Global Online Auction

NO RESERVE AUCTION - 3 STEEL SLITTING LINES: R-L  24" BROOKES SLITTING LINE, R-L 28" SLITTING LINE & R-L 53" WEAN REMOVABLE HD SLITTING LINE

Auction Dates:
Starts: Tuesday, July 10, 2012 - 2:00pm (EST)
Ends: Friday, August 10, 2012 - 2:00pm (EST)
Auction Type: Global Online Auction
Location: 10 Industrial Hwy., Lester, PA  19029
Description:

NO RESERVE AUCTION - METAL PROCESSING EQUIPMENT: R-L  24" BROOKES SLITTING LINE, R - L 28" SLITTING LINE & R - L 53" WEAN REMOVABLE HD SLITTING LINE

R-L 24'' BROOKES SLITTER: 10hp Drive Motor @ 1750rpm; Driving 3'' diameter arbor w/ Keyways; Cutting Capacity: 20 Cuts of .024'' Mild steel/ 2 Cuts of .150'' Mild steel; Entry Side Guide Unit: (3) large dia. Fiber covered rolls; (1) entry 3'' dia. Roll; Coil Loading Car: 6000lb. capacity; Paper Rewinder: Motor driven shaft manually expanded to grip cardboard cores; L-R Littell Uncoiler: Mdl: 60-24; 6000lbs capacity; 16'' to 20'' I.D. coils; 24'' coil width capacity; air operated band type tension brake; Dual Paper Rewind Stand: (2) 6'' dia. Independently hydraulically driven expanding shafts;  2500lb max capacity for each shaft; L-R Recoiler: 4'' dia. X 32” L shaft w/ keyway and back plate; 4000lb capacity;
R-L 28'' SLITTER: 75hp U.S. DC Motor @ 850; 4 ½'' arbor(s) dia.; Cutting Capacity: 20 Cuts of .060'' Mild steel/ 3 Cuts of .187'' Mild steel; Entry Side Guide Unit: Pressure pads; Two Frames; one per each side of the incoming strip; each containing (2) vertically held rotatable rolls and adjustable to make contact with the strip edges;  R-L Coil Tech Coil Tension Unit:  (2) Felt pressure pads; R-L Coil Tech Recoiler:  16'' drum x 30'' face; 10k capacity; Emerson 40hp DC motor @ 850/2550rp; Tooling bar w/6'' diameter separator discs and 4'' diameter spacers;  Transfer Horn: Single arm horn; 10k capacity x 30''wide;  Loopco Coil Transfer Car: 10k Capacity
R-L WEAN 53'' REMOVABLE HD. SLITTER: 65hp GE DC Motor @ 850/2550rpm; 6'' Arbor diameter w/ Keyways; Driven Knife Speeds = 216 & 650fpm using an 11'' Dia. Knife; Cutting Capacity: 20 Cuts of 18ga. Mild steel/ 3 Cuts of 7ga. Mild steel; Entry Side Guide Unit: Two Frames; one per each side of the incoming strip; each containing (3) vertically held rotatable rolls and adjustable to make contact with the strip edges; Two motor driven 6'' dia. Pinch rolls

Photo Gallery:

Featuring:

R-L Wean 53" Removable HD. Slitter: Driven and Pull-thru w/ Overrunning Clutches; 65hp GE DC Motor @ 850/2550rpm connected to an Intermediate Nuttall Gear Reducer of 11.3 Ratio; 6" Arbor diameter w/ Keyways; Driven Knife Speeds = 216 & 650fpm using an 11" Dia. Knife; Pull-Thru speeds dependent on recoiler drive system; Arbors vertically adjusted by overhead jackscrews; Outboard housing moved into and out of arbors by hand wheel and connected machine screw.
Cutting Capacity: 20 Cuts of 18ga. Mild steel/ 3 Cuts of 7ga. Mild steel (Customer to determine speeds for different gauges and number of cuts)
Entry Side Guide Unit: Two Frames, one per each side of the incoming strip, each containing (3) vertically held rotatable rolls and adjustable to make contact with the strip edges; Two motor driven 6" dia. Pinch rolls; Upper roll raised and lowered by cylinders; Entry pass line roll by customer if required

