In Conjunction With Investment Recovery Services.
LOTS TO BE OFFERED IN BULK OR PIECEMEAL.
BULK BIDDING WILL TAKE PLACE ONE HOUR AFTER THE LAST INDIVIDUAL LOT HAS ENDED AND WILL BEGIN AT 5% MORE THAN THE SUM OF THE PIECEMEAL BIDS.
BIDDERS MUST SUBMIT A $100,000.00 DEPOSIT TO QUALIFY FOR BULK BIDDING.
Wash Line With Water System (To Be Sold As A Complete Wash Line or As Individual Lots) • Granulators • Shredders • Pelletizing Lines (To Be Sold As A Complete Pelletizing Lines or As Individual Lots) • Aspirators • Dryers • Blowers • Baler • Conveyors • Forklifts • Tanks • Screeners • Misc Equipment
FORMERLY OF COLL MATERIALS: COMPLETE POST CONSUMER AND INDUSTRIAL PLASTICS RECYCLING PLANT
In Conjunction With Investment Recovery Services.
LOTS TO BE OFFERED IN BULK OR PIECEMEAL.
BULK BIDDING WILL TAKE PLACE ONE HOUR AFTER THE LAST INDIVIDUAL LOT HAS ENDED AND WILL BEGIN AT 5% MORE THAN THE SUM OF THE PIECEMEAL BIDS.
BIDDERS MUST SUBMIT A $100,000.00 DEPOSIT TO QUALIFY FOR BULK BIDDING.
Wash Line With Water System: (To Be Sold As A Complete Wash Line or As Individual Lots)
Wash Line: 52" Wide Hydraulic Box Dumper; Inclined Screw Conveyor C/S; Float Sink Tank; 48" Sweco; Carter Day Spin Dryer; Hot Air Rotary Dryer; w/Burner; (2) Cyclones • Water System: (2) 3000-Gal Poly Tanks; Pump; Over Flow Tank; 60" Sweco; 30" Sweco; JWI Filer Press; Float/Sink Tank
Granulators:
Cumberland Granulator, Mdl: 3250, 25 Knife Hog Style Rotor, 300 HP, 460 Volt, 1185 Rpm Motor, S/N: 57050-93001 (Located in Cleveland, OH - To Be Sold By Photo)
Cumberland Granulator, Mdl: 50H, 20" x 50" Feed Opening, 18 Blade Solid Helical Rotor, w/ Feed Hopper, 200 Hp, 440 Volt, 1185 Rpm Motor, w/ 48" Wide x 23' Long x 10' Discharge Height Belt Conveyor, Cumberland S/N: 551000-87003 (Located in Cleveland, OH - To Be Sold By Photo)
Cumberland Granulator, Mdl: 62B, 2 Bed Knives, Three Knife Open Rotor, 200 HP 1185 RPM Motor, w/ Hopper, S/N: 86000-731 (Located in Cleveland, OH - To Be Sold By Photo)
(2000) Cumberland Granulator, Mdl: X1400, 1400mm (56") Wide x 600mm (24") Deep Chamber, 5 Knife Open Rotor, Feed Hopper, 150 Hp Motor, S/N: 48250-00005 (Located in Cleveland, OH - To Be Sold By Photo)
(2011) Cumberland Granulator, Mdl: X1400, 1400mm (56") Wide x 600mm (24") Deep Grinding Chamber w/ Hard Surfacing On Chamber, 5 Knife Open Rotor w/ Hard Surfacing, Feed Hopper, 150 Hp Motor, S/N: 48250-11006 (Located in Cleveland, OH - To Be Sold By Photo)
(2011) Cumberland Granulator, Mdl: X1400, 1400mm (56") Wide x 600mm (24") Deep Chamber, 5 Knife Open Rotor, Feed Hopper, 150 Hp Motor, S/N: 48250-11013 (Located in Cleveland, OH - To Be Sold By Photo)
