Global Online Auction

FORMER PIERRE FOODS FACILITY

Auction Dates:
Starts: Wednesday, February 23, 2011 - 9:30am (PST)
Auction Type: Global Online Auction
Location: 438 Lavender Drive Rome, GA 30165
Description:

Poultry/Meat Products Food Processing Plant

Poultry/Meat Products Food Processing Plant

Featuring:

MIXER / GRINDERS

 

Wolfking Dual Ribbon Mixer Grinder, Model: TSMG-2750/250-0, SN: 60156, Mounted on Load Cells with Allen Bradley 550 Panel View Controls, Column Dumper, S/S Inclined Auger Conveyor & Hydrauflaker, Model: HF-111

 

Wolfking Dual Ribbon Mixer Grinder Mounted on Load Cells with Emery Winslow Digital Read Out, Model: 7600E & Column Dumper

BLENDERS

     

AMFEC 2,000 LB Capacity Sani-Mix Vacuum Mixer/Blender, Model: 510, SN: 1033 with CO2 Injector, Air Assist Lid, Column Dumper & Hydraulic Drive

 

Reitz 2,000 LB Capacity Ribbon Blender, Model: RS-23-K5406, SN: RS-760146, with CO2 Injection & Wolfking Column Dumper

 

Wolfking 2,000 LB Capacity Vacuum Mixer, Model: TSMV.2000L, SN: 52414 with CO2 Injection & Column Dumper

GRINDERS

   

Wolfking Grinder, Model: O.250-Uni, SN: 51608 with Column Dumper

 

Weiler Grinder, Model:1109, SN: 89308

 

Weiler Grinder, Model: 74-362, SN: 1167 with S/S Inclined Auger Conveyor with Hydraulic Drive & Hydrauflaker, Model: HF-111

 

Mezza 50 HP Auger Grinder with Inclined Auger Conveyor with Hydraulic Drive

 

Large Quantity of S/S Dies, Knives, Augers

SPIRAL COOKERS

       

GCO Stein 8,000 LB Per Hour Spiral Cooker, Rebuilt 2009 with New Belt & Bearing, $200,000+ Spent, Including: Oil Filter System, Conveyor & Controls

 

Stein 4,000/5,000 LB per Hour Spiral Cooker, Model: CM-40, SN: 508 with Conveyor, Oil Filter System & Controls, Thermal Fluid or Steam

 

Stein Spiral Cooker 4,000/5,000# per hour, SN: GCO-1-103 with Oil Filter System, Tri Clover Pump & Conveyor, Gas or Steam

FRYERS & STEAM OVEN

       

Stein 8,000 LB per Hour Fryer, SN: 208, 30'± Long with Controls & Fire System

 

Stein 4,000/5,000 LB per Hour Gas Fryer, Model: HPF-2823, SN: 102, 32" Wide Belt, Level Pump & S/S Duct Work

 

Stein 4,000/5,000 LB per Hour Gas Fryer, Model: TFF-4028, SN: 312 with Oil Recovery System, Fire System & Controls

 

McGill Fryer with 25" Wide Belts, 20' Fryer Section, S/S Duct Work, Controls, Oil Pump, Oil Screen & Fristam Pump

 

35" Wide x 80' Long S/S Steam Oven with S/S Duct Work & Conveyor

NITROGEN SPIRAL FREEZER & TUNNEL

     

Holox All S/S Spiral Freezer, 30" Wide Belt, 7" Spacing & Controls

 

Cardox Ultra-Freezer, Model: 1-55-003-48, SN: 48-220, 48" Wide Belt, 22' x 8" Long

NEW 2010! OIL PRE-HEAT SYSTEM

NEW 2010 - Heat & Control Oil Pre-Heat System with Coil Type Heat Exchanger, Model: CTHX-20, SN: 1004 with S/S Tank, Pumps, Blower, Holding Tank & S/S Stack

OIL RECOVERY SYSTEM

   

H.E.A.T. Inc Oil Recovery System with (2) 2010 750± Gallon S/S Tanks New 2010, (4) Fristam Pumps, S/S Ball Valves, 1.5" to 2" Pipe, VFD's & Controls

TUMBLERS

(2) Globus S/S Vacuum Tumblers with Emerson VFD's & Busch Vacuum Pump

 

(2) S/S Tumbler with Drive Units

INJECTOR

 

Gunther Injector, Model: P150/100, SN: 2258

FORMAX PATTY FORMERS

   

(3) Formax S/S Model: 26 Patty Formers and Updated Controls, + (1) Parts Machine

BATTER APPLICATORS - NEW AS 2010!

