Vinyl Welders – Vertical & Horizontal • Corner Cleaner • Patio Door Line • Insulated Glass Panel Line • Saws – All Types • Frame Routers • GED Integrid Rollforming Line • CNC Granite Polishing Table • Window Shop Equipment • Woodworking Equipment • Fiberglass Equipment (Lines To Be Offered Separate & Overall) • Rack • Lift Trucks • Air Compressors • Vehicles • Office • $2MM Raw Material, Finished Goods & Parts Inventory
ARMACLAD WINDOWS A DIVISION OF SOUND SOLUTIONS - MODERN VINYL AND FIBERGLASS WINDOW MANUFACTURING FACILITY INCLUDING STURTZ VINYL WELDERS & CNC SAWS, KENT FIBERGLASS WINDOW EQUIPMENT, SIMEC INSULATED GLASS LINE & MUCH MORE
VINYL WELDERS – VERTICAL & HORIZONTAL
2006 Sturtz Mdl: SMI-VSM-30/26-PDS Four-Point Vertical CNC Vinyl Welder; S/N 7479, 12" X 12" Min Window Size, 120" X 100" Max Window Size, 5" Max Profile Width
2009 Sturtz Mdl: SMI-VSM-20/19-CDS Four-Point Vertical CNC Vinyl Welder; S/N 120140, 11-1/2" X 11-1/2" Min Window Size, 72" X 72" Max Window Size, 5" Max Profile Width
2008 Sturtz Mdl: SMI-VSM-30/26-PDS Four-Point Vertical CNC Vinyl Welder; S/N 7584, 12" X 12" Min Window Size, 120" X 100" Max Window Size, 5" Max Profile Width
2001 Sturtz Mdl: SMI-VSM-30/19 Four-Point Vertical CNC Vinyl Welder; S/N 120020, 11-1/2" X 11-1/2" Min Window Size, 72" X 120" Max Window Size, 5" Max Profile Width
2003 Sturtz Mdl: HSM-30/25-DS Four-Point Horizontal CNC Vinyl Welder; S/N 110148, 12" X 12" Min Window Size, 120" X 100" Max Window Size, 5" Max Profile Width
2004 Sturtz Mdl: SMI-CNC-2K-18 Two-Point Horizontal CNC Vinyl Welder; S/N 40044
2000 Sturtz Mdl: SE-HSM-2K-DS Two-Point Horizontal CNC Vinyl Welder; S/N 210009, 1" Min Profile Height, 5.75" Max Profile Height, 13.5" Min Window Size, 112" Max Window Size
Sampson Mdl: PC-4000 Two-Point Horizontal Vinyl Welder; S/N 98626, Digital Keypad Control
CORNER CLEANER
Sampson Mdl: CM-2000 Corner Cleaner; S/N 90234, Foot Pedal Control
PATIO DOOR LINE
Sampson Mdl: SW2000 Two-Point Joining Welder; S/N 040010
Sampson Mdl: CM4000 Corner Cleaner; S/N 041720
Sampson Mdl: MN-300 Mitre Notch Saw w/ DRO & 10' Gauge; S/N 02180030
Kent Three-Head Punch
Kent Patio Door Router; S/N 4397
INSULATED GLASS PANEL LINE
New 2005 Simec Vertical Semi-Automatic Insulated Glass Line; Mdl: Bela/160 Infeed, Mdl: LAV/160-3/20 Heated Washer/Dryer, Mdl: Bula/160 Light Inspection Station, Mdl: BDPV-150 Buffer Station, Transfer Section, Mdl: BTCRR/160 Automatic Tilting Table, Mdl: BAPO/160 Automatic Sealer Applicator Table, Mdl: BRCA1/160 Air Actuated Transfer Table, (3) Transfer Sections, Pass-Thru Oven, Mdl: PARVDS/160 Roll Press Section, Mdl: BUPPRV/160 Unload/Sealing Section
SAWS – ALL TYPES
2008 Sturtz Mdl: SD-5000-S5 CNC Automatic Double Compound Mitre Saw; S/N 28951, 20" Dia., 130" Max Width, 3.6 HP Motor, 12" Min Cut Length, 120" Max Cut Length, Dust Collection System, Digital Keypad Control
1999 Sturtz Mdl: SD-6000 CNC Automatic Double Compound Mitre Saw; S/N N/A, Approx. 24' Bar Feed, CNC Control
Joseph Mdl: DM-4590 D.E. Automatic CNC Saw; S/N 3400-7-410
