MOST ALL EQUIPMENT NEW IN 2011 & SOME NEW IN BOX!
(2011) Okamoto Shaping, Polishing & Slabbing Machines • Sondex Heat Exchanges With Bray Control Values • (2011) 1000KW Caterpillar Diesel Generator • Gorbel Crane Systems • (2) Kayex 150 Mono-Crystalline Batch Pullers • 36" Tannewitz Mdl: G1NE Band Saw • Meyer Burger Mdl: BS 805/2 Band Saw • (1996) 8" MRL 1624 2-Stack Large Bore Diffusion Furnace • Nespi Power Factor Harmonic Banks • (20) 150KW Warner Power DC Power Supplies w/ SCR Controllers • Forklifts • Scissor Lifts • Boom Lift • Misc Copper & Wiring Throughout Plant • Motors & Controls-Switch Gear, Starters • Transformers • Valves • Instruments • Evapco Cooling Towers • Motors Up To 200 HP • AC Units • Vacuum Bag House • & Much More
GT ADVANCED CZ LLC: POLYSILICON R & D WAFER MANUFACTURING FACILITY
MOST ALL EQUIPMENT NEW IN 2011 & SOME NEW IN BOX!
GENERATOR
(2011) Caterpillar Diesel Generator, Engine Mdl: C32, 1250 KVA, 1000KW, S/N G1G05236, 73 Hours w/ Enclosure, 252" O.A.L. x 108" O.A.W. x 114 I.H. & 2100 Gallon Tank In Base
CRYSTAL PULLERS
(2) Kayex 150 Mono-Crystalline Batch Pullers, Complete With Control System, Vacuum Pump, Filters, Power Supply & Platform (No Hot Zone Components)
GRINDERS
(2011) Okomoto High Precision PV Ingot Grinding Machine: Process Capability: Ingot Diameter: 150 – 220 mm; Ingot Length: 150 To 500 mm; Ingot Width: 125 And 156 mm; Loading System: Number Of Stocker: 3; Max Ingot Size: 220x500 mm; Handler Horizontal Stroke: Max. 1000 mm; Handler Vertical Stroke: Max. 300 mm; Handler Horizontal Speed: Max. 20000 mm/Min; Handler Vertical Speed: Max. 6000 mm/Min; Coarse Grinding Spindle - Used For Surface & Radius Pre-Grinding: Number Of Spindle: 2; Outer Dia. Of The Grinding Wheel: 250 mm; Spindle Rotation Speed: Max. 4,000 Min-1; Spindle Travel Horizontal: Max. 100 mm; Spindle Travel Vertical: Max. 110 mm; Spindle Feed Rate Horizontal: Max. 6,000 mm/Min; Spindle Feed Rate Vertical: Max. 500 mm/Min; Fine Grinding Spindle - Used For Surface & Radius Finish-Grinding: Number Of Spindle: 2; Outer Dia. Of The Blade: 250 mm; Spindle Rotation Speed: Max. 4,000 Min-1; Spindle Travel Horizontal: Max. 100 mm; Spindle Travel Vertical: Max. 110 mm; Spindle Feed Rate Horizontal: Max. 6,000 mm/Min; Spindle Feed Rate Vertical: Max. 500 mm/Min - Click Here For Complete Specifications
(2011) Okomoto High Precision PV Ingot Squaring Machine: Process Capability: Ingot Diameter: 150 – 230 mm; Ingot Length: 150 To 500 mm; Ingot Width: 125 And 156 mm; Loading System: Number Of Stocker: 3; Max Ingot Size: 230x500 mm; Handler Horizontal Stroke: Max. 1000 mm; Handler Vertical Stroke: Max. 300 mm; Handler Horizontal Speed: Max. 20000 mm/Min; Handler Vertical Speed: Max. 6000 mm/Min; Squaring Spindle - High Precision Spindle Unit For Ultra-Fast Cutting Process Without Loss Of Accuracy: Number Of Spindle: 2; Outer Diameter Of The Blade: 550 mm; Spindle Rotation Speed: Max. 1800 Min-1; Spindle Motor: 9 KW; - Click Here For Complete Specifications
BANDSAWS
