed & Ram 16', Distance Between Housings 12' 6", Ram Stroke 0"- 12", Open Height 22", Ram Speeds: Approach 51 IPM, Forming 20 IPM, Return 37 IPM, Throat Depth 14", Depth of Bed Below Floor 40", Dimensions 16' x 8' x 132", Weight (Approximate) 90,000 Lbs, S/N 31508 (Click Here to see 600-Ton Cincinnati Hydraulic Press Brake Under Power • To be sold via photo, Located in Woodruff, SC)

SCRAP REMOVAL SYSTEMS

BUILDING #2: Prab 60ʼ x 36" Wide Oscillating Pan • Prab 30ʼ x 36" Wide x 6" Pitch, Steel Belt • Prab 80ʼ x 48" Wide x 6" Pitch, Steel Belt • Prab 65ʼ x 48" Wide x 6" Pitch, Steel Belt • Prab 40ʼ x 48" Wide x 30" Incline • Prab 30ʼ x 30" Wide x 4" Pitch, Steel Belt • Prab Swivel Discharge Chute • Prab PLC Control
BUILDING #3: Prab 34ʼ x 18" Wide x 4" Pitch, Steel Belt • Prab 108ʼ x 18" Wide x 4" Pitch Inclined Steel Belt • Prab 8ʼ x 36" Wide Rubber Belt • Prab 27ʼ x 24" Wide x 4" Pitch, Steel Belt • Prab 26ʼ x 18" Wide x 4" Pitch Shuttle System • Prab Discharge Chute

E-COAT LINE

DUKES INDUSTRIES INC. "PANA" E-COAT SYSTEM, Max. Package Size 8ʼ L x 3ʼ W x 5ʼ H • Pre Treatment • Stage 1 Cleaner, 140°F Gas Fired Heated Alkaline Spray • Stage 2 Cleaner, 140°F Gas Fired Immersion • Stage 3 Immersion City Water Rinse • Stage 4 Immersion Condition Rinse • Stage 5 125°F Gas Fired Immersion Tri-Metal Zinc Phosphate • Stage 6 Immersion City Water Rinse • Stage 7 Immersion Sealer Non-Chrome • Stage 8 Deionized Water Rinse • Stage 9 Drip Dry • E-Coat • Stage 10 Cathodic E-Coat • Stage 11 Permeate Spray Rinse • Stage 12 Permeate Immersion Rinse • Stage 13 Permeate or Deionized Spray Rinse • Curing Station • Bottom Entry Pre Oven • 325°F Gas Oven Zones • Cool Down Zones • With (8) 10HP Pumps, Pit Mounted Fans, Filtration System Deionized Water Treatment, DC Rectifier, Automatic Voltage Sensing & Automatic Paint Addition, Control Room, 5,500 Gallon Vertical Plastic Tank

WATER & WASTE TREATMENT

WATER & WASTE WATER EQUIPMENT CO. WASTE WATER TREATMENT SYSTEM
PARKINSON 75/55 CLARIFIER, with 120 RPM Flash Mixer
(2) FRP NEUTRALIZATION PLATFORM & TANK
(2) BRAWN BGM-33 1/3HP MIXERS
(3) PH CONTROLLERS
NEMA 12 CONTROL PANEL
(6) LMI, MDL. B CHEMICAL FEED PUMPS: 50 Gallon Polymet Tank, Polypro Sludge Holding Tank, Air Diaphragm Filter Press, Feed Pump, WWE, #630M-4 Filter Press, 4 Cu. Ft.

E-COAT LAB

OLYMPUS LECO MDL. BX60 METALLURGICAL MICROSCOPE
METASERV MDL. 2000 GRINDER POLISHER
PH METER
SCALE
VWR SCIENTIFIC MDL. 1350-FSM LAB OVEN

SPOT WELDERS

250 KVA LORS, 20" Throat, Entron Control
(2002 & 2003) (2) TECHLINE (3) POINTS, (3) ROMAN 150 KVA TRANSFORMERS, ALLEN BRADLEY 550 PLC, S/N 02148-01 & 02178-01
(2002) (3) TECHLINE DUAL POINT, (2) ROMAN 150 KVA TRANSFORMERS, ALLEN BRADLEY 550 PLC, S/N 02053
120 KVA DUAL POINT, Entron Controls
(2) 100 KVA TRANSFORMERS, 2 Head Wide Bed, Entron Control
100 KVA PEER, 18" Throat Entron Control
TECHLINE SINGLE POINT, ROMAN 150 KVA TRANSFORMER, ALLEN BRADLEY PLC
100 KVA PRECISION, 12" Throat, Entron Control
100 KVA TAYLOR WINFIELD, 18" Throat
75 KVA TAYLOR WINFIELD, 18" Throat, Solution Control, S/N 511125
75 KVA FEDERAL, 12" Throat, Entron Control, S/N 17090
(2) 50 KVA TAYLOR WINFIELD, 12" Throat, Solid State Solution Controls
50 KVA TAYLOR WINFIELD, 12" Throat, S/N 66558

