Global Webcast Auction

NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF GOODMAN MANUFACTURING COMPANY, L.P., FEATURING: LATE MODEL BURR OAK SINGLE & DOUBLE EXPANDERS, BURR OAK PIN BENDERS, SUTHERLAND, KYORI HIDAKA, KOMATSU, FEDERAL, VERSON PACIFIC, ROUSSELLE, ADVANCE & CLEARING PRESSES, TUBE PIPE & BAR BENDERS, TUBE CUT-OFF MACHINES, TUBE END FINISHERS, INDUCTION HEATING EQUIPMENT, CRANES & MORE...

Auction Info

(10) Late Model Burr Oak Single & Double Expanders • (2) Burr Oak Vertical Pin Benders • 2003 250-Ton Sutherland Press • 110-Ton Kyori Hidaka Fin Press • (2) Clearing Presses • 10,000 X 42" Feedlease Coil Reel • SSDC, OBI, Straightening & More Presses • Bevelers • Tube Pipe & Bar Benders • Tube Cut-Off Machines • Tube End Finishers • Swaging Machine • Induction Heating Equipment • Cut-Off Machines • Cranes • Beader Crimping Machine • & More...


Terms & Conditions

Auction Dates

Starts
Wednesday, March 7, 2018 - 10:00am (CDT)

Auction Type

Global Webcast Auction

Location

1502 Greengrass Dr, Houston, TX 77008

Description

NO LONGER REQUIRED IN THE CONTINUING OPERATIONS OF GOODMAN MANUFACTURING COMPANY, L.P., FEATURING: LATE MODEL BURR OAK SINGLE & DOUBLE EXPANDERS, BURR OAK PIN BENDERS, SUTHERLAND, KYORI HIDAKA, KOMATSU, FEDERAL, VERSON PACIFIC, ROUSSELLE, ADVANCE & CLEARING PRESSES, TUBE PIPE & BAR BENDERS, TUBE CUT-OFF MACHINES, TUBE END FINISHERS, INDUCTION HEATING EQUIPMENT, CRANES & MORE...

Featuring

EXPANDERS
• 2010 Burr Oak Double Expander, 7MM Expander, S/N CSE-501-1-12082-2010
• 2009 Burr Oak Double Expander, S/N DEM312-2-31787-11513-2009 & DEM312-2-31787-11514-2009
• 2008 Burr Oak Double Expander, S/N DEM312-2-31787-11618-2008 & DEM312-2-31787-11617-2008, Advised 3/8 Capacity
• 2008 Burr Oak Double Expander, S/N DEM312-2-31787-11668-2008 & DEM312-2-31787-11669-2008, Advised 3/8 Capacity
• 2008 Burr Oak Double Expander, S/N DEM312-2-31787-11512-2008 & DEM312-2-31787-11151-2008, Can Be Used As 3/8 Or 7/8
• 2008 Burr Oak Double Expander, S/N DEM312-2-31787-11515-2008 & DEM312-2-31787-11516-2008
• 2008 Burr Oak Double Expander, S/N DEM312-2-31787-11670-2009 & DEM312-2-31787-11671-2009, 3/8" Cap
• Burr Oak Double Expander, 7MM Expander, Model CDEM41G-11494-6
• Burr Oak Double Expander, 7MM Expander, CSE-M459-08095, 5mm (.197") - 16mm (.630") X 13.86mm (.5456"), Staggered (2) Rows, (57/56) Holes Per Row, (113) Holes Total
• 2010 Burr Oak Single Expander CSE-590-3, S/N CSE-M590-950-110304-3-12097-2010, CSE-590-3, S/N CSE-M590-950-110304-3-12097-2010, 3/8 - 1.000" X .866" Staggered, (4) Rows, (49/50) Holes Per Row, (198) Holes Total

PIN BENDERS
• (2) Burr Oak Vertical Hair Pin Bender, 5MM Cap, S/N VBH-M810-20LH & VBH-M810-14RH

PRESSES
• 2003 250-Ton Sutherland Model: FDP-250, 250 Ton Press, 120" X 72", 10" Adj, 12" St, 20-40 Spm, 24" Sh, S/N 7250012, Rebuilt Clutch Recently
• 2006 Hidaka Fin Press, Model: FIX-100, S/N: 129046, Capacity: 100 tons (1000 kN), SPM: 150-300, Stroke Length: 1.58” (40 mm), Die Height: 11.82” (300 mm), Adjustment: 1.97” (50 mm), Bolster: 55.16” x 86.68” (1400 x 2200 mm), Feed level Max: 5.9” (150mm) / Min 5.1” (130mm), Material Width: 43.34” (1100 mm)
• (2) Clearing S2-250-108-54 Presses, 10" St, 30" Sh, 12" Adj, 20-40 Spm, S/N's: 51-1581 & 51-1582