36" Tannewitz Mdl: G1NE Band Saw: Size (Wheel Diameter): 36", Under Guide Capacity: 16", Throat Capacity: 35-1/2", Base Construction: Weldment, Band Width Capacity: Up to 2", Band Length: 20 Feet - 0",Band Speed: 2800 – 6000 FPM, Wheel Type: Heavy Duty Balanced Steel Disk, Tires (Replacement): Rubber Speedi-Change, Upper Wheel Adjustment: 5", Brakes: Automatic Electric 2 Wheel, Hydraulic Adjustable Guide Post: Table Size: 32" X 41" Hydraulic Powered w/16 Inch Travel w/uhmw Wear Strips and Stops, Ban Tension: Hydraulic to Handle 550 PSI, Guides: Stainless Steel Tannewitz (R0419AS), Motor: 10 HP, TEFC, Drive: Belt Driven System, Electrics: To NFPA 79 Standard 440/3/60-50, Sump Coolant Pump: In Base of Machine - Located in Merrimack, NH
Meyer Burger Mdl: BS 805/2 Band Saw: Length Of Sawing Band: 8910 mm; Multi Bricking: Max. Workpiece Dimensions [mm] - 890 x 890 x 740; Workpiece Weight [Kg] - Max. 1000; Clamping - Foaming/Vacuum; Multi Cropping: Max. Workpiece Dimensions [mm] - 125/156; Workpiece Weight [Kg] - Max. 1000; Clamping – Mechanical; Mono Squaring: Max. Workpiece Dimensions [mm] - Max. Height 650; Workpiece; Diameter [mm] - Max. 320; Workpiece Weight [Kg] - Max. 1000; Clamping – Gluing; Mono Cropping: Max. Workpiece Dimensions [mm] - Max. Length 2500; Workpiece Diameter [mm] - Max. 320; Workpiece Weight [Kg] - Max. 400; Clamping – Mechanical. Located in Merrimack, NH - Click Here For Complete Specifications
FURANCE
(1996) 8" MRL 1624 2-Stack Large Bore Diffusion Furnace: Wafer size: 8", Quartz Diffusion Tubes: 10.5" ID, Upper tube: Black Max Element: 200°C to 1200°C, S/N 400-929042 Configured For High Temperature Oxidation Lower tube: Aztec Helix Element: 400°C to 1300°C, S/N 044-9319815 Cr-Al-Fe Wire For Continuous High Temperature Cycles Above 1150°C; Dual Argus Gas Control Modules; MFC Configuration: Upper Tube UNIT MFCs: 4; 0 to 1 SLM O2; 0 to 10 SLM O2; 0 to 30 SLM 10% H2/N2; 0 to 30 SLM N2; Lower Tube UNIT MFCs: 2 - 0 to 30 SLM N2; 0 to 30 SLM 10% H2/N2
HEAT EXCHANGERS
(3) (2011) Sondex Heat Exchangers, Mdl: S100, Test Pressure 195 PSI, 200 Deg, 150 PSI, Area 4,854.52 sqft, S/N's 13768, 13767, 13769 w/ Associated Valves & Pipe
DUST COLLLECTOR
Camfil/Farr Dust Collector System w/ Smoot Filter & Controls
COOLING TOWER
Evapco Cooling Tower w/ Structure
PUMPS
(2) Armstrong Pumps, Mdl: 12x12x17 43TCZ, 4200 GPM, 200Hp 1200 RPM
AMT Submersible Pump (New), Mdl: 5780-98, 1/2 HP, 3450 RPM, Single Phase
AIR COMPRESSORS
(2) Kobelco Air Compressors KNW Series Mdl: KNWAOO- CH, 40 Hp S/N 11K6113638 Ingersoll Rand Air Compressor, Mdl: UP6-5-125, S/N UQ3109U10265, w/ Dryer
FILTRATION SYSTEM
Lakos Filtration System, Mdl: TCX- 0525-ABV/PE
AIR CONDITIONERS
(4) Trane Air Conditioners Mdl: GEVE06041E01AOTL0010000
(3) Friedrich Air Conditioners
TRANSFORMERS
7500 KVA 3 Phase Pad Mounted Transformer
3000 KVA 3 phase Pad Mounted Transformer
2000 KVA 3 Phase Pad Mounted Transformer
(2) Siemens 75 KVA Transformers, 480 primary, 280Y/120V Secondary
Square D 30 KVA Transformer NVA 480, LV 208Y/120
ELECTRICAL
(2) (2011) Siemens Main Breaker Panel
(2) (2011) Nepsi 480 Harmonic Filter Bank