R-L 28" Slitter: Driven and Pull-thru w/ Overrunning Clutches; 75hp U.S. DC Motor @ 850 coupled to an intermediate Foote-Jones gear reducer @ 3.375:1 ratio; 4 ½" arbor(s) dia. W/ keyways; Pull-thru speed dependent on recoiler drive systems; Upper Arbor vertically adjusted by overhead jackscrews; Outboard housing moved into and out of arbors by hand wheel and connecting screw
Cutting Capacity: 20 Cuts of .060" Mild steel/ 3 Cuts of .187" Mild steel (Customer to determine speeds for different gauges and number of cuts)
Entry Side Guide Unit: Pressure pads, upper pad manually adjustable; Two Frames, one per each side of the incoming strip, each containing (2) vertically held rotatable rolls and adjustable to make contact with the strip edges
R-L Coil Tech Coil Tension Unit: Welded and machined containing; entry strip separator tooling bar w/tooling; (2) Felt pressure pads; Lower Pad is stationary, upper pad is raised and lowered by (2) large size air cylinders; Exit strip separator and direct coupled to a water cooled Wichita Brake; upper roll is pivoted up and down by (2) cylinders and is motor driven for feed-up of slit strips; Rolls are joined together by spur gearing in the down position; electrical operating buttons mounted to side of housing
R-L Coil Tech Recoiler: 16" drum x 30" face; 10k capacity; Manual expand, collapse and gripping; Emerson 40hp DC motor @ 850/2550rpm coupled to an intermediate; Foote-Jones Gear reducer @ 7.59:1 Ratio: Minimum bare drum running speed – 469fpm; Cylinder operated overarm separator unit; Tooling bar w/6" diameter separator discs and 4" diameter spacers; Pusher plate hydraulically
Transfer Horn: Single arm horn; 10k capacity x 30" wide; manually rotated; hydraulic push off plate; horn is raised and lowered hydraulically
 Loopco Coil Transfer Car: 10k Capacity; Driven

R-L 24" Brookes Slitter: Driven and Pull-thru w/ Overrunning Clutch; 10hp Drive Motor @ 1750rpm connected to chain and sprocket; Driving 3" diameter arbor w/ Keyways; Pull-Thru speeds dependent on recoiler drive system; Upper arbors vertically adjusted by screw arrangement; Outboard housing moved in and out of arbors manually; meters and controls mounted on slitter base.
Cutting Capacity: 20 Cuts of .024" Mild steel/ 2 Cuts of.150" Mild steel (Customer to determine speeds for different gauges and number of cuts)
Entry Side Guide Unit: (3) large dia. Fiber covered rolls offset to help lay material flat before entering slitter knives; entry and exit roll adjustable up and down manually; (1) entry 3" dia. Roll; strip edge guided by an adjustable electric eye; wheel sheet length counter adjustable across strip; complete entry side guide unit frame can be pivoted away from slitter base
Coil Loading Car: 6000lb. capacity; traversing "L" shape inner and outer frames; outer frames traverses on (4) "v" shaped wheels and tracks; rear wheels are hydraulically driven; inner frame receives coils on its "v" style rotatable lifting platform; inner frame is raised and lowered by a hydraulic cylinder; unit supplied with pushbutton station and hydraulic components
Paper Rewinder: Free standing base; motor driven shaft manually expanded to grip cardboard cores; cores are used to rewind interleaved paper from uncoiler coils; tension adjustable brake
L-R Littell Uncoiler: Mdl: 60-24; 6000lbs capacity; (4) segment type with 27" face width; expand and collapse by hydraulic cylinder; 16" to 20" I.D. coils; 24" coil width capacity; air operated band type tension brake; traversing base by hydraulic cylinder; floor to center of reel – 30"
Dual Paper Rewind Stand: (2) 6" dia. Independently hydraulically driven expanding shafts; each shaft grips and releases the inside dia. Of a cardboard core for rewinding and dispensing of wound material; 2500lb max capacity for each shaft; frame measures 30"L x 30"W x 52"T
L-R Recoiler: 4" dia. X 32" L shaft w/ keyway and back plate (a recoiler drum must be added to this unit to be usable); DC motor coupled to a gear reducer connected w/ chain and sprocket to main drive; 4000lb capacity; speed of line determined by operator per cuts of metal; controls @ slitter unit

Registration Info:

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned
   spending amount or a $2,500 Minimum Deposit in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.
ONSITE BIDDERS
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit
   or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company
   check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days ***

   PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE
   TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order
   to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.

Payment Info:

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info:

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.