• All Items Loaded For Free
• Most Items Can Be Inspected
• All Items Specifications, Photos & Retail Asking Prices On Website At iamachinery.com
• Bid & Buy Well Under Retail At Auction
• Items Being Added Daily
• ITEMS AVAILABLE PRIOR TO AUCTION
Featuring Over 100 Name Brand Machines, Including: Rollformers • Cut-To Length Line • Press Brakes • Coil Straightening & Feed Equip • Shears • Drill Presses • Ironworkers • Compressor • Wheel Presses • Hydraulic Presses • Stright Side Presses • Fabricators • Tank Rolls Idlers & Drivers • Plate Rolls • Sheet Metal Rolls • Seamers • Slitting Line • Saws • Floor Sweeper • Tube Benders • & More
LARGEST AUCTION SALE OF THE YEAR OF FABRICATION & METALWORKING MACHINERY, BREAKING GROUND FOR NEW STATE OF THE ART BUILDING - OVER 100 MACHINES! METAL FABRICATION, CUT-TO-LENGTH LINES, SLITTING LINES, ROLL FORMING PANEL LINES, SHEARS, BRAKES, PRESSES & MORE...
• All Items Loaded For Free
• Most Items Can Be Inspected Under Power By Appointment
• All Items Specifications, Photos & Retail Asking Prices On Website At iamachinery.com
• Bid & Buy Well Under Retail At Auction
• Items Being Added Daily
• ITEMS AVAILABLE PRIOR TO AUCTION
ROLLFORMERS
• 1993 Tishken Geared Rollformer, 30 Stands x 30"- 40" RS x 3" Shaft, Mdl: 32-HW-AS-3, S/N: 21130 (Located In Huntington Park, CA) (7474)
• 1986 Tishken Geared Rollformer, 28 Stands x 40" RS x 3" Shaft, Mdl: 28-HW-3S, S/N: 19212- 1186 (Located In Huntington Park, CA) (7476)
• 1983 Tishken Geared Rollformer, 28 Stands x 40" RS x 3" Shaft, Mdl: 28-HW-3S, S/N: 18329 (Located In Huntington Park, CA) (7475)
• 2000 Tishken Geared Rollformer, 24 Stand x 18" RS x 2" Shaft, Mdl: 24-MW-2, S/N: 22368 (7484P)
• 2003 Tishken Geared Rollformer, 21 Stand x 22"- 36" RS x 2" Shaft, Mdl: 20HW-AS-3, S/N: 22751-403 (Located In Huntington Park, CA) (7575)
• Maplewood Duplex Rollformer, 19 Stands x 20"- 48" RS x 1 3/4" Shaft, S/N: 1607-PY-5-19 (5893P)
• 1994 Tru-Tech Rollformer (Geared), 18 Stands x 28" RS x 2.5" Shaft, Mdl: 18-28-2.5, S/N: 967-R (7297P)
• 1971 ASC Geared Rollforming Line, 18 Stands x 36" RS x 2 3/4" Shaft, Mdl: A.S Former, S/N: 227 (Located In Huntington Park, CA) (4696)
• 1972 Tishken Geared Rollformer, 16 Stands x 12" RS x 1 3/4" Shaft, Mdl: 16-HMW-1 3/4, S/N: 14685-473 (7845P)
• Bradbury Rollformer, 12 Stands x 48" RS x 3 1/2" Shaft, Mdl: 225- 3 1/2, S/N: 15666 (Located In Huntington Park, CA) (5213)
• Tishken Geared Rollformer, 12 Stands x 10" RS x 1 1/2" Shaft, Mdl: 12-HMW-11/2, S/N: 15150 A (Located In Huntington Park, CA) (4727)
• Yoder Roll Former, 6 Stands x 31" RS x 2" Shaft, Mdl: 2"-6 (7580P)
• Ardcor Geared Rollformer, 6 Stands x 5 1/2" RS x 1 1/2" Shaft, Mdl: 5-F, S/N: 522 (7539P)
• Ardcor Geared Rollformer, 6 Stands x 5 1/2" RS x 1 1/2" Shaft, Mdl: 5-F (7540P)
