EAGLE 1,000-TON PRESS LINE CONSISTING OF:
• Eagle Mdl. SE44-1000-228-78, 1,000-Ton Eccentric SSDC Transfer Press, S/N EP-248-112904 (New 2004), 228" X 78" Bolster, 20" Stroke, 6' Windows, 48" Shut Height, 12" Slide Adj., 15-30 SPM Max. Speed, Wayne Trail Servo Transfer System
• Dallas Mdl. DRFX-872, .125" X 72" Servo Roll Feed, S/N 22154
• Dallas Mdl. PTS-4-7-72-5T, .125" X 72" Straightener, S/N 22155
• Dallas Mdl. DSLT, 40,000 Lb. X 72" Od Coil Car, S/N 22151, W/Power Elevation

VERSON 1,000-TON PRESS LINE CONSISTING OF:
• Verson Mdl. S4-1000-168-72, 1,000-Ton Eccentric SSDC Transfer Press, S/N 28419 (New 1986, Rebuilt 2016), Linear Servo Transfer System, 72" Windows, 168" X 72" Bolster, 16" Stroke, 16" Slide Adj., 44" Shut Height, 0-45 SPM Max. Speed (Built 1986)
• Littell Mdl. 750DLC, 48" W Press Servo Roll Feed, S/N 88291-86 (1986), W/Pit Mounted Threading Table
• Littell Threading Table
• Littell Mdl. 850-7PD, .185" X 46" W 3 Over 4 Roll Coil Straightener, S/N 88294-86 (1986), W/Peeler Table, Power Hold Down
• Littell 30,000 Lb. X 72" W Single End Uncoiler, S/N 88295-86 (1986), W/Hyd. Mandrel Expansion, Traveling Coil Car

MINSTER 600-TON PRESS LINE CONSISTING OF:
• Minster Mdl. E600-144-60, 600-Ton SS Transfer Press, S/N 30276 (2004), 30" Windows, 144" X 60" Bolster, 25-50 SPM Max. Speed, 47" Stroke, 12" Slide Adj., Air Clutch And Brake, Air Counterbalance, Wayne Servo Transfer System, Exit Conveyors
• Minster Mdl. MEF7-50S, 50" Servo Press Feeder, S/N 13-51161
• Minster Threading Table, W/Laser Loop Detection
• Minster 50" W X 11,000 Lb. 4 Over 3 Coil Straightener, S/N 13-50766, W/Loop Support, Peeler Table, Power Hold Down Roll, Air Actuated Pinch Rolls
• Minster Mdl. MRH30-50S, 50" W X 72" Od X 30,000 Lb. Uncoiler, S/N 13-70895
• Littell Mdl. 90-30, 30" X 60" X 10,000 Lb. Single End Mortised Uncoiler, S/N 83141-78

MINSTER 600-TON PRESS CONSISTING OF:
• Minster Mdl. E2-600-120-60 600-Ton SSDC Press, S/N 29519 (1998), W/120" X 60" Bolster, 14" Stroke, 47" Shut Height, 6" Slide Adj., 0-60 SPM Max. Speed, 52" Windows
• Perfecto 40" W Servo Roll Feed, W/Threading Table
• Magnetic Scrap Conveyor System
• Mecon Mdl. 38-40-7, .105" X 40" OD 3 Over 4 Roll Straightener, S/N 83406, W/Loopo Support Pettler Table, Power Hold Down Roll
• Perfecto Mdl. RS-20-40-R, 20,000 Lb. Single End Uncoiler, S/N 83047, W/Traveling Coil Car, W/Power Elevation

AIDA 600-TON PRESS LINE CONSISTING OF:
• Aida Mdl. A1-600, 600-Ton Ssdc Press, S/N 12906-0770 (1999), 11.81" Stroke, 27.55 Die Height Over Bolster, 25-60 SPM, 120" X 55" Bolster, 24" X 30" Windows, 12" Portable Scrap Conveyor
• Perfecto 600-42EF Coil Straightener, S/N EF87181, W/Pit Mounted Threading Table
• Sesco Mdl. 52.223, 4 Over 5 Coil Straightener, S/N 18043
• Sesco Mdl. 55-507 Uncoiler, S/N 18040-1

STAMTEC 300-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. S2-300, 300-Ton SSDC Press, S/N S60495 (1997), 98.5" X 55" Bolster, 30-70 SPM Max. Speed, 10.03" Stroke Length, 26" Shut Height, 8.27" Slide Adj.
• Perfecto Mdl. 500-30, 30" Servo Press Feeder, S/N 96029, W/Threading Table
• Perfecto Mdl. 28-30-07STR Coil Straightener, S/N 96028
• Perfecto Mdl. RS207230, 30" 20,000 Lb. Coil Straightener, S/N 96027, W/Coil Cradle