Cumberland Granulator, Mdl: X1000, 1000mm (40") Wide x 600mm (24") Deep Grinding Chamber w/ Hard Surfacing On Chamber, 5 Knife Open Rotor w/ Hard Surfacing, Feed Hopper, 100 Hp Motor, 12" Diameter Side Bottom Discharge, Jackscrew Closure Mechanism For Top Hood & Screen Holder On Base (Located in Cleveland, OH - To Be Sold By Photo)
(1995) Cumberland Granulator, Mdl: 684-3KN, 17" x 26" Feed Throat, 3 Knife Open Rotor, Feed Hopper, 40 Hp, 230/460V Motor, w/ 3/8" Bottom Screen, Serial # 91000-95010 (Located in Cleveland, OH - To Be Sold By Photo)
(2007) Conair Granulator, Mdl: CW1824, 18" x 24" Feed Opening, 3 Knife Open Rotor, 25 Hp, 460 Volt Motor, w/ Sound Enclosure, S/N: 491-100708.1 (Located in Cleveland, OH - To Be Sold By Photo)
(3) Cumberland Granulator, Mdl: X1400 150 HP, S/N: 48250-11008, 48250-00004 & 48250-99010
Shredders:
(2006) Weima Mdl: WLK 18 / 2X90 V-Rotor Shredder, 2,350mm (92") Long x 1,800mm (71")Wide Intake Section, 368mm (14.5") Diameter Rotor w/ 100 Knives, 90 Rpm Rotor Speed, w/ Dual 90 Kw (120 Hp) Motors, w/ Control Panel, Includes 7.5 Kw (10 Hp) Hydraulic Systemand 0.75 Kw (1 Hp) Hydraulic Screen, Several Infeed & Take Away Conveyors, S/N: 500-7294 (Located in Cleveland, OH - To Be Sold By Photo)
(1990) SSI Dual Shaft Shredder, Mdl: 1800-E, 33" Wide x 65" Long Opeing, 2" Thick Cutters, 125 Hp, 460 Volt Motor Thru Gear Box, Feed Hopper w/ Hydraulic Stuffer Ram w/ 20 Hp 230/460 Volt Hydraulic Power Pack, On Stand w/ Approximately 60" Discharge Height, S/N: 90-124-0390 (Located in Cleveland, OH - To Be Sold By Photo)
Shred Tech Dual Shaft Shredder, Individually Driven Shafts w/ 50 Hp, 230/460 Volt Motors w/ Control Panel (Located in Cleveland, OH - To Be Sold By Photo)
Retech Single Shaft Shredder, Approx. 52" Wide Rotor w/ (37) Bolt-On Cutting Inserts, w/ Hopper, Horizontal Hydraulic Feed Ram w/ 5 Hp Power Pack, w/ 2" Screen, 100 Hp Motor, 460V, 3 Phase, S/N: 855671 (Located in Cleveland, OH - To Be Sold By Photo)
(2007) Vecoplan Single Shaft Shredder, Mdl: RG 52/100 SWU, Approximately 14-9/16" Diameter x 51-9/64" Wide Rotor w/ Bolt-On Cutting Inserts, Approximate 51-1/4" x 49" Opening w/ A Bolt On Hopper, Horizontal Hydraulic Feed Ram w/ A Power Pack, w/ Screen, Driven By Approximately 100 Hp Motor w/ Control Panel, 48" Wide x 24' Long x 11' High Discharge Height Belt Conveyor, Vecoplan S/N: 10196010 (Located in Cleveland, OH - To Be Sold By Photo)
(2011) Cumberland Mdl: ESS1200 Single Shaft Shredder w/ Bolt On Knives, Hydraulic Ram w/ Power Pack, 75 HP Motor, S/N: ZSS12001003002 (Located in Cleveland, OH - To Be Sold By Photo)
Reduction Technologies Dual Shaft Shredder, Mdl: 4220, 20" x 42" Feed Opening, Feed Hopper w/ 3 HP Prebreaker, 60 HP 230/460 Volt Main Drive, Belt Driven On Stands, w/ Tubar Lift/Dumper w/ 60" Wide x 36" Deep x 36" High Hopper, Hydraulic Lift Pump & Controls, Reduction Tech S/N: SP97018 (Located in Cleveland, OH - To Be Sold By Photo)