   

2010 Stein All Purpose Batter Applicator with 35" Wide Belt

 

(7) Addition Stein Batter Appliances

AMMONIA SPIRAL FREEZERS

   

(2) Frigoscandia Gyro Freeze Spiral Freezer, SN: 6799 with 36" Wide Belts, 5.5" to 11.5" Spacing & Frick Screw Air Ammonia Compressor, Model: RWB11-177H, SN: 50044EFMPW HAB3 with RWB Plus II Controls, Ammonia Circulating System & Evaporative Condenser

 

(4) York Spiral Freezers, Including: (1) Series 5, 20" to 34" Wide Belts, 2.75" to 3.75" Spacing

STUFFER

Handtmann Stuffer, Model: VF200, SN: 3979 with Dumper

PACMAC FORM, FILL & SEAL SYSTEM

     

Pacmac Form Fill & Seal Filler, Model: 9500, SN: 95002168 with Ishida, 14-Head Scale, Model: CCW-5-21, Up to 8" Bags, 1" to 19" Long

CASE SEALERS

(6) Soco All S/S Top & Bottom Case Sealers

METAL DETECTORS

     

(2) Safeline Mettler Toledo Metal Detectors with 35.5" x 2" Apertures

 

(2) Safeline Metal Detectors with 33.5" x 3.75" Apertures

 

Safeline Metal Detector with 25.5" x 10.5" Aperture

 

Goring Kerr Metal Detector with 14" x 9" Aperture

 

Safeline Metal Detector with 7.5" x 14" Aperture

WASTE TREATMENT SYSTEM

       

Aqua Aerobic DAF Waste Water Treatment System with Roto Screen, (6) Roots 40 HP Blowers, ISCO Ultrasonic Flow Meter, Model: 4210, Trent Filter Press, Model: 361, (6) Gorman Rupp Pumps, Holding Tube, Diaphram Pumps, Vacuum Pumps, (3) Smith, 340,000 & 177,000 Gallon Tanks & Spare Parts

REFRIGERATION

   

FES 400 HP Screw Ammonia Compressor with 2007 Dunham Bush Head, Model: 2018, SN: X-2910 with Micro II Controls and Cutler Hammer Starter

 

Frick 400 HP Screw Ammonia Compressor, Model/SN: TDSH23351448L with RDB Plus II Controls & Square D Starter

 

FES 400 HP Screw Ammonia Compressor with Mycom Head, Model: 320MU-LX, SN: 3231203 with Micro II Control & Cutler Hammer Starter

 

Frick 350 HP Screw Ammonia Compressor, Model/SN: TDSH193L3653D with RDB Plus II Controls & Square D Starter

 

FES 300 HP Screw Ammonia Compressor, Model: 225, SN: 2035433 with Micro II Control & Cutler Hammer Starter

 

Frick 300 HP Screw Air Compressor, Model: RDD 399, SN: 30058MFTHHA3 with RDB Plus II Controls and Square D Starter

 

Frick 250 HP Screw Ammonia Compressor, Model/SN: TDSL283L0075HH with RDB Plus II Controls and Square D Starter

 

FES 200 HP Screw Ammonia Compressor, Model: 480BLE, SN: 2532025 with Micro Master II Controls & Cutler Hammer Starter

 

Vilter 75 HP 6 Cylinder Ammonia Compressor, Model: 446, SN: 11799ABR

 

Frick 7 x 7 Ammonia Compressor

EVAPORATIVE CONDENSERS

 

(3) Frick Evaporative Condensers, Model: AFC-240, SN: 90019, 90018 & 90016

 

(2) Evapco Evaporative Condenser, Model: PMC-795N, SN: 857041

 

Imeco Evaporator, Model: XPL-575, SN: 8005/RH

 

Ammonia Circulating System with Cornell Pumps, Valves, Receiver, Hansen Auto Purzer & Piping

AMMONIA BLOWERS

(8) Krack Low Profile Ammonia Blower

 

(3) Frigid Coil 5-Fan Ammonia Blower

 

(8) Frigid Coil, Frick, Evapco & Krack 3-Fan Ammonia Blowers

 

(5) Evapco & Frigid Coil 2-Fan Ammonia Blower

BOILER, AIR COMPRESSORS & DRYERS

Johnson 600 HP Boiler with Feed System & 2009 Marlo Water Softener

 

Ingersoll Rand 100 HP Screw Air Compressor, Model: SSP-EP100, SN: CK1457U98309

 

Ingersoll Rand Refrigerated Air Dryer, Model: DXR 100, SN 951DXR38

 

