On-site and Global Webcast Auction

MACE METAL SALES INC. - COIL PROCESSING SERVICE CENTER FEATURING: COMPLETE LATE MODEL SLITTING, EDGING, LEVELING, AND STEEL SERVICE CENTER

Auction Dates:
Starts: Wednesday, February 20, 2013 - 10:00am (PST)
Auction Type: On-site and Global Webcast Auction
Location: 5555 East Slauson Ave, Commerce, CA 90040
Description:

MACE METAL SALES INC. - COIL PROCESSING SERVICE CENTER FEATURING: COMPLETE LATE MODEL SLITTING, EDGING, LEVELING, AND STEEL SERVICE CENTER

SLITTING LINES
60" x 44,000# LOOPCO Dual Injector Head Loop Slitting Line (Generation ll): .010 - .187" Thickness Range • Complete Line w/: Line Speed: 220 - 1200 FPM • 20" - 24" Entry Coil ID • 20" Exit Coil ID • 72" Coil OD • Entry L Type Coil Car (Floor Standing/Self Contained Hydraulics) • MANDREL UncoilerWICHITA Water Cooled Brake & Cooler • Sliding Base • 4 Leaf Hydraulic Expansion • Powered Hold Down Roll • Peeler Pinch Roll Unit • Crop Shear w/ Edge Guides • 2 Injector Slitter Heads • 7 1/2" Diameter Arbors • Eccentric Arbor Adjustment • Swinger Head Design • 75 HP DC Slitter Drive • 2 Scrap Winders w/ Oscillating Wind & Auto Eject • Looping Pit Cross Over Table • Drag Board Tension Stand • Feed Up Table • Recoiler • 20" Hydraulic Drum • 2 Speed Gear Box • Overarm Separator • Hydraulic Push-Off • 75 HP DC Drive • Exit L-Type Coil Car (Floor Standing/Self Contained Hydraulics) • Tooling: Knives • Spacers • Rubbers • Electrics: Fincor Solid State SCR Drives • Mdl: 3120M Six SCR44,000# LOOPCO Exit Turnstile w/Power Push-off & Power Rotation
52" x 30,000# BRANER/LOOPCO Turret Head Loop Slitting Line (BRANER Equipment all New In 1999): Complete Line w/: (1999) BRANER Entry L-Type Coil Car (Floor Standing/Self Contained Hydraulics) • LOOPCO MANDREL Uncoiler • Water Cooled Brake & Cooler • 4 Leaf Hydraulic Expansion • Sliding Base • Feed Up Drive • Peeler/Hold Down Roll • Entry Crop Shear • (1999) BRANER Turret Slitter Head • 7 1/2" Diameter Arbors • Motorized Arbor Adjustment • 75 HP DC Drive • (2) (1999) BRANER Scrap Winders • Looping Pit Cross Over Table • (1999) BRANER Drag Board Tension Stand • LOOPCO Recoiler • 20" Hydraulic Drum • Overarm Separator • Power Push-Off • 60 HP DC Drive • (1999) BRANER Exit Coil Car (Floor Standing/Self Contained Hydraulics) • Coil Holder Arms • (1999) BRANER 4 Arm Exit Turnstile (Power Push-Off/Power Rotation) • Tooling: Knives • Spacers • Rubbers • CMC Digital Control System • DIGIMASTER 2000 Digital Drive • CONTROL TECHNIQUES Mentor ll Digital Drive • (Ugraded Hydraulics in 1999) • 1 Arm Turnstile (Power Rotation) • (1999) 20,000# BRANER Coil Car • s/n 9478 A1 • 52" Coil Width (Floor Standing/Self Contained Hydraulics)
24" WEAN Pull Through Slitting Line: MANDREL Uncoiler • Sliding Base • Hydraulic Expansion • Drag Brake • WEAN Slitter Head • 6 1/2" Dia Arbors • 26" Arbor Face • Entry Edge Guides • 40 HP Feed Up Drive • Dual Turret Recoiler • 16" Diameter Drums • Hydraulic Push Off • 40 HP DC Drive • Scrap Winder • Tooling • Electrics • Hydraulics & Controls • Knives • Spacers • Rubbers