CUT-TO-LENGTH-LINE
• 1986 Rowe Littell Cut To Length Line, 16,000 Lb. x 40" x 0.050", Mdl: 16040-DSL/438-HVS-7PPL, S/N: 26056/79741-72 (Located In Huntington Park, CA) (7685A)
SLITTING LINES
• 1981 Dahlstrom Dual Head Loop Slitting Line, 60" x 40,000 Lb. (Located In Holland, OH) (6893)
WHEEL PRESSES
• Rogers Hydraulic Wheel Press 300 Ton x 204", Mdl: 300-DP (Located In Philadelphia, PA) (8251JVP)
• Caldwell Hydraulic Inclined Wheel Press, 300 Ton x 175", Mdl: #300-175 (Located In Huntington Park, CA) (8149HP)
• Rodgers Hydraulic Horizontal Wheel Press, 200 Ton x 144", Mdl: F200/4/D-1, S/N: F200-1097 (6630P)
• Rogers Hydraulic Wheel Press, 100 Ton x 120", Mdl: 2877 (8097P)
PRESS BRAKES
• Cincinnati Hydraulic Press Brake, 500 Ton x 20', Mdl: 500H, S/N: 37853 (8279P)
• Pacific Hydraulic Permanent Flanged Press Brake, 500 Ton x 14', Mdl: 500-14, S/N: 3384 (6940P)
• 1973 Pacific Hydraulic Press Brake, 500 Ton x 12', Mdl: K500-12, S/N: 5682 (7259P)
• 1995 Niagara CNC 2 Axis Hydraulic Press Brake, 350 Ton x 14', Mdl: HBM-350-12-14, S/N: P54223 (7864P)
• 1995 Pacific CNC 2 Axis Hydraulic Press Brake, 300 Ton x 20', Mdl: K300-20, S/N: 2788/RBA-1177 (7327P)
• 1980 Pacific Hydraulic Press Brake, 300 Ton x 14', Mdl: K300-14, S/N: 8911 (6779P)
• Chicago Hydraulic Press Brake, 300 Ton x 13' 6", Mdl: 300F10, S/N: H1447 (7260P)
STRAIGHT SIDE PRESSES
• Bliss High Speed Straight Side Press, 200 Ton x 57" x 36", Mdl: HP2-200-48-36, S/N: H61921 (4542P)
• 1977 Minster Straight Side Single Crank Press, 200 Ton, Mdl: S1-200-30-36, S/N: 23149 (7119P)
• 1995 Minster High Speed Production Press, 100 Ton x 48" x 31", Mdl: P2-100-48, S/N: 15159 (7949P)
• 1992 Niagara Straight Side Double Crank Press, 100 Ton x 36" x 36", Mdl: BP2-100-36-36, S/N: P53747 (7569P)
• 1992 Niagara Straight Side Double Crank Press, 00 Ton x 36" x 36", Mdl: BP2-100-36-36, S/N: P53746 (7570P)
• Heim Straight Side Double Crank Press, 40 Ton x 56" x 22", Mdl: S2-40, S/N: H-3668 (6932P)
HYDRAULIC PRESSES
• 1983 Pacific Hydraulic C Frame Press, 150 Ton x 38" x 24", Mdl: 150 PF II, S/N: 9219 (7862P)
• 1998 Sutherland Hydraulic Straight Side Press, 100 Ton x 47" x 39", Mdl: HD- 100, S/N: 23112 (Located In Huntington Park, CA) (5140)
• 1998 Sutherland Hydraulic Straight Side Press, 100 Ton x 47" x 39", Mdl: HD- 100, S/N: 23111 (Located In Huntington Park, CA) (5141)
• HTC Hydraulic C Frame Press, 75 Ton x 48" x 24", Mdl: 200 CF, S/N: 1072C031 (7838P)
• Hannafin Hydraulic C-Frame Straightening Press, 75 Ton x 84" x 12", Mdl: S-750, S/N: C-53970 (7087P)
• Dake 4 Post Hydraulic Press, 50 Ton x 58" x 38" (6754P)
• Denison Multipress Hydraulic C Frame Press, 50 Ton x 34" x 21", Mdl: FM-50 (7729P)