Sampson Mdl: MN/200 Mitre Notch Saw; S/N 0298258 • 10' Tigerstop Digital Feed (Late)
2006 Pistorious Mdl: SC-12-PV Cut- Off Saw • 11" Sturtz Mdl: RP3E/S5 Automatic Feed; S/N 21647
12" Pistorious Mdl: SC-12-PLH Cut-Off Saw w/ 10' CNC Feed
12" Sampson Mdl: SC-12 Cut-Off Saw w/ GF Tech CNC Feed
(3) Pistorious Mdl: DC-12P Dual Head Adjustable Mitre Saws from 5' to 8' Wide
(8) Sampson & Pistorious Mitre Notch Saws; Mostly 12", Some w/ DRO & 10' Manual Feeds, See Catalog for Mdl: & Serial
(8) Sampson & Pistorious Cut-Off Saws; Mostly 12", Some w/ Manual Gauges & DRO, See Catalog for Mdl: & Serial
Sampson Mdl: DC-10US Notch Saw Fixture Machine; S/N 041721
(3) Dewalt Table Saws & Mitre Saws by Dewalt & Others
FRAME ROUTERS
2006 Sturtz Mdl: TA-350/M Frame Router w/ Sturtz Mdl: RP3V Automatic Feed
(2) 2007 Sturtz Mdl: F102/S Frame Routers; S/N 25497 & N/A
Elumatec Sampson Mdl: AS-70 Frame Router; S/N 44-766 Kent Double End Frame Router; Approx. 60" Wide, Foot Pedal Control (Late)
Wegoma Mdl: KF-225 Router
GED INTEGRID ROLLFORMING LINE
GED 12-Stand Intergrid Rollforming Line; S/N 557, w/ GED Hot Melt Extruder; S/N 2628
GED Hydraulic Angle Punch Line; S/N 2626
CNC GRANITE POLISHING TABLE
2003 Intermac Mdl: Master Groove 1500T CNC Granite Polishing Machine; S/N 33365, 69" X 118" T-Slotted Table, CNC Control, Sludge Tanks, Light Curtains
WINDOW SHOP EQUIPMENT
(5) Kent Automation Aluminum Frame Assembly Tables from 5' to 15' Wide
(50) Multi & Single Station Pneumatic & Hydraulic Punches
(50) 5 Ton - 25 Ton Mechanical OBI Presses by Benchmaster,Rouselle & Others
(60) Glass Harp Carts to 100" Wide
7' Wide Kent Mdl: Genius Screen Punch; S/N TD-0109
4' Wide Kent Mdl: TD-0124 4'- Wide Frame Clamp
(3) Kent 4' Wide Traveling Head Fixtures
Kent Sureview Awning Machine
(2) Urban 72" X 144" Pneumatic Framing Tables
(2) 5' X 10' Pneumatic Frame Clamps
5' X 10' Kear Pneumatic Clamping Table
Window Assembly Stations Including: Pneumatic Screw Guns w/ Tables, Balancers & Related, DGI Automatic Fastening Screw Gun System, Kent / ARO Two-Head Assembly Station & Relate
SHOP & SUPPORT EQUIPMENT
(2) Kalamazoo Mdl: 939 Rotary Pallet Stretch Wrap Machines; 60" Dia. Table, 8' Approx. Max Height, PB Control
5,000 LB Pennsylvania 4' X 4' Digital Platform Scale
Selco Mdl: V5-HD Cardboard Baler; S/N 090167995
Large Quantity Shop Equipment Including: Racks, Carts, Fans, Tables, Benches, Hand Tools, Power Tools & Many Other Related Items
Toolroom Machinery Consisting of: Alliant & Grizzly Vertical Mills, Horizontal & Vertical Band Saws, 10" X 20" Grizzly Lathe, DoAll Mdl: 25150 Geared Drill, Misc. Maintenance Parts, Hardware, Electric, Pneumatic, Hydraulic Components
METAL FABRICATING EQUIPMENT
3C Mdl: CR-126HAZ Horizontal Angle Bending Pipe Roll
Artos Mdl: AE-68471 Rollformer
(50) Small OBI Presses 12' & 8' Wysong & 4' Niagara Mechanical Power Squaring Shears
Misc. Fabricating Machinery; 8' Verson Mechanical Power Press Brake, (5) Various Milford Rivetors, 6' Wysong Pneumatic Shear, 8' Hand Brake