(2) (2011) Siemens 4 Section Switch Board
(2) (2011) Siemens 5 Section Switch Board
(2011) Emerson ASCO Power Transfer Switch
(2011) Siemens 2 Section Switch Board
(2011) Siemens Main Breaker Panel
(3) (2011) Siemens Panel Board Type P3
(2011) Siemens Panel Board Type P1
GE Evolution Series E900 MCC, 2 Sections, 9 Buckets, 600 Amp
Siemens 7 Section MCC Tiastar
Siemens 5 Section MCC Tiastar
(2) (2011) Siemens Tiastar 3 Sec. MCC's, 12 Buckets
Siemens Tristar MCC
(18) 150KW SCR Controlled DC Power Supply
(40) Siemens Heavy Duty Safety Switches, 30A, 600 VAC, 250 VDC
(4) 100 Amp Safety Switches - 2 Siemens & 2 GE
(5) 60 Amp Safety Switches - 4 GE & 1 Square D
(6) GE 30 Amp Safety Switches
(2) HICZ Inverter Panels
& Much More
ROLLING STOCK
Cat Forklift, Mdl: P6000-LP, S/N AT13F11356, 3-Stage, 171 Hgt, Solid Tire, Lp, Side Shift, 60" x 5" Forks, 3700Hrs
Crown Order Picker, Mdl: RD3040-30-S, S/N 1A133117, Extending Forks, Side Shift, 42" x 4" Forks w/ Hobart Accu-Charger
JGL Man Lift, Mdl: 40-Electric, S/N 03000 56220, Approx. 1600Hrs (Needs New Front Drive Motor)
Genie GS-262 Scissor Lift, Electric, Approx. 500Hrs
Yale Walk Behind Pallet Lift, Electric, Mdl: MSN030SCN12TV092, S/N B820N02671W, 12 Volt, Side Shift, 42" x 4" Forks
Jungheinrich Electric Walk Behind Pallet Lift, Mdl: EJE120, 45" x 7" Forks
Big Joe Electric Walk Behind Pallet Lift, Mdl: PD1-2024-P6, S/N: 4413093, 2000# Cap, 72" Lift Hgt
(3) Central Hydraulic Scissor Table Carts, 1000# Cap, 11" - 34 1/2" Hgt, 32" x 19" Table (Tops Added For Use As Roller Conveyor)
CE 6600# Pallet Jack, 21" Wide, 48" x 6" Forks
TUV 5500# Cap Pallet Jack, 27" Wide, 48" x 6" Forks
CRANES
Jet Hydraulic Shop Crane, Mdl: JHC-200X, 4000# Cap
Central Machinery Gantry Crane, Mdl: 66273 w/ Chicago Electric 1100# Cap Electric Hoist, Single Phase
Gorbel Free Standing Crane System, 1000# Cap w/ Harrington 1/2 Electric Hoist, Single Phase, 35' x 25'
2-Ton Chainfall w/ Trolly + Beam
VACUUM & BLOWER SYSTEMS
(2) Tuthill Vacuum & Blower Systems, Mdl: KT500
MISC
(20+) Control Cabinets; Craftsman Rolling Tool Box; (7) Husky Rolling Tool Boxes; Milwaukee Sander, Mdl: 9096; Craftsman 5/8" Scroller Saw; Black & Decker Scroller Saw; Mettler Toledo AL-104 Scale w/ Granite Table; Doran & A & D Scales; Hytrol Roller Conveyor; Cotterman & Ballymore Rolling Stairs, (8) Werners Double Side Step Ladders; Flame Cabinets; & Much More
In Conjunction With Maynards Industries & Heritage Global Partners.
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a MANDATORY CASH, CASHIER'S CHECK, AS PAYMENT OR WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID ONCE YOUR MAXIMUM IS REACHED. |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $30 outgoing wire fee applied ($45 International). |
| ONLINE ONLY SALE |
|
PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $30 outgoing wire fee applied ($45 International). |
* All Items Subject to Seller's Acceptance of Online Bids *
**DEPOSITS AND PAYMENTS NOT ACCEPTED ON-SITE***
BUYER'S PREMIUM
ONLINE: 18%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