• Hannifin Hydraulic C Frame Press, 50 Ton x 20" x 18", Mdl: F-150-41X-SP, S/N: D-56063 (6662P)
• Dake Hydraulic Movable Frame Press, 50 Ton x 76" x 30", Mdl: 919279, S/N: 156591 (7173P)
• Abex-Denison Multipress Hydraulic C Frame Press, 35 Ton x 24" x 18", Mdl: FW2L-3515M, S/N: 27140 (7085P)
• 1996 Tox Air Press, 15 Ton, Mdl: CEB- 15, S/N: 669-94-304 (6513P)
PUNCH PRESSES
• 2011 EBU Burkhardt Gap Frame Eccentric Punch Press 125 Ton x 39" x 28", Mdl: H125F, S/N: P54701 (8265P)
• 2010 EBU Burkhardt Gap Frame Eccentric Punch Press 125 Ton x 39" x 28", Mdl: H125, S/N: P54689 (8266P)
• 2010 EBU Burkhardt Gap Frame Eccentric Punch Press 88 Ton x 30" x 24", Mdl: H80, S/N: P54685 (8267P)
• Minster OBI Punch Press, 75 Ton x 36" x 24", Mdl: #7, S/N: 22907 (6393P)
• Niagara OBI Punch Press, 75 Ton x 36" x 24", Mdl: E-75, S/N: 52488 (6767P)
• 1978 Bliss OBI Punch Press, 75 Ton x 36" x 24", Mdl: C-75, S/N: H67848 (8010P)
• Minster OBI Punch Press, 75 Ton x 36" x 24", Mdl: #7, S/N: SS-7-23841 (8083P)
• 1991 Minster OBS Gap Press, 60 Ton x 32" x 21", Mdl: 6SS-FB, S/N: 27662 (6412P)
• Federal OBI Punch Press, 60 Ton x 29 1/2" x 18 1/2", Mdl: F-5, S/N: 5-2243 (6397P)
• Federal OBI Punch Press, 46 Ton x 33" x 21", Mdl: #44, S/N: 44-469 (6719P)
• 1977 Bliss OBI Punch Press, 45 Ton x 29 1/2" x 19 1/2", Mdl: C-45, S/N: H68157 (6378P)
• 1988 Bliss OBI Punch Press, 45 Ton x 29 1/2" x 19 1/2", Mdl: C-45, S/N: H70622 (6413P)
• Bliss OBI Punch Press, 35 Ton x 26" x 17", Mdl: C-35, S/N: 67145 (5862P)
• Danly OBI Punch Press, 35 Ton x 24" x 15", Mdl: #35, S/N: 355-1950163 (6720P)
• Alva Allen OBI Punch Press, 30 Ton x 19" x 13", Mdl: 33A (6517P)
• L & J OBI Punch Press, 22 Ton x 21" x 12 1/2", Mdl: #3 (6816P)
• Perkins OBI Punch Press, 10 Ton x 10.5" x 8", Mdl: 10C, S/N: 43942 (7971P)
AIR RAM & CUT-OFF PRESSES
• 2008 Dominion Air Ram Cut-Off Press, 70 Ton x 94" x 38", Mdl: ATP70, S/N: 7041-ATP70-0204 (Located In Holland, OH) (5480)
• 1997 Yoder Open Throat Cut-Off Press, 25 Ton x 8" x 21 3/4", Mdl: P-25, S/N: Y8734-1597 (4194PA)
• 1992 TishkenCut Off Press, 15 Ton, Mdl: ACO-15, S/N: 20793-592 (Located In Huntington Park, CA) (7593)
• 1995 Tishken Cut Off Press, 10 Ton, Mdl: ACO-10-LP, S/N: 22753 (Located In Huntington Park, CA) (7633)
• Tishken Air Cut-Off Press, 15 Ton x 12" x 14", Mdl: ACO 15, S/N: 21349 (Located In Pontiac, MI) (4241C)
LATHES
• Leblond Heavy Duty Engine Lathe, 60" x 100", Mdl: #50, S/N: NR153 (7992P)
• Tuda Engine Lathe, 34"/48" x 84", Mdl: Jumbo Eight, S/N: 30012 (6563P)
• American Engine Lathe, 32" x 216", Mdl: Pacemaker, S/N: 50647 (Located In Philadelphia, PA) (8252JVP)
• Ajax Engine Lathe, 32"/42" x 96", Mdl: C13B, S/N: C13B-874200-3000 (6268P)
• Leblond Engine Lathe, 30" x 240" (20'), Mdl: #16, S/N: NE6487 (Located In Philadelphia, PA) (8250JVP)