EDGING LINE
3" x .187" TISHKEN Edging Line Mdl: STR 30 Coil to Coil & Cut-To-Length: Width Capacity: 3" - 3/8" • Thickness Range: .032" - .187" • Speed: 60 - 180 FPM • Complete Line w/: MANDREL UncoilerTISHKEN Edger • 2 Sets Entry Edge Guides • Driven Mill Stand • 4 Sets of Driven Edging Dies • 1 Driven Mill Stand • 9 Roll Driven Decamber Section • 7 Roll Flattener 3 over 4 Rolls • 2 Post Shear • Flying Die Accelerator • Run Out Table • Recoiler • 12" & 16" Dia Drums • Large Amount of Tooling & Dies

 CUT-TO-LENGTH LINES
60" x .074" MCKAY Cut-To-Length Line w/ Flying Cut-Off: 20,000# Coil Capacity • .020" - .074" Thickness Range • 30 - 180 FPM • Complete Line w/: Entry L-Type Coil Car • MANDREL UncoilerMCKAY 17 Roll Leveler • 1 1/2" Dia Work Rolls • 66" Roll Face • 7 Flights Top & Bottom Back-Ups • Motorized Adjustment • Entry & Exit Pinch Rolls • 50 HP Variable Speed Drive • 4-Post Flying Die Shear • Flying Shear Die Accelerator • Belt Runout Table • Stacker w/ Side Discharge • Durant Digital Counter • Spare Rolls for the Leveler
60" x 12 Ga. ROWE Cut To Length Line: Including: 20,000 Ibs. x 60" W ROWE Coil Reel w/ Coil Car • 15" to 20.5" ID • Equipped w/ Hydraulic Expansion • ROWE Coil Powered Cradle • 0.020"- 0.104" Capacity • ROWE Coil Straightener & Feeder Flying Cut-Off Shear • Equipped w/ Air Clutch • ROWE Air Feeder • 12" - 60" • 60" x 12 Ga. ROWE/WYSONG High Speed Power ShearROWE Hump Table • Max. Width: 60" • Passline Height • 41" • ROWE Sheet Stacker • 12" W x 36" L & ROWE JORGENSEN Conveyor (To be Sold Via Photo • Located in Los Angles, CA - CALL AMY AT 818-508-7034 FOR INSPECTION)

STRADDLE LIFTER
(1984) ROPCO STRADDLE LIFTER, Model: HD-1080S, 100,000 Lbs. Max. Lifting Capacity, 158" Max. Lift Height, 140" Max. Lift Height With Pontoons, 131" Max. Inside Clearance Between Housings, 4 Standard Hook Up Available, 12.5-Ton Rated Capacity of Each Hook, 76" Max. Distance Between Pontoons, 18" Horizontal Travel Of Trolley Less Pontoons, 34' x 18" Diameter Pontoon Size, 18' Wheel Base, 34'1" x 18' 6" x 22' Dimensions (L x W x H) • Equipped With: Rebuilt And New Cummin's B Series 6 Cylinder Diesel Engine Installed In 2006, 2-New Spare Tires & Extra Parts, Automatic Transmission, Hydraulic Brakes, Operation & Parts Man. (Click Here to See Ropco Crane Under Power - To be sold via photo, located in San Luis Obispo, CA - CALL AMY AT 818-508-7034 FOR INSPECTION)

SHEARS
12' x 3/16" CINCINNATI Mdl: 1412 POWER SHEAR, Equipped w/ Rear Operated Manual Back Gauge, Foot Treadle, Auto lube System, Square Arm, Material Supports, Dual Counter Balance 18" Throat, 7.5 HP
(2002) 12' x 1/4" CINCINNATI 250HS HYDRAULIC POWER SHEAR, Equipped w/ Front Operated Power Back Gauge w/Indicator, Power Rake Angle Adjustment Control, Power Length of Stroke Control, Square Arm, Front Material Supports, Oil Cooler, Auto Lube System, Electric Foot Pedal, 25 HP, Strokes Per Minute: 65 Short Stroke, 28 Long Stroke, Dimensions (L x W x H), 196" x 90" x 75", s/n: 52377, (To be sold via photo • located in Branchburg, NJ • CALL AMY AT 818-508-7034 FOR INSPECTION) 

BANDSAWS
30" YATES AMERICAN VERTICAL WOOD BANDSAW, 5 hp
(1986) 16" AMADA Mdl: HA-400 AUTOMATIC HORIZONTAL BANDSAW, s/n 40600683, 7.5 hp, Equipped w/ Variable Speed, Chip Auger & Hyd. Vise & Coolant System
(1981) 16" AMADA Mdl: HA-400 AUTOMATIC HORIZONTAL BANDSAW, s/n 40600282, 7.5 hp, Equipped w/ Variable Speed, Chip Auger, Hydraulic Vise & Coolant System
(1986) 12" AMADA Mdl: HA-250 AUTOMATIC HORIZONTAL BANDSAW, s/n 459195, 3 hp, Equipped w/ Variable Speed, Coolant System, Hyd. Vise

