On-site and Global Webcast Auction

LATE MODEL HEAVY FABRICATING FACILITY

Auction Info

Late Model Heavy Fabricating Facility, Consisting of: 12’ Cincinnati Brake and Shear, CNC Lockformer, Plasma Torch Cutter, Turret Presses, Ironworkers and Much More!


Terms & Conditions

Auction Dates

Starts
Thursday, March 17, 2011 - 10:30am (PDT)

Auction Type

On-site and Global Webcast Auction

Location

555 W. 18th Street Hialeah, FL 33010

Description

Late Model Heavy Fabricating Facility

Featuring

 HYDRAULIC PUNCHES:

  • 50 Ton Piranha Hydraulic Punch, S/N PP-123 w/ 3 HP Hyd. Unit With infeed conveyor, 220/30hp
  • 60 Ton Whitney Hydraulic Punch, Model 630B, S/N 630-600-22541 W/Tracing Attachment, Table Size 72” x 48”, With Lots of Tooling


TURRET PUNCHES:

  • 20 Ton Draco Turret Punch w/ Updated CNC Control Centroid, Model OCT20, S/N 0640880114, 230/3/60 Volt, Table 48 x 72


SURFACE GRINDERS

  • (2) Delta Surface Grinders, S/N 99-18, 6x 12 Hand feed, 1 HP


BAND SAWS:

  • New 2009 24” x 16” Hyd-Mech Horizontal Band Saw, Model S-23A, S/N XA0306387AD, 10’in conveyor, 30’ out, W/Hyd. Clamping, Mitering, Digital Cont.
  • 24 x 12" Jaespa Horizontal Band Saw, Model W260, S/N 1236382
  • 16" Dual Vertial Band Saw, S/N 412923 w/ Blade Welder
     

LATHES:

  • 12 x 36" Sharp Lathe w/Tooling


SPOT WELDERS:

  • Ames Spot Welder, 50 KVA, 18” Throat, 220/3/60
  • Thompson Welder, 20 KVA 18” Throat, 220/3/60


FORKLIFTS:

  • 7,000 lb. Komatsu Model FG335, S/N 95079, Propane, Solid Tire, Side Shifter, Auto Trans


LIFTS:

  • 1,500 lb/ Pettibone Electric/Hyd. Lift, Model 1524, S/N 352948


AIR COMPRESSORS (Late Models Up to Yr. 2000):

  • Chandler 5 H.P. Air Compressor, Tank Mounted
  • Airco Air Compressor, 25 HP
     

WELDERS:

  • Miller Welder, S/N L0090065, 250 Amp, 230/460V
  • Lincoln Idealarc  Welder, Model R3S-325/8112-AR, S/N A0447902, w/Lincoln LN-7 Wire Feed
  • Miller Sincrowave 250, S/N KJ155917, 230v/460 AC/DC w/Dynatuly
  • (2) Miller Portable Gas Welders
  • Bobcat 225NT&G, 225 Amp
  • Airco DC Welder, 250 Amp w/Propane
  • Lincoln Tig Welder, Model Tig – 300/300 Arc Welder
  • Esab Welder, Model PCM-875, S/N 50192
  • (2) Millermatic Welders 250X CV-DC, With Wire Feeder
  • Hobart TR250 AC/DC Welder
     

POWER ROLLS:

  • Niagara 4’ x 16 Ga. Power Roll


NIBBLERS:

  • 48" Pullmax Nibbler, Model P7, S/N 52305
     

PLASMA CUTTER:

  • Lockformer Torch System (Plasma) – Late Model (2000’s), Model 1800 Vulcan, S/N 886057, w/Airo-AP100 Plasma w/Hybrid D6 CNC Controls On Track, Capacity 72” x 15’ Travel, 115V/ Single Phase


SHEARS:

  • 12' x 3/16" Cincinnati Shear, Model 1412, S/N 35395, Equipped with F.O.P.B.G. 36” 10 Sq. Arm, Ft. Arm Supports, Lights, Ft. Pedal Control, Bijur Lub, Pexto 36” 16 ga. Foot Shear


PRESS BRAKES:

  • 12' x 225 Ton Cincinnati Mechanical Press Brake, Model 9x12, S/N 36104, Motorized Adj., Manual Backgauge, Foot Pedal Controls, w/Riser Block
  • 72" x 90 Ton Vickers Mechanical Press Brake, Model 90-6, S/N SCP10106, 3” Stroke/30 SPM, w/ Die Rails, Ft. Pedal Controls


CNC BRAKE:

  • 2008 Promecam Hydraulic CNC Press Brake, Model R635-20, S/N 323520825, w/ Hurco Auto Bend IV CNC Controls


HAND BRAKE:

  • Chicago 4’ x 16 ga. Finger Brake, Model W34, S/N 86616


BENDERS:

  • 1998 NCML Hydraulic Bender, Model Super Bender, S/N 4980254 110V
  • Pexto 30” Bender, 3/4 H.P.