• Mazak Hercules Ajax Metal Spraying Engine Lathe, 24" x 90", Mdl: #24 (7934PC)
• Monarch Engine Lathe, 24" x 72", Mdl: CM, S/N: 40899 (7935PC)
• 2007 Vectrax Engine Lathe, 16" x 60", Mdl: DY-410-1500, S/N: AY-A6-068 (6511P)
SHEARS
• Cincinnati Power Shear, 14 Ga. x 4', Mdl: 1004-R, S/N: 23992 (6889P)
• Cincinnati Power Shear, 14 Ga. x 4', Mdl: 1004.R, S/N: 23993 (6891P)
• 1987 Niagara Hydraulic Shear, 10 Ga. x 10', Mdl: IF-10, S/N: S65510 (6704P)
• 1988 Wysong Power Shear, 10 Ga. x 8', Mdl: 1096, S/N: P7-551 (7522P)
• Cincinnati Power Shear, 10 Ga. x 4', Mdl: 1004-R, S/N: 34974 (6625P)
• 1984 Amada Hydraulic Power Shear, 10 Ga. x 4', Mdl: S-1232, S/N: 12321431 (6995P)
• Lodge & Shipley Power Shear, 10 Ga. x 4', Mdl: 2CT48, S/N: 50655 (7258P)
• 1999 Accushear Hydraulic Power Shear, 1" x 12', Mdl: 8100012, S/N: 3183 (Locatd In Fort Worth, TX) (7227)
• 1993 Niagara Hydraulic Power Shear, 1/2" x 10', Mdl: 1F 10 .1/2 II, S/N: S65904 (6626P)
• Betenbender Hydraulic Power Shear, 1/2" x 6', Mdl: 6-500 (8080P)
• 1976 Cincinnati Power Shear, 3/8" x 10', Mdl: 2510, S/N: 40702 (7336P)
• Cincinnati Power Shear, 1/4" x 12', Mdl: 2CC12, S/N: 44341 (5991P)
• Cincinnati Power Shear, 1/4" x 12', Mdl: 1812, S/N: 36327 (8035P)
• Cincinnati Power Shear, 1/4" x 10', Mdl: 1810, S/N: 38920 (7223P)
• 1999 Wysong CNC Hydraulic Power Shear Power Front & Rear Gauging, 1/4" x 10', Mdl: H-2510, S/N: H2-281 (8129P)
• Lodge & Shipley Power Shear, 3/16" x 6', Mdl: 0306SL, S/N: 44768 (7238P)
CNC PUNCH
• Strippit LVD CNC Hydraulic Single End Punch, 40 Ton, Mdl: Super 750/40 SG, S/N: 145081800 (8078P)
CNC GUN DRILL
• 2007 TechniDrill Gun Drill, 1.5" x 54", Mdl: BTA-1.5-20-1A-PLO-54-P8, S/N: 7305-09/07 (7936PC)
TUBE BENDER
• Pines Horizontal Hydraulic Tube Bender, 1 1/2" x 0.188", Mdl: #1 (7119P)
PLATE BEVELER
• 2008 Cevisa Portable Beveler, 0.472" x 1.576", Mdl: CHP-12, S/N: 3698 (6888P)
BLAST CLEANING
• Pangborn Blast Cabinet, 48" x 24" x 24", Mdl: 53EN2, S/N: 6412 (6697P)
BOX & PAN BRAKE
• Roper Whitney Combination Hand Box & Pan Brake, 14 Ga. x 10', Mdl: 1014 (7966P)
COIL HANDLING EQUIPMENT
• Air Feeds Coil Reel & Traveling Coil Car, 20,000 Lbs. x 36", Mdl: R-200, S/N: 800820 (7592P)
• Rowe Coil Cradle & Straightener, 12,000 lbs. x 20" x 0.250", Mdl: C8-20/12J, S/N: 24279 (6890P)
• 1995 Minster Servo Feeder, 14" x 0.090", Mdl: MEF3-350S, S/N: 1850510 (7950P)
• Rowe Coil Straightener, 40" x 0.110", Mdl: C3-40, S/N: 23043 (6987P)
• Rowe Coil Straightener, 40" x 0.110", Mdl: C3-40, S/N: 19933 (6986P)
• Rowe Coil Straightener, 30" x 0.065", Mdl: B30, S/N: R29236ASTR (7865P)
• Littell Coil Straightener, 18" x 0.125", Mdl: 418-7PD, S/N: 86314-81 (7581P)
• Dallas Air Feeder With Pull Through Straightener, 12" x 0.125", Mdl: D250-12X6RH, S/N: 17574 (6394P)