COIL REELS
10,000 LBS. X 10" W COIL REEL, 30/40 hp, Equipped w/ Variable Speed, SABINA DC Drive, Back Plate & Manual Expansion
6,000 LBS. X 24" W AMERICAN Mdl: 1000 COIL REEL, Equipped w/ Variable Speed, Back Plate & Manual Expansion
2,500 LBS. X 8" W TISHKEN COIL REEL, Equipped w/ Back Plate & Manual Expansion
2,500 LBS. X 6" W TISHKEN COIL REEL, 5 hp, Equipped w/ Back Plate & Manual Expansion

CRANES
20-TON BEDFORD OVERHUNG CRANE, 50' Bridge, Equipped w/ Pendant Control
15-TON ARROW CRANEHOIST OVERHUNG CRANE w/ 20-Ton Lifting Hook, s/n 12680-1, 50' Bridge, Equipped w/ pendant Control, NOTE: Late Removal
(2) 2-TON C & M JIB CRANES, 15' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON C & M JIB CRANE, 12' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON COFFING JIB CRANE, 12' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON CLEVELAND TRAMRAIL JIB CRANE, 20' Arm, Equipped w/ Electric Hoist & Pendant Control

MATERIAL HANDLING
23,700 LBS. HYSTER Mdl: H2550E DIESEL FORK LIFT TRUCK, s/n B7P-7885U, w/Dual Front Tire & Side Shift
15,000 LBS. HYSTER Mdl: S100XL PROPANE FORK LIFT, s/n D004D09133X, Equipped w/Cascade Side Shift
(1995) 14,700 LBS. HYSTER Mdl: S155XL PROPANE FORK LIFT, s/n B024D03491S, Equipped w/ Side Shift, NOTE: Late Removal
(2002) 9,100 LBS. HYSTER Mdl: S120XM PROPANE FORK LIFT, s/n E004V01678Z
8,850 LBS. HYSTER Mdl: S80XL PROPANE FORK LIFT, s/n D004V02635K
8,000 LBS.TOYOTA Mdl: 52-6FGCU35 PROPANE FORK LIFT, s/n 60547, Equipped w/ Side Shift
8,000 LBS.TOYOTA Mdl: 52-6FGCU35 PROPANE FORK LIFT, s/n 61368, Equipped w/ Side Shift
6,000 LBS. BRANER MOTORIZED COIL UPENDER 
500 LBS. ALTITUDE ELECTRIC MAN LIFT w/ BATTERIES, 29" x 32" Platform

SHOP EQUIPMENT
50-Ton Carolina H Frame Hydraulic Press16 Gallon Rigid Vacuum, 6.5 hp • 7' X 6' Steel Loading Table 16" Marvel Hacksaw20,000 Lbs. Martin Decker Portable Lifting ScaleSteam Cleaner, Kerosene Fired Apache DC Arc Welder, 175 Amp, 11 hp Briggs & Stratton Motor • 6" X 9" Dayton Belt & Disc Sander, 3/4 hp • Wright Line Utility Cabinet With DrawersOxy Torch Set20" Dayton Floor Drill Press, 1 hp • 6000 Lbs. Carolina Cherry Picker(2006) 3-Ton Rival Mdl: Rvsl 600 Sheet Lifter20 hp Kellogg-American Air Compressor 80 Cfm Arrow Refrigerated Air Dryer(2003) Compair Air Dryer120 Gallon Vertical Airtank 36" Yates American Vertical Wood Saw16" Dewalt Radial Arm Saw w/ Dust Collector

MISCELLANEOUS
Nailers, Bench Grinder, Chain, Motors, Light Bulbs, Gas Cans, Saws, Pressure Gauges, Batteries, Hand Grinders, Hand Drills, Staple Guns, Drill Bits, Grease Guns, Blower Vac, Hand Staplers, Electrical Relays, Bearings, Oil Seeals, Wrenches, C-Clamps, Wire Cutters, Tool Boxes, Battery Charger, Bench Vise, Ladder, Fans, Etc