GLASS EQUIPMENT
PTC Aculite Basic Traveling Bridge CNC Glass Cutting Table; S/N N/A, 92" X 15' L Cutting Table, 92" X 10' L Air Float Feed Table, 9' X 9' Air Float Feed Table, 12' Approx. Bridge Travel
84" Wide Bilco Mdl: 84"H/P Level IV Heated Roller Press; S/N W80023, Roll Press Section & (2) Dry-Off Sections, Infeed/Outfeed Conveyor, PB Control w/ DRO
80" Wide Bilco Like Pass-Thru Glass Washer w/ Blow-Off; Updated PB Controls, Tanks, Offload Conveyor, Stainless Tanks
84" Wide PTC Mdl: Cold Roll Glass Press; S/N 122804-01
(4) Bilco & Besten Air Float Glass Tilting & Rotating Tables
Fletcher 3000 60" x 60" Manual Cutting Glass Fixture
36" x 39" PTC Mdl: PTC-RST Pneumatic Tilting & Rotating Glass Table
(2) GED Pneumatic Sealant Pumps
Large Quantity Glass Equipment Including: Glass Roller Tables & Conveyors, Glass Harp Carts to 8' Wide, Tools & Related
WOODWORKING EQUIPMENT
1996 Komo Mdl: VR-508 CNC Router; S/N 1624396, Fanuc OM Control
52" W Timesavers Mdl: 352HDATB Two-Stage Wide Belt Sander; S/N 10859, 50 HP & Approx. 25 HP Motors
(2) Diehl Mdl: SL-52WA RIP Saws; S/N 77N3994-3304 & N/A, 54" Throat
Other Woodworking Equipment Consisting of: 25 HP Quincy Mdl: PSWE25E Vacuum Pump, Northfield Door Router, (4) Black Bros. Glue Presses, (6) Various Radial Arm Saws, Norfield Door Router
FIBERGLASS EQUIPMENT (Lines To Be Offered Separate & Overall)
2008 Kent Automation 18-Machine Slider Line Consisting of; 90 Degree Frame Saw, DH Header, DH Sill, DH Sill Punch, Slider Jambs Drilling, Slider Weep Center, Slider Head Punch, Slider Track, Jamb Pin Fab Center, Sill Pin Fab Center, Dispensing, Goop Drilling-DH Frame, Goop Drilling-DH/SL/Pin Frame, DH Jambs Balancer Router, Sash Lock Router, DH Jambs Installation Hose, DH Jambs Header End of Jamb, DH Jambs Sill End of Jamb, Frame 45 Degrees Sawing Line
2008 Kent Automation 4-Machine Double Hung Line Consisting of; Sash Fab Center, Goop Drilling-DH/SL Sash, Sash Weep/Roller Pocket Punch, Lock
Kent Automation 9-Machine Casement Line Consisting of; Goop Drilling CSMT/CSMT PW Frame, CSMT/Awning Frame Offend, CSMT Operator Router, CSMT/Awning Servo, Goop Drilling CSMT Sash, Glue Dispensing, Awning Top/Bottom Rail, CSMT/Awning Sash Offend, CSMT Sawing Line
6' X 10' Hi-Star Adhesive Applicator Glazing Table; 6' X 10' Table (Approx.), (1) Head, Hi- Melt Bulk Delivery System
Undefined Make ACT 12-Cartridge Dust Collection System; w/ Twin City 6,000 CFM Blower, S/N09-266973-2-1, Type BCS-SW
2005 Ingersoll Rand Mdl: SSRUP6-30-125-12 30 HP Tank Mounted Air Compressor; S/N PX6098U05333, w/ 120-Gallon Horizontal Tank
2013 Porter Cable Mdl: PCB220TS 10" Table Saw; S/N 121988
Kent Automation Glazing Bead Saw; S/N 4579 w/ Tiger Stop Guide
Pistorius Mdl: CR367 Corner Router; S/N 286183
RACK
(135) Sections 42"D X 8'W X 15' High Mecalux Teardrop Rack w/ Decking
Disassembled Rack w/ Approx. (20) Uprights & (100) Beams
Modular Extrusion Storage Racks
LIFT TRUCKS
5,000 LB Toyota Mdl: 7FGCU30 LP Gas Solid Tire Lift Truck; S/N 60596, 3-Stage Mast, Side Shift