• Littell Coil Straightener, 12" x 0.090", Mdl: 212-17PD, S/N: 81030 (6576P)
• 1992 Perfecto Straightener, 12" x 0.080", Mdl: 17-12-7, S/N: S2-92023 (7299P)
• Rowe Straightener, 10" x 0.105", Mdl: R-10, S/N: 23-421 (7326P)
• 1995 Minster Coil Straightener, 10" x 0.160", Mdl: MS20-10-7, S/N: 13-50244 (7948P)
TAP DISINTEGRATOR
• Electro Arc Tap Disintegrator, 15 KVA, Mdl: 25A, S/N: 14379 (6502P)
PORTABLE SEAMERS
• 2005 Roll Former Corp. Heavy Duty Portable Seamer, 24 Ga., Mdl: T-CAO Seamer, S/N: 2058 (7051P)
• Roll Former Corp. Heavy Duty Portable Seamer, 24 Ga., Mdl: SSX Dual Seamer, S/N: 2064 (7052P)
EMBOSSER
• Memco Embossing Machine (Two Roll), 30", Mdl: 100 (Located In Holland, MI) (5198)
DRILL PRESSES
• Ibarmia 6-Spindle Gang Drill, 27", Mdl: A- 32 & B-32, S/N: 660-F-1 Thru 6 (6574P)
• Natco Holesteel Multiple Spindle Drill, 24 Spindle Drivers - 8 Spindles, Mdl: G210, S/N: G210-149 (6963P)
• 24" Allen Multi 3 Head Drill Bank, Mdl: #2 (8136P)
• Carlton Traveling Base Radial Arm Drill, 7' x 19", Mdl: 4A (7097P)
• Carlton Radial Arm Drill, 7' x 17", Mdl: 4A (7045P)
• Carlton Radial Arm Drill, 6' x 19", Mdl: 4A, S/N: 4A4394 (7080P)
• Pontiac Portable Boring Mill-Drill, 6" Spindle Diam. (7244P)
• Carlton Radial Arm Drill, 5' x 11", Mdl: 1A, S/N: 1254 (6596P)
• Carlton Radial Arm Drill, 5' x 11", Mdl: 1A (7076P)
• Carlton Radial Arm Drill, 4' x 11", Mdl: 1A, S/N: 1A-3845 (6663P)
• Carlton Radial Arm Drill, 4' x 9", Mdl: OA (7071P)
• Carlton Radial Arm Drill, 4' x 9", Mdl: 1A (7077P)
• Cincinnati Bickford Radial Arm Drill, 3' x 9", Mdl: 1R, S/N: 1R-1821 (6966P)
LEVELER
• 1979 Littell Leveler/Straightener, 48" x 0.035, Mdl: 452D-16 PDS, S/N: 84154-79 (Located In Huntington Park, CA) (7721HP)
BULLDOZER PRESS
• 1981 Greenerd Hydraulic Horizontal Bulldozer, 40 Ton x 26" x 15", Mdl: HC-HOR-40PV010, S/N: 81T3930 (7991P)
TANK TURNING ROLLS
• Ransome Driver Power Tank Roll, 800 Ton, Mdl: 800T, S/N: 668950 (7371P)
• Ransome Driver Power Tank Roll, 800 Ton, Mdl: 800T, S/N: 668951 (7372P)
• Aronson Driver & Idler Power Tank Roll Set, 600 Ton, Mdl: WSD600 & WSI600 (7365P)
• Aronson Idler Tank Roll, 400 Ton, Mdl: WSI400, S/N: 7549 (7382P)
• Aronson Idler Tank Roll, 120 Ton, Mdl: WSI120-BW, S/N: 7360 (7383P)
• Aronson Idler Tank Roll, 120 Ton, Mdl: WSI120-BW, S/N: 7367 (7384P)
• Aronson Driver & Idler Power Tank Roll Set, 60 Ton, Mdl: WSD60 & WSI60, S/N: 6922 & 7035 (7366P)
• Pandjiris Driver & Idler Power Tank Roll Set, 60 Ton, Mdl: PR-120 & IR-60S (7370P)
SHEET METAL ROLL
• Webb Initial Pinch Power Roll, 10 Ga. x 10', Mdl: R3L, S/N: 5236 (7331P)
ANGLE BENDING ROLLS
• Herkules Hydraulic Angle Roll, 2 1/2" x 2 1/2" x 1/4", Mdl: 80239N, S/N: 74075 (6469P)
PLATE ROLLS