Photo Gallery:

Featuring:

SLITTING LINES
60" x 44,000# LOOPCO Dual Injector Head Loop Slitting Line (Generation ll): .010 - .187" Thickness Range • Complete Line w/: Line Speed: 220 - 1200 FPM • 20" - 24" Entry Coil ID • 20" Exit Coil ID • 72" Coil OD • Entry L Type Coil Car (Floor Standing/Self Contained Hydraulics) • MANDREL UncoilerWICHITA Water Cooled Brake & Cooler • Sliding Base • 4 Leaf Hydraulic Expansion • Powered Hold Down Roll • Peeler Pinch Roll Unit • Crop Shear w/ Edge Guides • 2 Injector Slitter Heads • 7 1/2" Diameter Arbors • Eccentric Arbor Adjustment • Swinger Head Design • 75 HP DC Slitter Drive • 2 Scrap Winders w/ Oscillating Wind & Auto Eject • Looping Pit Cross Over Table • Drag Board Tension Stand • Feed Up Table • Recoiler • 20" Hydraulic Drum • 2 Speed Gear Box • Overarm Separator • Hydraulic Push-Off • 75 HP DC Drive • Exit L-Type Coil Car (Floor Standing/Self Contained Hydraulics) • Tooling: Knives • Spacers • Rubbers • Electrics: Fincor Solid State SCR Drives • Mdl: 3120M Six SCR44,000# LOOPCO Exit Turnstile w/Power Push-off & Power Rotation
52" x 30,000# BRANER/LOOPCO Turret Head Loop Slitting Line (BRANER Equipment all New In 1999): Complete Line w/: (1999) BRANER Entry L-Type Coil Car (Floor Standing/Self Contained Hydraulics) • LOOPCO MANDREL Uncoiler • Water Cooled Brake & Cooler • 4 Leaf Hydraulic Expansion • Sliding Base • Feed Up Drive • Peeler/Hold Down Roll • Entry Crop Shear • (1999) BRANER Turret Slitter Head • 7 1/2" Diameter Arbors • Motorized Arbor Adjustment • 75 HP DC Drive • (2) (1999) BRANER Scrap Winders • Looping Pit Cross Over Table • (1999) BRANER Drag Board Tension Stand • LOOPCO Recoiler • 20" Hydraulic Drum • Overarm Separator • Power Push-Off • 60 HP DC Drive • (1999) BRANER Exit Coil Car (Floor Standing/Self Contained Hydraulics) • Coil Holder Arms • (1999) BRANER 4 Arm Exit Turnstile (Power Push-Off/Power Rotation) • Tooling: Knives • Spacers • Rubbers • CMC Digital Control System • DIGIMASTER 2000 Digital Drive • CONTROL TECHNIQUES Mentor ll Digital Drive • (Ugraded Hydraulics in 1999) • 1 Arm Turnstile (Power Rotation) • (1999) 20,000# BRANER Coil Car • s/n 9478 A1 • 52" Coil Width (Floor Standing/Self Contained Hydraulics)
24" WEAN Pull Through Slitting Line: MANDREL Uncoiler • Sliding Base • Hydraulic Expansion • Drag Brake • WEAN Slitter Head • 6 1/2" Dia Arbors • 26" Arbor Face • Entry Edge Guides • 40 HP Feed Up Drive • Dual Turret Recoiler • 16" Diameter Drums • Hydraulic Push Off • 40 HP DC Drive • Scrap Winder • Tooling • Electrics • Hydraulics & Controls • Knives • Spacers • Rubbers

EDGING LINE
3" x .187" TISHKEN Edging Line Mdl: STR 30 Coil to Coil & Cut-To-Length: Width Capacity: 3" - 3/8" • Thickness Range: .032" - .187" • Speed: 60 - 180 FPM • Complete Line w/: MANDREL UncoilerTISHKEN Edger • 2 Sets Entry Edge Guides • Driven Mill Stand • 4 Sets of Driven Edging Dies • 1 Driven Mill Stand • 9 Roll Driven Decamber Section • 7 Roll Flattener 3 over 4 Rolls • 2 Post Shear • Flying Die Accelerator • Run Out Table • Recoiler • 12" & 16" Dia Drums • Large Amount of Tooling & Dies

