In Conjunction With Arizona Auctioneers & Maynards Industries

COMPLETE STYROFOAM/CEMENT BLOCK PLANT: TO BE OFFERED AS COMPLETE LINE & INDIVIDUALLY
• 40' x 34" Power-Pack Continuous Feed Powered Conveyor (Allen-Bradley Panelview 300 Control Runs Conveyor & Grinders)
• Vencore Solutions Top Fed Rotary Grinder, 30hp Electric Motor, 78" x 32" Housing w/Discharge Ducting, 5hp Blower
• Big W Industries Secondary 30hp Fine Grinder S/N: 2480, Contained Housing, Top Fed w/Overhead Bag Storage, Volumetric Feed To Grinder, Safeline Metal Detector, 5hp Blower
• (6) Canvas Storage Hoppers Approx. 8' W x 16' L x 24' H, V-Bottom Slide Gate Discharge
• 5hp Discharge Blower
• Cement Storage Silo, 88-Ton Capacity 10' x 24' Carbon Steel Construction, Cone Bottom, Slide Gate, Inclined 12" Diameter Screw Auger Discharge
• Sicoma Mdl. P500T08 Planetary Mixer w/Volumetric Overhead Hopper For Cement, Galvanized Volumetric Feeder For Styrofoam Material, Batch Control Panel
• GE Hot Water Heater w/300 Gal. Water Storage Tank
• Cold Shot Chiller
• Auxilary Geed Hopper, 5' x 5' x 8' Steel Construction, 30' x 6" Inclined Screw Auger
• (2007) Ingersoll-Rand 15hp Rotary Screw Air Compressor Mdl. UP6-15C-125
• 15hp Hydraulic Power Unit
• 75' x 50" Variable Speed Inclined Discharge Conveyor (Feeds Blended Material To Filler)
• 9-Station Filling & Curing Line; De-Lid, Mold Release Spray Station, Base Lock Station, Fill Station w/Hopper, Manual Pack Station, Re-Lid Station, Mold Compactor, 4-Tier Initial Mold Curing Line w/Elevator, (2) De-Mold Stations, Spray Label Station, All Conveyor Systems , Cross-Overs, Platforms & Handrails, Operator Control Stations
• Kraft Insulated Mold Curing Room, 50' W x 75' L x 20' H w/ Mold Entry Conveyor w/Turntable, Interior Racking System 3-Section, 4-Tier w/Elevator System For Entry & Exit From Curing Room, Gas Fired Forced Air Heating
• (2007) Ingersoll-Rand 30hp Rotary Screw Air Compressor Mdl. UP6-30-125 w/Ingersoll-Rand Air Dryer Mdl. NVC200A200
• Wulftec Stretch Wrap Machine
• 50+ Molds

FLOW RACKING SYSTEM: 3 Distinct Sections Of Flow Racking
Section 1: 110 Sections of Racking (11 Rows, 10 Deep) • 75' 4" D x 48' 11" W x 15' T • 2-Tier Racking w/3-Gravity Roller Rails On Each Tier • Upper Tier Is 11' 1" From Ground Level, 10' 2" From Lower Rolls • Each Row Is 4' 5" W • 11 Rows In Section 1 • Bolted Rails & Bolted Gravity Roller Rails • The Rails Are 96" Long & There Are No Gaps In The Rails, Top or Bottom
Section 2: 110 Sections of Racking (11 Rows, 10 Deep) • 75' 4" D x 48' 11" W x 15' T • 2-Tier Racking w/3-Gravity Roller Rails On Each Tier • Upper Tier Is 11' 1" From Ground Level, 10' 2" From Lower Rolls • Each Row Is 4' 5" W • 11 Rows In Section 1 • Bolted Rails & Bolted Gravity Roller Rails • The Rails Are 96" Long & There Are No Gaps In The Rails, Top or Bottom
Section 3: 50 Sections of Identical Racking • 75' 4" D x 22' 4.5" W x 15' T

• 10' x 30' Mac Dust Collector, Mdl. 144MCF255W, Carbon Steel Construction, Cone Bottom, Motorized Rotary Gate, S/N: 72054-001-1, w/100hp Twin City Blower
• Yale Sideshift Forklift Mdl. GLC060TGNAE084, 6000#, Propane, Solid Tire, Tri-Mast, S/N: E187V10236W
• Wulftec WSML-150-B Stretch Wrap Machine, 60" Turntable, S/N: 30962-6-0506
• Pallet Racking: 115 Uprights, Cross Beams, Etc.
• Shop Built H-Frame Press
• 36" Tannewitz Vertical Band Saw S/N: 15690

MISC. SHOP EQUIPMENT:
(2) 4' x 4' Digital Platform Scales, Dump Bins, Die Carts, Rolling Stairs, Hand Trucks, Pallet Jack, Chop Saws, Angle Grinders, Drills, Hand Tools, Lincoln ARC Welder, Lincoln MIG Welder, Torch Sets, Tool Boxes, Spare Parts, Motors, Lg. Qty. Construction Site Debris Totes.