• Bertsch Intitial Pinch Plate Roll, 2" x 10', Mdl: #24, S/N: M-9267 (Located In New Iberia, LA) (6659)
• 1994 Bertsch 4 Roll Hydraulic Plate Roll, 5/8" x 14', Mdl: 75-14, S/N: M-10819 (7996P)
• Webb Initial Pinch Power Roll, 5/8" x 4', Mdl: 6L, S/N: 53122 (7262P)
• Pullmax SMT Kumla Hydraulic Plate Roll, 5/8" x 10', Mdl: PV7H/911 (7261P)
• 1975 Webb Initial Pinch Power Roll, 1/2" x 12', Mdl: 9L-1312 L.H., S/N: 75105 (7240P)
• Montgomery Hydraulic Double Pinch Power Roll, 3/8" x 8', Mdl: RS8-10, S/N: 093053 (7890P)
• Bertsch Initial Pinch Power Roll, 1/4" x 15', Mdl: #11, S/N: 6855 (5986P)
• Bertsch Initial Pinch Power Roll, 3/16" x 12', Mdl: #7, S/N: 395-02 (6471P)
SAWS
• 1999 HEM Automatic Horizontal Bandsaw (Wide Flange), 18" x 27", Mdl: WF-130 HA- DC, S/N: 700499 (6978P)
• 2008 HEM Cyclone Horizontal Bandsaw (Swivel Head), 16" x 22", Mdl: Cyclone M (6354P)
• 1996 HEM Automatic Horizontal Bandsaw, 14" x 16", Mdl: H105A, S/N: 515396 (6355P)
• Wellsaw Horizontal Bandsaw, 12" x 18", Mdl: 1118 (6877P)
• 2005 Peerless Automatic Horizontal BandSaw, 12" x 13.4", Mdl: HB1212NC, S/N: C941269 (6573P)
• 2001 Hyd-Mech Horizontal Bandsaw (Double Miter), 7.75" x 10.5", Mdl: DM- 8, S/N: 10127-B7-02 (6352P)
• Startrite Horizontal Bandsaw, 10" x 16", Mdl: H225W, S/N: 94676 (6815P)
COLD SAWS
• Omes Promacut Semi-Automatic Cold Saw, 14", Mdl: Tramatic 370A (7050P)
• Everett Chop Saw, 10", Mdl: 100022 (6501P)
SWEEPER
• Advance Tiger Cat Sweeper, 60", Mdl: 462001 Tiger Cat, S/N: 465532 (7426P)
PIPE & BOLT THREADERS
• William Pipe & Bolt Threading Machine, 6", Mdl: HP, S/N: 5-5723-27 (6570P)
• Hill Acme Dual Head Lead Screw Threader, 1/2"- 2", Mdl: XLA, S/N: M17156 (6353P)
• Landis Lead Screw Threading Machine, 1/8"- 1 1/2", Mdl: 12 CL1B, 12CL1B- 66X (6631P)
• Oster Williams Pipe & Bolt Threader, 8", Mdl: 8R (Located In Huntington Park, CA) (8077)
AIR COMPRESSOR
• Sullair Rotary Screw Air Compressor, 110 CFM x 100 PSI, Mdl: 25-100L, S/N: 31327AGG (6533P)
In Conjunction With Maynards Industries
INSTRUCTIONS TO BID |
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
ONSITE & INTERNET BIDDERS |
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for online deposits: 1. CASHIER'S CHECK made out to Biditup Auctions Worldwide and delivered to our office prior to the sale 2301 Belgrave Ave, Huntington Park, CA 90255 2. WIRE TRANSFER . Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We do not accept company checks or credit cards, NO EXCEPTIONS. |
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS. |
PROXY BIDDERS |
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected] |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
Auctioneer must approve all payment methods prior to bidding.
Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.