COIL REEL
• 10,000 X 42" Feedlease Coil Reel

OFF LEASE MACHINES BY ORDER OF LESSOR
Inspection Location: 2301 Belgrave Avenue, Huntington Park, CA 90255
FOR MORE INFORMATION CALL: 323.587.1887

STRAIGHT SIDE DOUBLE CRANK PRESSES
• 2000 220-Ton Komatsu Straight Side Double Crank Press, Mdl. E2G200-38 M
• 200-Ton Federal Straight Side Double Crank Press, Mdl. S2-200F
• 150-Ton Verson Straight Side Double Crank Press, Mdl. 150-B2-96
• 125-Ton Verson Straight Side Double Crank Press, Mdl. 566

HYDRAULIC STRAIGHT SIDE PRESSES
• 1983 570-Ton Advanced Hydraulic Straight Side Press, Mdl. 570-2230
• 1995 200-Ton Pacific Down Acting Hydraulic Press, Mdl. 200-D8-48-96
• (2) 1998 100-Ton Sutherland Hydraulic Straight Side Presses, Mdl. HD-100

HIGH-SPEED STRAIGHT SIDE PRESS
• 100-Ton Federal High-Speed Straight Side Press, Mdl. S2- 100- 60- 36

OBI PRESSES
• 1998 95-Ton Rousselle OBI Punch Press, Mdl. G1-95
• 1998 95-Ton Rousselle OBI Punch Press, Mdl. G1-95-14

HYDRAULIC 4-POST PRESSES
• 1981 800-Ton Modern Hydraulic 4 Post Press, Mdl. 1R
• 110-Ton Waterbury-Farrel Hydraulic Press, Mdl. 70S
• 1988 50-Ton Neff 4 Post Hydraulic Press, Mdl. H 50

HYDRAULIC C FRAME PRESSES
• 125-Ton Greenerd Hydraulic C-Frame Press, Mdl. 4-125-50L17
• 50-Ton Denison Multipress Hydraulic C-Frame Press, Mdl. FN 50
• 50-Ton Denison Multipress Hydraulic C-Frame Press, Mdl. FW-50

GAP SINGLE CRANK PRESS
• 2000 45-Ton Komatsu OBS Gap Press, Mdl. OBS-45H-VS-3

STRAIGHTENING PRESS
• 75-Ton Hannafin Hydraulic C-Frame Straightening Press, Mdl. S-750

BEVELERS
• 2-1/2" Pullmax Beveling Machine, Mdl. X- 6
• 2008 1-1/2" Cevisa Portable Beveler, Mdl. CHP-12

TUBE PIPE & BAR BENDERS
• 100-Ton Bull Horizontal Universal Adjustable Bar, Pipe, Tube Bender
• 1983 4-1/2" Conrac Horizontal Hydraulic Tube Bender, Mdl. Digicon 255-SX
• (5) 1-1/2" Pines Horizontal Hydraulic Tube Benders
• 1-1/2" Clarke & Lewis Tube Bender, Mdl. CL-150H
• 1-1/2" Eaton Leonard CNC Tube Bender, Mdl. VB150-C-HS
• (2) 1-1/4" Pines Vertical Hydraulic Tube Benders

TUBE CUT-OFF MACHINES
• 2" Modern Tube Cut-Off Machine, Mdl. 2A
• 1-3/4" Bertolette Tube Cut-Off Machine, Mdl. 315

TUBE END FINISHERS
• 3-1/2" Vail Hydraulic Tube End Former, Mdl. 7
• 3" Vail Hydraulic Tube End Former, Mdl. 7-001-H

SWAGING MACHINE
• (3) 1-1/2" Abbey ETNA 2 Die Swaging Machines, Mdl. 1512

FLANGING MACHINE
• 1989 10 Ga. X 0"- 110" Atlanta Grotness Barrel Flanging & Beading Machine

INDUCTION HEATING EQUIPMENT
• 2000 50 KW Pillar Induction Heat Treat System, Mdl. AB7109- 503
• 1990 25 KW Ajax Magnethermic Pachydyne Annealer, Mdl. LPS3-10-25
• 25 KW Lepel Induction Heater, Mdl. LSP12-25-30