Ingersoll Rand Refrigerated Air Dryer, Model: TS500, SN: 42493213

 

Vertical Air Receiver with Piping

HYDRAULIC SYSTEMS

(4) Hydraulic Systems, (1) with (5) 40 HP Pumps, (1) with (7) Pumps, (2) 1-Pump Units & Evapco Cooling Tower & Piping

PALLET WRAPPER - DIGITAL SCALES

 

Wulftec Pallet Wrapper, Model: WRT-150, SN: 1027-1-0803

 

Over (35) Doran & Other S/S Digital Scales

LAB EQUIPMENT

BWI, Kartridgepak & Anyl-Ray Fat Analyzers, S/S Lab Counters & Tables, Hobart Fryer, Blodgett Oven, Kewaunee Lab Hood, Barnstead Water Still, Model: MP-3A, Thermolyne Furnace, Model: 6000 & VWR Scientific Oven, Model:1350FM

CHILLER - OIL TANKS

Chester Jensen S/S Falling Film Chiller, SN: 28985

 

(2) Crepaco 1,500 Gallon S/S Rect. Tanks with S/S Fronts

 

(4) Oil Holding Tank, S/S Water Tank, (4) Pumps & S/S Duct Work

SWITCH GEAR

Square D 3,000 Amp, 440/277 Volt Main Distribution Panel

 

(2) Square D, Model: 5, MCC's with 16 & 8 Disconnects

 

Siemens MCC with (32) Disconnects

 

Square D S/S Safety Switches, VFD's & Controls

EMERGENCY GENERATOR

Olympian 400 Amp, 600 Volt, 312 KVA Emergency Generator with Caterpillar Diesel Engine, Model: 97A-04717-S, SN: 00151-K35104D18CFYNC and Transfer Switch

HIGH SPEED ROLL-UP DOORS - PROPANE TANK

(6) Rollseal 5' Wide Hi-Speed Roll Up Doors

 

(2) Rite Hite 5' & 8' Wide Hi-Speed Roll Up Doors

 

30,000 Gallon Propane Tank with Vaporizer

ADDITIONAL FOOD PLANT EQUIPMENT

S/S Sinks, (2) Kettles, Hydraulic Dump Stations, Wash Down Hose, 1,000' S/S Frame Product Conveyor, S/S Steps, S/S Platforms, Cardboard Bailer & Trash Hopper

 

High Pressure Wash System mounted in Ford F-700 Turck, Gas Motor & Cat Pump, (2) S/S Tumblers with Drives, S/S Hopper, S/S Diaphram Pump, S/S Auger Conveyor, Blentech Batter Mixer SH-5000, SN: 94397

 

Stein Batter Mixer, Hobart Grinder, Case Sealer, Grinder Auger & Dies, Mixers, Fryers, Krack Compressor Units

SPARE PARTS INVENTORY

     

Leeson, Baldor & Reliance Motors, Hydraulic Motors, Control Valves, Regulators, Electricals, Starters, Safety Switches, VFD's Timken, SKF, National & other Bearings, S/S Fittings, Lovejoy Couples, Sprockets, Chain, Hardware, Large Quantity S/S Belting, to 36" Wide Interlox Belting

SHOP EQUIPMENT - GENERAL PLANT

Jet 16 Milling Drill, Parts Washer, Miller Thunderbolt XL Welder, Gates & Dayco Hydraulic Hose Crimper, Chop Saw, Summit Lathe, Arbor Press, Vertical Milling Machine, Hydraulic Press, Horizontal Band Saw, Sander, Drill Press, Brake, Rigid Pipe Machine, Profit Master Lathe, (2) Plastic Cutter, Bench & Drill Welder, Table Saw, Work Bench & Vises

 

GENERAL PLANT: Flammable Storage Cabinets, Office Furniture, Dollies, Hydraulic Pallet Jacks, Shelves, Pallet Racking, Printers & More!

Payment Info:

A 12%* BUYER’S PREMIUM APPLIES TO ALL SALES.

Full payment day of sale in guaranteed or certified U.S FUNDS. Company check accepted with letter of approval from your bank. Direct wire transfers accepted ONLY with prior arrangement. You are urged to inspect before the sale. Although information has been obtained from reliable sources, the Auctioneer makes no warranty or guarantee, express or implied as to the the accuracy of information in this brochure. Additional terms to be announced at sale. Click here for additional Terms of Sale. Absentee bidding also available, click below for details. *Online bidding: 15% Buyers Premium.

Bank Letter of Approval
Absentee Bidder Form
Online Bidding

Removal Info:

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.