WELDERS

MEGA MIG 300 R VS WELDER
(2) MILLER DELTA WELD, Mdl. 452 with Miller S-60 Wire Feed
MILLER DIALANE HF, 250 Amp Arc
(2) L & T ZUPERARC 400T, 400 Amp Mig, Wire Feed

SHEAR

(2002) 1/4" X 12' CINCINNATI MDL. 250 HS HYDRAULIC POWER SHEAR, Capacity (Mild Steel) 1/4", Max. Cutting Length 12', Rake Angle 3/8", Number of Hold Downs (Hydraulic) 14, Hold Down Force 9.9 Tons, Back Gauge Range 36", Strokes Per Minute: Short Stroke 65, Long Stroke 28, Dimensions 196" x 90" x 75", Weight 17,000 Lbs (To be sold via photo, Located in Branchburg, NJ)
NIAGARA MDL. 76, 1/4" x 7ʼ Capacity, Manual Back Gauge, S/N 42024

ROBOTS

(3) FANUC LR MATE 100IB HIGH SPEED ROBOT ARMS

EDM

(1999) EDM SOLUTIONS CRUSADER, Mdl. H435/75, 3-Axis CNC Ram Type, 8.8 KVA, Work Table Size 25 1/2" x 13 1/2", Work Tank Size 42" x 25" x 18", External Dielectric Fluid Circulation & Filtration Unit, Heidenhain Computer Control, S/N 9077

CMM

(2000) BROWN & SHARPE GLOBAL STATUS 12.22.10, 12ʼ x 5ʼ x 14" Granite Plate, Renishaw PH10MQ Probe, PC and Mist 3.2 Software

INSPECTION & LAB EQUIPMENT

(2) STARRETT GRANITE SURFACE PLATES, 36" x 48" x 6" with Stand
(2) MITUTOYO, 18" Dial Type Height Gauges
ROCKWELL PHASE II HARDNESS TESTER
LECO CUT-OFF SAW, Mdl. MSX225M
LECO SPECTRUM 1000, 2-Station Polisher
LECO PR-32 MOUNTING PRESS
OLYMPUS SZ STEREO MICROSCOPE INSTRON, Mdl. 3382, Tensile Tester with Enclosure, S/N 63097
OGP 14" BENCH TOP OPTICAL COMPARATOR
ATS MAT-2 DIGITAL HARDNESS TESTER, S/N 99MT222
MEYER PIN GAGES, BORE GAGES, GAGE BLOCKS, VERNIER CALIPERS, MICROMETERS, STEP MASTERS, TORQUE WRENCHES, DIAL BORE GAGE

TOOL ROOM

(1996) 16" X 32" OKAMOTO HYDRAULIC SURFACE GRINDER, Mdl. ACC-16-32ST, Electromagnetic Chuck with Variable Control, Incremental Feeds, S/N 88020
6" X 18" PARKER MAJESTIC SURFACE GRINDER, Sony Digital Read Out, Magnetic Chuck, S/N 2177-SCM-68
6" X 18" PARKER MAJESTIC SURFACE GRINDER, Sony Digital Read Out, Magnetic Chuck, S/N 401-S-52
5' X 12" CARLTON RADIAL DRILL, BOX TABLE, S/N 3A-4012
4' X 11" CARLTON RADIAL DRILL, S/N 1A-4090
20" X 36" TAKISAWA ENGINE LATHE, Mdl. TAL-460M, 3 Jaw Chuck, S/N Z5W-56006
9" X 24" JET BENCH LATHE, with Stand
9" X 42" BRIDGEPORT VERTICAL MILL, 1-1/2 HP, Variable Speed, S/N12BR238112
6" X 12" KALAMAZOO BELT DISC SANDER
20" POWERMATIC VERTICAL BAND SAW, with Blade Welder, S/N 9187014
(2) PARMA WORK-A-MATIC ROLL IN BAND SAW, S/N 196001 & 1086191
15" SOUTH BEND ROUND COLUMN GEAR HEAD DRILL, Mdl. B-40, S/N 578E
TRINCO MDL. 36 BP BLAST CABINET, S/N 41072-4
DUSTKOP MDL. FT40 DUST COLLECTOR, S/N 7397

