Global Online Auction
NO LONGER REQUIRED IN THE ONGOING OPERATIONS OF AMERICAN MEAT EQUIPMENT: MATTISON ROTARY SURFACE GRINDER, BIG RED FORK LIFT, FELLOWS & CHURCHILL GEAR EQUIPMENT, FABRICATION, MACHINE SHOP, PLANT SUPPORT & MAINTENANCE EQUIPMENT
Starts: Tuesday, June 9, 2015 - 10:00am (CST)
Ends: Tuesday, June 16, 2015 - 10:00am (CST)
||Global Online Auction
||640 Mulberry Ave, Selmer, TN 38375
No Longer Required In The Ongoing Operations Of American Meat: Mattison Rotary Surface Grinder, Big Red Fork Lift, Fellows & Churchill Gear Equipment, Fabrication, Machine Shop, Plant Support & Maintenance Equipment
48" Mattison Rotary Surface Grinder • 30,000 lbs. Big Red Model Y-30 Fork Lift • Fellows & Churchill Gear Equipment • Fabrication & Machine Shop • Oliver, Wadkins & Buss Woodworking Machines • Plant Support & Maintenance Equipment Including: Stone Champion Mdl: 95CM Tow Behind Gas Operated Cement Mixer & Multi Quip Mdl: SP2 Walk Behind Concrete Saw • & Much More
Mattison Rotary Surface Grinder, 48" Diameter Magnetic Chuck, 460 Volt 3 Phase With Barnes PE23 Filter Tank
Sheffield Mdl: 110 OD Grinder 16" Wheel, 460 Volt 3-Phase
Pratt & Whitney Mdl: 2E Universal Precision Hole Grinder, Sony Control & 460 Volt 3 Phase
Big Red Mdl: Y-30-WO 30,000 Lbs Fork Lift Truck, Diesel Motor, 114" From Ground To Top Of Mast, Two Speed, Air Brakes & Outdoor Solid Tire
Lees-Bradner Mdl: 12HD Thread Mill
GEAR HOBBERS, SHAPERS & SHAVER
Churchill Rigid Mdl: S 815 Gear Hobber, CGM Control & 480 Volt 3 Phase
Red Ring Gear Shaver, 460 Volt 3 Phase
Fellows Mdl: Type 7A Gear Shaper, 2 Button Control & 460 Volt 3 Phase
Fellows Mdl: Type 7125 Gear Shaper, 2 Button Control & 460 Volt 3 Phase
CRANES & HOISTS
Arrow Crane 3-Ton Bridge Crane With Span, Rails & Post (Does Not Include Extra I Beams Only Hoist, Bridge, Uprights & Rail)
Ingersoll-Rand Air Hoists & (2) Chain Falls
Chisolm Moore Hoist With 6 Button Pendant Control
INJECTION MOLDING MACHINE
Kawaguchi Mdl: KC-70 Injection Mold Machine, 70 Ton Capacity, 72 " Shot Volume 20800 Psi Injection Pressure, With Conair Hopper & C-50 Air Dryer, Bredaryd Granulator & 220 Volt 3 Phase Control Panel
WOOD WORKING EQUIPMENT
Oliver Mdl: #66 Wood Lathe, Tailstock Tool Rest
Oliver Mdl: #13 Universal Pattern Miller, Rotating 24" X 24" Table, 12" Vertical Head Travel, 230 Volt 3-Phase
Oliver Mdl: 12CD Planer & Jointer, With Sharpener, 24" X 96" Table & 230 Volt 3-Phase
Buss Mdl: #44 Planer, Woods Motor, 44" Width, Adjustable Pressure, Button Control, 460 Volt 3-Phase
GROB Vertical File Machine 175 Fpm Max Speed
Oliver Mdl: #173 Jig Saw, 34" X 34" Tilt Table, 48" Throat & 230 Volt 3-Phase
Crescent Tilt Head Bandsaw, 0 - 90 Degree Tilt Back, 48" Throat, Belt Drive, Baldor 10 Hp Motor, 230/460 Volt 3-Phase
Wadkins Mdl: PP610 Table Saw 44" X 51" Table Adjustable Tilt Fence & 460 Volt 3-Phase
Rockwell Mdl: MX2 Radial Arm Saw, 24" Travel, Adjustable Angle Head & 230 Volt 3-Phase
DeWalt Mdl: 3576 Radial Arm Saw, 16" Diameter Blade, 36" Travel, Adjustable Angle Head, 230 Volt 3-Phase
Belt Sander 8" Belt, 6" Length, Work Tables On Both Sides & Curved End Table With Adjustable Height, 460 Volt 3-Phase
Kindt Collins Mdl: #8 Disk Sander With 48" X 16" Tilt Table & 30" Disk & 230 Volt 3-Phase
Starman Spindle Sander, 24" X 24" Table, Baldor Motors Dust Collector
TOOL ROOM EQUIPMENT
60-Ton Niagara Mdl: 7676-2H A-4 OBI Punch Press
Buffalo Iron Worker, Shear, Punch & Bar Cutter
Whitney Jenson Mdl: AR231 Punch, Foot Pedal Control With Tooling
Oliver Mdl: 72-DR Drill Press 24" X 24" Table, 220 Volt 3-Phase, Table & Drill Head Crank
Chicago Pneumatic Mdl: CP-797 Impact Wrench, 1" Drive, 90 Psig
Stone Champion Mdl: 95CM Tow Behind Gas Operated Cement Mixer, 8 Hp Intec Pro Briggs & Stranton Motor & 95 Cubic Feet Drum
Multi Quip Mdl: SP2 Walk Behind Concrete Saw, Honda 13 Hp Gas 4 Stroke Motor, 18" Diamond Blade With Spare & Dust Control Reservoir
Greenlee Mdl: #800 Lightweight Hydraulic Bender, One Shot 1/2"Thru 2" With Bending Shoes In Case
Milwaukee Mdl 4099 "Dymodrill" Core Drill, 3/4 To 7" Capacity, With Vacuum Pump, 30" Depth Max, 120 Volt, 20 Amp Motor