STAMTEC 275-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. G2-250, 275-Ton Cap. Gap Frame Press, S/N S60496 (1996), 6.69" Stroke, 30-60 SPM, 4.72" Slide Adj., 106.29" X 35.43" Bolster
• Perfecto Mdl. 500-34 Servo Press Feeder, S/N 96030, W/Threading Table
• Coe Mdl. CPS30 3 Over 4 Roll Coil Straightener, S/N 11310, W/Pinch Rolls, Loop Support, Peeler Table, Power Hold Down Roll
• Perfector / Feintool Mdl. 150-30 Uncoiler, S/N PR434134

STAMTEC 200-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. S2-200, 200-Ton SS Press, S/N S90968 (1999), 50-120 SPM Max. Speed, 5.91" Stroke, 5.91" Slide, 96" X 36" Bolster, 24" X 20" Windows, Light Curtains
• Cwp Mdl. Servo Max Ii Press Feeder, W/Threading Table
• Cooper Mdl. SE240, 3 Over 4 Coil Straightener, S/N C6531
• Cooper Mdl. 4.5r-24, 24" X 10,000 Lb. Uncoiler, S/N C6530

STAMTEC 200-TON PRESS LINE #2 CONSISTING OF:
• Stamtec Mdl. S2-200, 200-Ton SS Press, S/N S80853 (1999), 40-80 SPM Max. Speed, 5.91" Stroke, 5.91" Slide Adj., 17.73" Shut Height, 72.84" X 49.21" Bolster, 24" X 20" Windows, Light Curtains
• Vamco Mdl. CFS-14LL, 14" Servo Press Feeder, S/N 2.51214PVPCL148
• Littell Mdl. 212-17PDL Coil Straightener, S/N 76553-68 (1968)
• Littell Mdl. 40-18, 18" X 4000 Lb. Uncoiler, S/N 80530-74 (1974)

STAMTEC 176-TON PRESS CONSISTING OF:
• Stamtec Mdl. G1-160-S, 176-Ton Single Point Gap Frame Press, S/N 0207 (1996), 8" Stroke, 40 SPM Max. Speed, 17.7" Shut Height, 3.94" Slide Adj., 49.21" X 31.5" Bolster, Smart Pack Control
• Mdl. 2.5-12/14, 12" Press Feeder, S/N 2.51214YEACPXL13R
• Littell Mdl. 212.17PD Coil Straightener, S/N 82856-77-4
• Littell Mdl. 40-18 Uncoiler, S/N 1173-75

AIDA 175-TON PRESS LINE CONSISTING OF:
• Aida Mdl. NC2-1600-2, 175-Ton DC Gap Frame Press, S/N 10516-1067 (1985), 7.87" Stroke, 30-55 SPM, 17.72" Shut Height, 80" X 30" Bolster
• Vamco Mdl. CPF-S1-12, 12" Servo Press Feeder, S/N 69837, W/Coe Servomaster Control
• Littell Mdl. 2122-70PD, 12" Coil Straightener, S/N 73407-64
• American Steel Mdl. 7587 1000 Lb. Uncoiler, S/N 12716

STAMTEC 150-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. S2-150, 150-Ton SS Press, S/N 134 (1987), 60" X 36" Bolster, 5" Stroke, 60-100 SPM, 4" Slide Adj.
• Vamco Mdl. Servo CFS-14LL, 14" Press Feeder, S/N 2.51214PVPCL166
• Littell Mdl. 21217PD, 12" Coil Straightener, S/N 74313
• American Steel Mdl. 60-4000 Uncoiler, S/N 7481 (1985)

AIDA 121-TON PRESS LINE CONSISTING OF:
• Aida Mdl. NC1-11C25, 121-Ton Gap Frame Press, S/N 00211-6025 (1985), 7.08" Stroke, 24" Slide Adj., 2" X 27" Bolster, 35-65 SPM
• Cwp Mdl. Servo Max II, 12" Servo Press Feeder, S/N 801465
• Littell Mdl. 212-17PD Coil Straightener, S/N 80289-75
• Pem Welder, S/N 40
• Littell Mdl. 40-12 Uncoiler, S/N S-1658-7
• Dillon Mdl. Fl-127, 20,000 Lb. Cap. Bench Top Force Tester, W/10" Between Posts, 18" Shut Height