CUT-TO-LENGTH LINES
60" x .074" MCKAY Cut-To-Length Line w/ Flying Cut-Off: 20,000# Coil Capacity • .020" - .074" Thickness Range • 30 - 180 FPM • Complete Line w/: Entry L-Type Coil Car • MANDREL UncoilerMCKAY 17 Roll Leveler • 1 1/2" Dia Work Rolls • 66" Roll Face • 7 Flights Top & Bottom Back-Ups • Motorized Adjustment • Entry & Exit Pinch Rolls • 50 HP Variable Speed Drive • 4-Post Flying Die Shear • Flying Shear Die Accelerator • Belt Runout Table • Stacker w/ Side Discharge • Durant Digital Counter • Spare Rolls for the Leveler
60" x 12 Ga. ROWE Cut To Length Line: Including: 20,000 Ibs. x 60" W ROWE Coil Reel w/ Coil Car • 15" to 20.5" ID • Equipped w/ Hydraulic Expansion • ROWE Coil Powered Cradle • 0.020"- 0.104" Capacity • ROWE Coil Straightener & Feeder Flying Cut-Off Shear • Equipped w/ Air Clutch • ROWE Air Feeder • 12" - 60" • 60" x 12 Ga. ROWE/WYSONG High Speed Power ShearROWE Hump Table • Max. Width: 60" • Passline Height • 41" • ROWE Sheet Stacker • 12" W x 36" L & ROWE JORGENSEN Conveyor (To be Sold Via Photo • Located in Los Angles, CA - CALL AMY AT 818-508-7034 FOR INSPECTION)

STRADDLE LIFTER
(1984) ROPCO STRADDLE LIFTER, Model: HD-1080S, 100,000 Lbs. Max. Lifting Capacity, 158" Max. Lift Height, 140" Max. Lift Height With Pontoons, 131" Max. Inside Clearance Between Housings, 4 Standard Hook Up Available, 12.5-Ton Rated Capacity of Each Hook, 76" Max. Distance Between Pontoons, 18" Horizontal Travel Of Trolley Less Pontoons, 34' x 18" Diameter Pontoon Size, 18' Wheel Base, 34'1" x 18' 6" x 22' Dimensions (L x W x H) • Equipped With: Rebuilt And New Cummin's B Series 6 Cylinder Diesel Engine Installed In 2006, 2-New Spare Tires & Extra Parts, Automatic Transmission, Hydraulic Brakes, Operation & Parts Man. (Click Here to See Ropco Crane Under Power - To be sold via photo, located in San Luis Obispo, CA - CALL AMY AT 818-508-7034 FOR INSPECTION)

SHEARS
12' x 3/16" CINCINNATI Mdl: 1412 POWER SHEAR, Equipped w/ Rear Operated Manual Back Gauge, Foot Treadle, Auto lube System, Square Arm, Material Supports, Dual Counter Balance 18" Throat, 7.5 HP
(2002) 12' x 1/4" CINCINNATI 250HS HYDRAULIC POWER SHEAR, Equipped w/ Front Operated Power Back Gauge w/Indicator, Power Rake Angle Adjustment Control, Power Length of Stroke Control, Square Arm, Front Material Supports, Oil Cooler, Auto Lube System, Electric Foot Pedal, 25 HP, Strokes Per Minute: 65 Short Stroke, 28 Long Stroke, Dimensions (L x W x H), 196" x 90" x 75", s/n: 52377, (To be sold via photo • located in Branchburg, NJ • CALL AMY AT 818-508-7034 FOR INSPECTION) 

BANDSAWS
30" YATES AMERICAN VERTICAL WOOD BANDSAW, 5 hp
(1986) 16" AMADA Mdl: HA-400 AUTOMATIC HORIZONTAL BANDSAW, s/n 40600683, 7.5 hp, Equipped w/ Variable Speed, Chip Auger & Hyd. Vise & Coolant System
(1981) 16" AMADA Mdl: HA-400 AUTOMATIC HORIZONTAL BANDSAW, s/n 40600282, 7.5 hp, Equipped w/ Variable Speed, Chip Auger, Hydraulic Vise & Coolant System
(1986) 12" AMADA Mdl: HA-250 AUTOMATIC HORIZONTAL BANDSAW, s/n 459195, 3 hp, Equipped w/ Variable Speed, Coolant System, Hyd. Vise