Retech Single Shaft Shredder, Approx. 42" Wide Rotor w/ Bolt-On Cutting Inserts, w/ Hopper, Horizontal Hydraulic Feed Ram w/ A Power Pack, w/ Screen,50 Hp Motor, S/N: 854081 (Located in Cleveland, OH - To Be Sold By Photo)
Cumberland ESS1200 Shredder, S/N: ESS12001003001
Pelletizing Lines: (To Be Sold As A Complete Pelletizing Lines or As Individual Lots)
Pelletizing Line Consisting Of: One (1) Used 8" Diameter Egan Extruder Mdl: 8035 D-H, 32:1 L/D Ratio, Vented Barrel, Electrically Heated, Water Cooled, 11.73:1 Gearbox Ratio, 600 HP DC Drive w/ Safetronics SCR, Updated Temperature Control Panel w/ 6 Barrel Zones & 1 Die Zone, Egan S/N: C00689102, One (1) Used 8" Beringer Hydraulic Screen Changer w/ 2 Hp Hydraulic Power Pack & One (1) Used Gala 7 Underwater Pelletizing System w/ 15 HP Cutting Head, S/N: 902207, w/ Die Plate & Water Box, w/ Gala 250 GPM Mdl: TWS250 Tempered Water System Serial # 942548 w/ Gala Mdl: 52VDW Spin Dryer S/N: 942548 (Located in Cleveland, OH - To Be Sold By Photo)
Pelletizing Line Consisting Of: One (1) Used 6" Davis Standard Extruder, Mdl: 60IN60R, 38:1 L/D, Electrically Heated, Water Cooled, Jacketed Feed Section, On Board Circulation System, 600 HP DC Motor w/ SCR Controller, Top Vented w/ Plug, 13.24:1 Gearbox Ratio, Skid Mounted w/ Control Panel w/ 8 Barrel Zones, 1 Screen Changer Zone & 8 Die Zones, Davis Standard S/N: R3254, New 1995, One (1) Used 6" Berringer Hydraulic Slide Plate Screen Changer w/ Dual Breaker Plates & Power Pack, S/N: 6UL108 & One (1) Used Gala Underwater Pelletizing System, Gala 7 Pelletizing Head w/ 15 HP 208-230/460 Volt 3540 Rpm Motor, Serial # 902117, w/ Gala 140 GPM Water System w/ Pump, Heat Exchanger & Heater, w/ Gala Spin Dryer Mdl: 52 VDW, w/ Blower & Control Panel (Located in Cleveland, OH - To Be Sold By Photo)
Pelletizing Line Consisting Of: One (1) Used 4.5" Davis Standard Extruder Mdl: 45IN45, Electrically Heated, Air Cooled, 30:1 L/D Ratio, Vented Barrel, 17.96:1 Gearbox Ratio, 200 HP DC Motor w/ SCR Controller, S/N: L5038, SO# 04182, One (1) Used 6" Dynesco Hydraulic Screen Changer Mdl: EH-60 w/ Hydraulic Pump, S/N: EH60471 & One (1) Used Gala Mdl: SLC 6 Underwater Pelletizing System, 5.5 HP Cutting Head w/ Die Plate & Water Box, Gala 80 GPM Mdl: TWS 80 Tempered Water System w/ Gala Mdl: 2008BF Spin Dryer, w/ Controls, S/N: 10701655 (Located in Cleveland, OH - To Be Sold By Photo)
Pelletizing Line Consisting Of: Xaloy WRP35S Water Ring Pelletizing System, S/N: VB1047, 8" Hydraulic Screen Changer w/ Power Pack & 8" Hartig Extruder, 36:1 L/D, Vented, 500 HP DC
