32/86" x 96" Norton Mdl: 32/86 x 96 Gap Bed Strut Cylindrical Grinder
Manufacturer: Norton
S/N: 25204
Specifications:
Capacity:
Swing Over Table: 32"
Swing in Gap: 86"
Maximum Swing in Gap: 89"
Distance Between Headstock and Footstock::
Gap Open: 96"
Width of Gap Open Adjustable To: 38"
Table Bed Swivel Graduated To An Angle Of:
Away From Wheelhead 10 Minutes
Towards Wheelhead 10 Minutes
Wheelhead Carriage Traverse Grinding Rate: Infinite
Headstock:
Live Spindle
Number of Work Rotation Speeds: Infinite
Range of Work Speed: 8 to 100 RPM
Headstock Adjustment Left/ Right on Rack Driven by: Hand
Footstock:
Adjustment Left/ Right On Tabel Rack Driven By Hand: 14 1/2"
Grinding Wheel (Diameter x Face x Hole): 30" x 3" x 9"
Motor Drives: Wired 440 Volts 3 Phase
Wheelhead: 20 H.P. 240/440 Volt A.C.
Headstock (Work Spindle) Infinitely Variable: 3 H.P. 240 Volt D.C.
Table Table Carriage Drive Infinitely Variable: 3 H.P. 240 Volt D.C.
Oil Pump: 1/4 H.P. 240/440 Volts A.C.
Coolant Pump: 1/2 H.P. 220/440 Volts A.C.
Equipped With:
AC to DC Colt Converted by Two Motor Generators Located Within Control Cabinet
Wheel Start/ Stop Buttons
Oil Pump Start/ Stop Buttons
Coolant Pump Start/ Stop Buttons
Rheostat To Control Work
Rheostat To Control Truing
Rheostat To Control Grind
Work Stop and Jog Buttons
Table Start/ Stop Buttons
Table Jog Button
Table Swell On and Off Switch
Rheostat True/ Grind Switch
1 Grinding Wheel Hub
1 Chuck 19" Diameter with Four 2- Piece Reversible Top Jaws
Misc. Splash Guards
Complete Factor Safety Guards
SURPLUS TO MAJOR AEROSPACE COMPANY: NORTON GAP BED STRUT CYLINDRICAL GRINDER
32/86" x 96" Norton Mdl: 32/86 x 96 Gap Bed Strut Cylindrical Grinder
Manufacturer: Norton
S/N: 25204
Specifications:
Capacity:
Swing Over Table: 32"
Swing in Gap: 86"
Maximum Swing in Gap: 89"
Distance Between Headstock and Footstock::
Gap Open: 96"
Width of Gap Open Adjustable To: 38"
Table Bed Swivel Graduated To An Angle Of:
Away From Wheelhead 10 Minutes
Towards Wheelhead 10 Minutes
Wheelhead Carriage Traverse Grinding Rate: Infinite
Headstock:
Live Spindle
Number of Work Rotation Speeds: Infinite
Range of Work Speed: 8 to 100 RPM
Headstock Adjustment Left/ Right on Rack Driven by: Hand
Footstock:
Adjustment Left/ Right On Tabel Rack Driven By Hand: 14 1/2"
Grinding Wheel (Diameter x Face x Hole): 30" x 3" x 9"
Motor Drives: Wired 440 Volts 3 Phase
Wheelhead: 20 H.P. 240/440 Volt A.C.
Headstock (Work Spindle) Infinitely Variable: 3 H.P. 240 Volt D.C.
Table Table Carriage Drive Infinitely Variable: 3 H.P. 240 Volt D.C.
Oil Pump: 1/4 H.P. 240/440 Volts A.C.
Coolant Pump: 1/2 H.P. 220/440 Volts A.C.
Equipped With:
AC to DC Colt Converted by Two Motor Generators Located Within Control Cabinet
Wheel Start/ Stop Buttons
Oil Pump Start/ Stop Buttons
Coolant Pump Start/ Stop Buttons
Rheostat To Control Work
Rheostat To Control Truing
Rheostat To Control Grind
Work Stop and Jog Buttons
Table Start/ Stop Buttons
Table Jog Button
Table Swell On and Off Switch
Rheostat True/ Grind Switch
1 Grinding Wheel Hub
1 Chuck 19" Diameter with Four 2- Piece Reversible Top Jaws
Misc. Splash Guards
Complete Factor Safety Guards
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
All Internet bidders must provide a WIRE TRANSFER DEPOSIT of approximately 25% of your planned spending amount or a $2,500 Minimum Deposit in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
| ONSITE BIDDERS |
|
Registration is available onsite. *** All onsite bidders must provide a $500 cash minimum registration deposit or 25% of approximate bid amount (whichever is greater) via wire transfer, cashier's check or company check accompanied by a bank letter of guarantee prior to the auction. PLEASE NOTE: Check must be guaranteed for 30 days *** PAYMENT IS DUE IN FULL THE FOLLOWING DAY BY NOON. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
|
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER or a $2,500 MINIMUM DEPOSIT with BIDITUP AUCTIONS WORLDWIDE, INC. in order to be approved to bid. |
| Those who do not post the deposit will not be approved. NO EXCEPTIONS! |
| PLEASE EMAIL [email protected] FOR WIRE TRANSFER INFORMATION. |
| There is a $30 incoming wire fee and $50 outgoing wire fee applied to final payments only. |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
ONSITE: 15%
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
3. Corporate check* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
4. Personal and company checks* MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