4,000 LB TCM Mdl: FGC25-4HL LP Gas Sit-Down Lift Truck; S/N AA9M10064
AIR COMPRESSORS
2012 50 HP Kaeser Mdl: BSD-50T Air Compressor w/ Built-In Mdl: ABT-72 Dryer; S/N 1085, 236 CFM, 9127 Hours & 5514 Load Hours
2008 30 HP Kaeser Mdl: Sigma AS-30 Air Compressor; S/N 1314, 124 CFM, 15,722 Hours Showing
2004 20 HP Kaeser Mdl: AS-20T Air Compressor w/ Built-In Air Dryer; S/N 1007
Ingersoll Rand Mdl: UP6-30-125 Air Compressor; S/N PX6098U05333
VEHICLES
(3) 2009 International Durastar 26' Box Trucks; VIN #1HTMMAAL5AH162572, Miles: 121,505, VIN #1HTMMAAL3AH162571, Miles: 166,425, VIN #1HTMMAAL63AH167893, Electric Lift Gate, Automatic Transmission, Maxxforce DT Diesel Engine
2004 Ford F-750XL Super Duty 26' Box Truck; VIN #3FRXF75S0HV685004, Miles: 291,151, Seven-Speed Transmission, Diesel Engine
2006 Dodge Grand Caravan SXT Mini-Van; VIN #2D4GP44L76R909621, Miles: 171,994
2003 Ford E-250 Cargo Van; VIN #1FTNE24LT3HC04996, Miles: 257,183
OFFICE
Office Furniture, Phone System, Server System, PC's & Related
$2MM RAW MATERIAL, FINISHED GOODS & PARTS INVENTORY
(200) Stacking Racks w/ Full Length Vinyl Extrusions Approx. 200,000 Lbs.
Hardware & Components From Truth, Merchants, Quanex, Ultrafab, Ashland, 3M, Veka, Premium Laminations, Tencom, & More...
(25) Sections 42" X 8' X 15' Rack w/ Hardware, Clips, Weather Seal Stripping, Latches
(Lot) Inventory Including Windows, Patio Doors, Etc.
(30) Sections Rack w/ Inventory
In Conjunction With Maynards Industries & Cincinnati Industrial Auctioneers
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| ONSITE & INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS: IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!! Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via wire transfer (Please Note: All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing) or cashier's check. Blank company checks may be allowed on-site in place of a deposit only with valid driver's license and matching business card. Checks will be given back at the end of the sale if buyer is not a successful bidder. OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment. PLEASE NOTE: COMPANY CHECKS WILL NOT BE ACCEPTED FOR PAYMENT OF PURCHASES. DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for deposits accepted online: CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604 OR WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS. Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
| ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS. |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $45 outgoing wire fee applied to final payments only. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
| All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
Important Removal Notice
Time is of the essence with regards to the removal of the equipment from the premises.
All items must be removed by October 3rd at 4:00 pm.
Any items remaining after this time will be considered abandoned and will be scrapped.