Aspirators:
Forsberg Zig-A-FLO Aspirator Mdl: 72" ZAF-6C, Carbon Steel Construction, 4" x 72" Feed Opening, 64" High, w/ 1 Hp Vibrating Motor, S/N: 18193 (Located in Cleveland, OH - To Be Sold By Photo)
Forsberg Aspirator Mdl: 72" ZAF-6C, 72" Wide, Carbon Steel, S/N: 18194 (Located in Cleveland, OH - To Be Sold By Photo)
Dryers:
Gala Spin Dryer, Stainless Steel Construction, Mdl: 16.2 VDW/S Gala Spin Dryer, Stainless Steel Construction w/ 5 Hp, 230/460 Volt Motor, Skid Mounted w/ Water Tank, S/N: 840844 (Located in Cleveland, OH - To Be Sold By Photo)
Gala Spin Dryer Mdl: 5032BF, Stainless Steel Construction, 20 HP 230/460 Volt 1760 Rpm Motor, S/N: 10501734 (Located in Cleveland, OH - To Be Sold By Photo)
Carter Day Spin Dryer
Rotary Dryer, Approx. 3' D x 30' L, w/ 2.1 Mil BTU Propane Heater
Rotary Dryer, Approx. 3' D x 30' L, Not Complete, No Heater
Spin Dryer
Blowers:
30 HP Blower
(3) 25 HP Blower's
(4) 20 HP Blower's
Baler:
PTR Baler, Mdl:# 3400 HDES, S/N: 115596
Conveyors:
Belt Conveyor 5' W x 30' L
Belt Conveyor 3' W x 24' L
Belt Conveyor 3' W x 24' L
Belt Conveyor 30" W x 20' L
Belt Conveyor 44" W x 24' L
Belt Conveyor 32" W x 24' L
Inclined Screw Conveyor
Inclined Screw Conveyor, Approx. 10" D w/ 5' x 5' Hopper, C/S
Inclined Screw Conveyor, 6" D x 10' L, C/S
Screw Conveyor C/S
Forklifts:
(5) Electric Fork Truck
Propane Fork Truck
Guillotine 36" Wide, 30" Daylight
EZ GO Golf Cart
Tanks:
(2) Float/Sink Tank, 6' W x 20' L, w/ Paddles, C/S
Float/Sink Tank, 4' W x 30' L, w/ Paddles & Auger Discharge, C/S
(2) Poly Tank 3000 Gallon Open Top
Pump C/S
Tank 5' W x 8' L Rectangular C/S
Tank 5' D x 68" Straight Side, Flat Top & Bottom, w/ Agitator
Screeners::
Sweco Screener 72"D
(2) Sweco Screener 60"D
Sweco Screener 36" D
Sweco Screener 60" D, 1 Deck, C/S
Sweco Screener 48" D, 1 Deck, C/S
Sweco Screener 30" D, 1 Deck, S/S
Allgaier Screener, 1600mm D, 3 Deck, S/N: 4322
Misc:
Band Saw
(3) Hydraulic Box Dumpers 52" W
(10) Cyclone Separators
JWI Filter Press, Mdl: 800G32-20-10SNLS, S/N: 4469
Settling Filter, Approx 8' W x 8' L, C/S
Battery Changing Station w/ 4 Chargers & 5 Batteries
Battery Changing Station w/ 2 Chargers & 1 Battery
(3) Cross Belt Magnet 3' W x 5" L
Contents Of The Offices, Desks, Chairs, File Cabinets, Tables, Computer System, Phone System, Etc.
Contents Of The Maintenance Shop
All Scrap Metal Including Copper Wire Back To The Main Switch Gear
All Electrical Components, Controls Etc. Associated w/ The Equipment & Support
All Misc Support, Maintenance & Ancillary Items Including Fans, Material Handling, Etc.
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days *** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