COIL REELS
10,000 LBS. X 10" W COIL REEL, 30/40 hp, Equipped w/ Variable Speed, SABINA DC Drive, Back Plate & Manual Expansion
6,000 LBS. X 24" W AMERICAN Mdl: 1000 COIL REEL, Equipped w/ Variable Speed, Back Plate & Manual Expansion
2,500 LBS. X 8" W TISHKEN COIL REEL, Equipped w/ Back Plate & Manual Expansion
2,500 LBS. X 6" W TISHKEN COIL REEL, 5 hp, Equipped w/ Back Plate & Manual Expansion

CRANES
20-TON BEDFORD OVERHUNG CRANE, 50' Bridge, Equipped w/ Pendant Control
15-TON ARROW CRANEHOIST OVERHUNG CRANE w/ 20-Ton Lifting Hook, s/n 12680-1, 50' Bridge, Equipped w/ pendant Control, NOTE: Late Removal
(2) 2-TON C & M JIB CRANES, 15' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON C & M JIB CRANE, 12' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON COFFING JIB CRANE, 12' Arm, Equipped w/ Electric Hoist & Pendent Control
2-TON CLEVELAND TRAMRAIL JIB CRANE, 20' Arm, Equipped w/ Electric Hoist & Pendant Control

MATERIAL HANDLING
23,700 LBS. HYSTER Mdl: H2550E DIESEL FORK LIFT TRUCK, s/n B7P-7885U, w/Dual Front Tire & Side Shift
15,000 LBS. HYSTER Mdl: S100XL PROPANE FORK LIFT, s/n D004D09133X, Equipped w/Cascade Side Shift
(1995) 14,700 LBS. HYSTER Mdl: S155XL PROPANE FORK LIFT, s/n B024D03491S, Equipped w/ Side Shift, NOTE: Late Removal
(2002) 9,100 LBS. HYSTER Mdl: S120XM PROPANE FORK LIFT, s/n E004V01678Z
8,850 LBS. HYSTER Mdl: S80XL PROPANE FORK LIFT, s/n D004V02635K
8,000 LBS.TOYOTA Mdl: 52-6FGCU35 PROPANE FORK LIFT, s/n 60547, Equipped w/ Side Shift
8,000 LBS.TOYOTA Mdl: 52-6FGCU35 PROPANE FORK LIFT, s/n 61368, Equipped w/ Side Shift
6,000 LBS. BRANER MOTORIZED COIL UPENDER 
500 LBS. ALTITUDE ELECTRIC MAN LIFT w/ BATTERIES, 29" x 32" Platform

SHOP EQUIPMENT
50-Ton Carolina H Frame Hydraulic Press16 Gallon Rigid Vacuum, 6.5 hp • 7' X 6' Steel Loading Table 16" Marvel Hacksaw20,000 Lbs. Martin Decker Portable Lifting ScaleSteam Cleaner, Kerosene Fired Apache DC Arc Welder, 175 Amp, 11 hp Briggs & Stratton Motor • 6" X 9" Dayton Belt & Disc Sander, 3/4 hp • Wright Line Utility Cabinet With DrawersOxy Torch Set20" Dayton Floor Drill Press, 1 hp • 6000 Lbs. Carolina Cherry Picker(2006) 3-Ton Rival Mdl: Rvsl 600 Sheet Lifter20 hp Kellogg-American Air Compressor 80 Cfm Arrow Refrigerated Air Dryer(2003) Compair Air Dryer120 Gallon Vertical Airtank 36" Yates American Vertical Wood Saw16" Dewalt Radial Arm Saw w/ Dust Collector

MISCELLANEOUS
Nailers, Bench Grinder, Chain, Motors, Light Bulbs, Gas Cans, Saws, Pressure Gauges, Batteries, Hand Grinders, Hand Drills, Staple Guns, Drill Bits, Grease Guns, Blower Vac, Hand Staplers, Electrical Relays, Bearings, Oil Seeals, Wrenches, C-Clamps, Wire Cutters, Tool Boxes, Battery Charger, Bench Vise, Ladder, Fans, Etc

Registration Info:

INSTRUCTIONS TO BID
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
INTERNET BIDDERS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned
   spending amount or a $2,500 Minimum Deposit in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.
ONSITE BIDDERS
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit
   or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company
   check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days ***

   PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON.
PROXY BIDDERS
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE
   TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order
   to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only.

Payment Info:

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%
ONSITE: 15%

***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***

Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks
MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE

*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.

Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.

PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!

Removal Info:

  • Removal dates: TBA
  • Removal times 8:00 AM - 4:00 PM Monday through Friday.
  • No items released until payment is received in full.

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.