4 WHEEL STRUCTURAL STEEL SHOT BLAST SYSTEM

1993 GIETART, Mdl. GW 1500-410, Part Opening Size 20" x 72", Number of Turbine Wheels: Top 2, Bottom 2, Power Per Turbine 11 KW, Infeed & Outfeed Conveyor Size 60" x 132", Max. Conveyor Load 2,200 Lbs., Conveyor Speed 47 IPM, Dimensions 22' x 105" x 212", Weight 42,000 Lbs, S/N 10452 (To be sold via photo, Located in Commerce, CO)

DIE WASH STATION

(2003) 6-1/2' X 12' PRESSURE WASH STATION, Husky Pump, Hako Wands, Plastic Holding Tank 6' X 12' PRESSURE ISLAND, Mdl. SPI, 1,000 PSI, (2) Wands, Pump, Heater, S/N 10062

DIE RACKING & STORAGE RACKS

22 SECTIONS HEAVY DUTY DIE RACKS
30 SECTIONS HEAVY DUTY DIE RACKS, with Adjustable Shelving
150 SECTIONS HEAVY DUTY PALLET RACKING

SCALES

5,000# WEIGH TRONIX, #8520, 5ʼ x 5ʼ Platform, Digital Controls
5,000# GSE, Mdl. 675, 4ʼ x 4ʼ Platform

AIR COMPRESSORS & CHILLERS

(3) GARDNER DENVER ELECTRA SAVER II, 150 HP Rotary, S/N N07577, U27364 & U27365.
HANKISON MDL. PR1200 COMPRESSED AIR DRYER, S/N 0365-2-9503-3,
HANKISON MDL. PR700 COMPRESSED AIR DRYER, S/N 366-2-9404-0016
(2011) MACAIR MDL. HX1600A-4 COMPRESSED AIR DRYER, 1600 CFM, S/N 06-11-10656MH
(3) DAVEY MDL. 50BAQ, 50 HP Rotary, S/N 02100301 & 0505031.
HANKISON AIR DRYER & VERTICAL RECEIVING TANK
GREAT LAKES MDL. GPS-500-116 HEATLESS REGENERATIVE AIR DRYER, with Oil Separator, S/N 24674
MOTTEI HYDROVANE 25 HP
QUINCY 10 HP, 2 Stage, Tank Mounted
(1996) ADVANTAGE "OPTI TEMP" 25-TON CHILLER, Mdl. EXP25AM-415BX, S/N28843
(2012) DRAKE REFRIGERATION CHILLER, Mdl. TSR200S-T4, #PAC36003-T4-Z, 30-Ton with Dual Compressors and Auxiliary Circulation Tank, S/N D12FO640 & D12FO641

ROLLING STOCK

JLG BOOM LIFT, Mdl. 45, 500 lb. x 45ʼ Capacity, S/N 14263
13,000# TOYOTA, LP Gas, Solid Tires, 185" Lift, 3 Stage Mast, S/N 60098
(1988) 3000# CROWN, Mdl. 30TSP Electric Order Picker, 231" Lift Height, S/N W-79774
(1997) 3000# CROWN, Mdl. RC3020-40-S, Electric Order Picker, S/N A185405
(2006) 3000# RAYMOND, Mdl. SACSR30T Electric Order Picker, Swing Reach, S/N SA-06-05261
(4) VESTIL PALLET TILTERS
TENNANT PROPANE FLOOR SCRUBBER, Mdl. 505-501, S/N 660204
4-WHEEL ELECTRIC CLUB CAR GOLF CART

CRANES

MICHIGAN 2-TON FREE STANDING JIB, with Yale Electric Cable Hoist, S/N 06-5016

GENERATORS
(1999) 100 KW DETROIT DIESEL SPECTRUM 100, 125 KVA, S/N 640694
(1999) DETROIT DIESEL SPECTRUM 20, Diesel, S/N 60355

VEHICLES

(1985) INTERNATIONAL F9370, 6X4 TANDEM AXLE TRACTOR, 279,619 Miles
(1995) INTERNATIONAL 4000 BOX TRUCK
(1999) FORD ECONOLINE CARGO VAN E250, 200,333 Miles
(1999) FORD WINDSTAR PASSENGER VAN, 136,208 Miles
(1999) GREAT DANE 48' TANDEM AXLE TRAILER
FLAT BED TRAILER 48' DUAL AXLE

MISCELLANEOUS

(4) 6,000KG HILMA DIE CHANGERS, HAND TOOLS, POWER HAND TOOLS, LADDERS, PARKER HOSE CRIMPER, CHOP SAW, WORK BENCHES, VISES, STORAGE CABINETS, ASSEMBLY PRESSES WITH BENCHES, BOX STAPLER, LABEL PRINTER, CONVEYORS, VIBRATORY BOWL PART FEEDER

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

• Removal dates: TBA
• Removal times 8:00 AM - 4:00 PM Monday through Friday.
• No items released until payment is received in full.