VERTICAL MILLS:

  • 10' x 36" Bridgeport Vertical Mill w/ Power Feed, 1 HP


IRONWORKERS:

  • 20 Ton, 2” x 2” x 1/4” Mule & Bender Ironworker, Model BF10F, S/N 163/23605/20
  • 90 Ton Pirahna Hydraulic Ironworker – Late Model, Model  F90, S/N 938 Complete with: Gauging, Punch, Copper/notcher, Extended Gauge Bar Back


PRESSES:

  • 25 Ton Rouselle O.B.I. Punch Press, Model 3, S/N 22773, 3” Stroke
  • 30 Ton x 36” Multimax Mechanical Press, Model 3036, S/N 110


TRUCKS:

  • 1995 Isuzu Flat Bed Truck Dual Wheel – 20’ Bed Turbo Diesel


TRENCH OPENERS:

  • Ditch Wiotch/Trench Opener, Mfg. Vermeer Model T-218 GasPowered


NEWSTEEL:

  • Steel “New” Tubing,  Capacity 3” x 3” x 20’ 150 Pieces Approx.


MISCELLANEOUS:
Jib Crane 1 Ton, 24” Hand Brake, Steel  Plate Sheet, 12” Cutoff Saw, Banding Equipment, Racks, Steel Angles, Bars, Tubing, Trinco Sand Blast Cabinet, Dayton Floor Fans, Air Hose, Electric Cord, Welding Tables (Steel), Lots of Misc. Dies, Baldor 6” Vertical Sander, Torch Set, Motors – Various H.P., Portable Air Compressor, Mfg. Titan, C Clamps, Steel Table 48” x 20’, 48” x 10’, Cabinets – Paint and Fire Proof, Scale, Ladders, Enco Vertical Drill Press, Mod. 40030, S/N E9-12, W/Chuck, Floor Fans, Compression Tester, Mfg. Furney, Model QC-125, Morse Barrell Tumbler, Single Arm Plasma Torch, With Table, Hoists, Delta Vertical Drill Press w/ Tapping Attachment, Table Saws, Vertical Band Saws,  Ruemelin Blast Equipment,  Dewalt 36” Radial Ram Saw,  Rockford Drill Press , Horizontal 48” Adj. Pallet Rack, (2) Arbor Presses, Pexto Hand Shear, Enervac Hyd. H Frame Press, With Hyd. Unit, Trash Pump 2” Cap., Mfg. Titan, Pulleys

Registration Info

Bidders Must Agree to All Terms & Conditions.

ONSITE BIDDERS:
Registration is available onsite. On the day of the sale all purchases must be paid in full or a mandatory 25% deposit is due at time of purchase. PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.

PROXY BIDDERS:
If you are unable to attend our auction or participate via the internet, please fill out, sign and fax back the BIDITUP Terms and Conditions contract.

A 25% deposit of your total maximum bid(s) will need to be submitted to BIDITUP Auctions Worldwide, Inc. for your proxy bid approval.

If you are using a credit card for your deposit, please fill out, sign and fax the credit card authorization form to our office with the 25% amount of your desired credit limit in the ‘Amount’ box.  See other methods below.

INTERNET BIDDERS:
United States and Canadian bidders do NOT need to submit a deposit to bid.

Payment Info

Buyer’s Premium: A 15% Buyer’s Premium Will Be Charged At This Sale.

An Additional 3% Will Be Charged To Internet Bidders.

Acceptable Payment Methods:
1. Cash
2. Cashier’s Check
3. Wire Transfer
3. Corporate check*
4. Personal and company checks*

*Acceptable at the Auctioneer’s sole discretion. Must be accompanied with a bank letter of guarantee from company’s bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS! The credit card authorization form is provided only for proxy bidders and online bidders who need to submit deposits.

Download and complete the appropriate form for Bidder Authorization. Once complete, fax it to 818.508.3025.

Removal Info

AAA Machinery Services
Marvin Baltodano
Phone: 305-836-9945
Email:  [email protected]