Ridgid Ratcheting Handle With Reamer & 1" Drive Head Extensions
Ridgid Mdl: #44 4-Wheel Pipe Cutter From 2" Thru 4" Capacity
Wayne Air Compressor, 25 Hp Lincoln Motor 3- Cylinder Compressor, 460 Electric 3-Phases
BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS
All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE.
DEPOSIT REQUIREMENTS FOR ONSITE BIDDERS:
IF YOU ARE BIDDING ON-SITE PLEASE DO NOT REGISTER ONLINE!!
Registration is available onsite the day of the sale. ***All onsite bidders must provide 25% of approximate bid amount which will allow a buyer to spend 4 times the deposited amount the day of the sale. $500 cash minimum is required which will only allow a maximum spending amount of $2,000. Acceptable forms of payment for ON-SITE are via:
2. Wire Transfer: Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing
3. Cashier's Check: Made out to Biditup Auctions Worldwide, Inc.
4. Blank Company/Corporate Checks: For deposit only with valid driver's license, matching business card & BANK LETTER OF GUARANTEE. Checks will be given back at the end of the sale if buyer is not a successful bidder OR if successful bidding the checks will be returned after BIU receives a cashier's check or wire transfer for final payment.
DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS:
Minimum: $2,500 required which allows a spending limit of $10,000.
If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent)
Example: $5,000 deposit = allows up to $20,000
You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above.
Forms of payment for deposits accepted online:
1. CASHIER'S CHECK made out to Biditup Auctions Worldwide, Inc. and delivered to our office prior to the sale 11426 Ventura Blvd, 2nd Floor, Studio City, CA 91604
2. WIRE TRANSFER . Please contact our office for current wire information 818.508.7034 or email wire instruction request to firstname.lastname@example.org.
We no longer accept company checks for online bidding with bank letter or credit cards, NO EXCEPTIONS.
Preferred Buyers: **As a courtesy to members of the Machinery Dealers National Association (MDNA) deposit requirements are waived and verified members will be approved to bid up to $20,000 without deposit. Please provide us with your MDNA number, a copy of your business card, drivers license and email for verification. If planning on bidding over $20,000 please wire transfer the entire amount you anticipate exceeding or you will be prohibited from bidding beyond the $20,000.
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU
ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID
ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS.
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
There is a $30 incoming wire fee and $45 outgoing wire fee applied to final payments only.
All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE.
All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE, INC. with a $2,500 MINIMUM DEPOSIT in order to be approved to bid.
Those who do not post the deposit will not be approved. NO EXCEPTIONS!
PLEASE EMAIL WIRETRANSFER@BIDITUP.COM FOR WIRE TRANSFER INFORMATION.
* All Items Subject to Seller's Acceptance of Online Bids *
***Please fax resale certificates to Biditup Auctions (818.508.3025) prior to bidding.***
Acceptable Payment Methods:
2. Cashier's Check
3. Wire Transfer
4. Corporate/Company Check *MUST BE ACCOMPANIED WITH BANK LETTER OF GUARANTEE
*Acceptable at the Auctioneer's sole discretion. Must be accompanied with a bank letter of guarantee from company's bank guaranteeing unqualified payment to Auctioneer.
Auctioneer must approve all payment methods prior to bidding. The Auctioneer reserves the right to determine the validity of all cashier checks and letters of guarantee.
PLEASE NOTE: WE DO NOT ACCEPT CREDIT CARD PAYMENTS. NO EXCEPTIONS!
Removal dates: TBA
Removal times 8:00 AM - 4:00 PM Monday through Friday.
No items released until payment is received in full.
Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.