PUNCHES
• 30-Ton Whitney Hydraulic Single Station Punch Fabricator, Mdl. 635A
• 30-Ton Strippit Hydraulic Single End Fabricator, Mdl. Super 30/30
• 20-Ton W.A. Whitney Portable Hydraulic Punch, Mdl. 700548

EXPANDER
• 2-1/2" Grotness Pneumatic Tube Expander, Mdl. C-4580-A

CUT-OFF MACHINES
• 3" Modern Auto Feed Cutoff, Mdl. #3K
• 19951-1/8" Burr Oak Tool Rotary Tube Cut Off Machine, Mdl. STHF-M5

HEAT EXCHANGERS
• 2005 150 PSI Tranter/Dover Heat Exchanger, Mdl. GCP-060-M-5-UP-114
• 150 PSI Thermal Transfer Heat Exchanger, Mdl. RM-IN

CRANES
•2003 2,500 Lb. Acco Wright Electric Crane Hoist, Mdl. X1WD2
• 1,500 Lb. Acco Wright Electric Crane Hoist, Mdl. X1W02
• 40-Ton Drott Straddle Mobile Gantry Crane, Mdl. M7901-800AC
• (2) 40-Ton Drott Mi-Jack Straddle Mobile Gantry Cranes, Mdl. Travelift 800
• 2003 2-Ton Yale Electric Crane Hoist, Mdl. LG2D22630/10
• 2-Ton C&M Electric Crane Hoist
• 1-Ton Yale Electric Crane Hoist, Mdl. 1E20L16RPE1
• 1-Ton Yale Electric Crane Hoist, Mdl. 1E20L12MPW2

BEADER CRIMPING MACHINE
• (2) 24 Ga. Power Beading & Crimping Machines

SANDER
• 6" X 240" Horizontal Belt Sander

AIR COMPRESSORS/DRYERS
• 2,500 CFM IR Centac II Centrifugal Air Compressor, Mdl. Centac-II/ 26 M2
• 2000 1,350 CFM Leroi Compair Rotary Screw Air Compressor, Mdl. W2M300SSA
• 110 CFM Sullair Rotary Screw Air Compressor, Mdl. 25-100L
• 80 CFM Arrow Pneumatics Refrigerated Air Dryer, Mdl. 3531-1

SAWS
• 36" Tannewitz Vertical Bandsaw, Mdl. 3600 MH
• 36" DoAll Vertical Bandsaw, Mdl. V-36
• 16" X 27" Behringer Semi-Auto Horizontal Bandsaw, (Twin Post), Mdl. HPB-420
• 26" Everett Oscillating Head Abrasive Saw
• 23" Tannewitz Vertical Bandsaw, Mdl. DI-Saw
• 20" Savage/Campbell Abrasive Saw, Mdl. 2B-81
• 15" Dayton Vertical Band Saw, (Wood Or Plastics), Mdl. 21UN02
• 10" Everett Chop Saw, Mdl. 100022
• 12" Delta Abrasive Chop Saw
• 1988 6" x 12' Metl-Saw Plate Saw, (Steel), Mdl. NFS-1204-T6/4

In Conjunction With Maynards Industries

Registration Info

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
ONSITE & INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS:
IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!!
Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. Example: $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via:

1. Cash

2. Wire Transfer: Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing. Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]

3. Cashier's Check: Made out to Biditup Auctions Worldwide.

4. Blank Company/Corporate Checks: For deposit only with valid driver's license, matching business card & BANK LETTER OF GUARANTEE. Checks will be given back at the end of the sale if buyer is not a successful bidder OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment.

DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS:
Minimum: $2,500 required which allows a spending limit of $10,000.
If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent)

Example: $5,000 deposit = allows up to $20,000

You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above.

Forms of payment for online deposits:

1. CASHIER'S CHECK made out to Biditup Auctions Worldwide and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604

2. WIRE TRANSFER .  Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected].

We do not accept company checks or credit cards, NO EXCEPTIONS.
 
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU
ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID
ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE with a $2,500 MINIMUM DEPOSIT in order to be approved to bid.
Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]

Payment Info

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%

***Please fax or email resale certificates to Biditup Auctions (818.508.3025), [email protected] prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer

Auctioneer must approve all payment methods prior to bidding.

Removal Info

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.