STAMTEC 110-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. C1-110S, 110-Ton Open Back Gap Frame Press, S/N 02060 (1990), 45" X 23" Bolster, 7.09" Stroke, 30-60 SPM Max. Speed, 19-7/8" Shut Height, 8" Vibratory Bowl Feeder, Light Curtains, Smart Pack Pro Controls
• Vamco Mdl. CFS-14, 14" Press Feeder, S/N 2.51214YEPXL54L
• Littell 12" Coil Straightener, S/N 77748-69
• American Steel Line Mdl. 60 Uncoiler, S/N 9378

STAMTEC 60-TON PRESS LINE CONSISTING OF:
• Stamtec Mdl. G1-60, 60-Ton SC Gap Frame Press, S/N S6049 (1996), Smart Pack Controls, 4.728" Stroke, 35-90 SPM Max. Speed, 11.82" Shut Height, 35.5" X 19.75" Bolster
• Vamco Mdl. E/CFS-6, 6" Press Feeder, S/N E.2.5461PCL11

FANUC WELDING CELL (2013) CONSISTING OF:
• Emhart Mdl. DCE1500 Stud Welder, S/N 09/250858001005, 12" Vibratory Bowl Feeder
• Fanuc S-430IF Robot, W/RJ3 Control And Teach Pendant
• Koolant Koolers Dimplex Thermo Solutions 5-Hp Chiller
• Schmidt Stud Welder
• Safety Cage

FANUC WELDING CELL (2000) CONSISTING OF:
• Dengensha Stud Welder
• 12" Vibratory Bowl Feeder
• Emhart Parts Feeders
• Fanuc S-430IF Robot, W/RJ3 Control And Teach Pendant
• Kooland Koolers 5-Hp Chiller
• (2) Schmidt Stud Welders
• Safety Cage

FANUC WELDING CELL CONSISTING OF:
• Dengensha Dual Head Stud Welder, W/Vibratory Bowl Feeder And Emhart Parts Feeder
• Fanuc S-430IF Robot, W/RJ3 Control And Teach Pendant
• Dual Head Stud Welder

2-STATION WELDING CELL CONSISTING OF:
• PLC Control
• Lincoln R350 Powerwave Welding Power Source
• Fanuc 6-Axis Robot, W/RJ3 Control

2-STATION WELDING CELL (1997) CONSISTING OF:
• Fanuc Arcmate 100I Welding Robot, W/RJ2 Control, S/N E97X05509 (1997)
• Lincoln Powerwave 450 Welding Power Source

2-STATION WELDING CELL CONSISTING OF:
• Fanuc Arcmate 100I Welding Robot, W/RJ3 Control
• Lincoln 100I R350 Powerwave Source

FANUC WELDING CELL CONSISTING OF:
• Fanuc S420IW Spot Welding Robot, W/RJ2 Control, S/N E98700205 (1998)
• Light Curtains

2-HEAD SPOT WELDING SYSTEM CONSISTING OF:
• (2) Technitron Series T2050 Controls
• (2) Roman 85-KVA Power Sources

WATER COOLED FRAME PEM WELDING CELL CONSISTING OF:
• Light Curtains, 2-Head Water Cooled Spot Welder
• WTC Mdl. WT530 Control
• (2) Roman 85-KVA Power Sources
• Operators Interface

6-HEAD WATER COOLED FRAME WELDING CELL CONSISTING OF:
• Light Curtains
• PLC Control
• Grossel Welding Heads
• (2) Roman 150-KVA Welding Power Sources

FRAME PEM WELDING CELL CONSISTING OF:
• (2) Technitron Series T2050 Controls
• Miller Coolmate Chiller
• (2) Roman Power Sources
• Pneumatic Parts Feeder, W/12" Vibratory Bowl
• Light Curtains

A-FRAME PEM WELDING CELL CONSISTING OF:
• 4-Head Water Cooled Welder
• Allen Bradley Panel View 550 Control
• (2) Roman 120-KVA Welding Power Sources
• Weldtronic Mdl. WT900 Control

A-FRAME WATER COOLED FOREHEAD WELDING CONSISTING OF:
• PLC Control, Light Curtains
• (2) Roman Welding Power Sources

ROBOTIC TIG PEM WELDING CELL CONSISTING OF:
• Fanuc Arcmate 100I Welder, W/RJ2 Control
• Light Curtains
• Miller Syncrowave 250 Welding Power Source

2-STATION ROBOTIC WELDING CELL CONSISTING OF:
• Lincoln R350 Powerwave Welding Power Source
• Fanuc Arcmate Robot, W/RJ3 Control

(2) 2-STATION ROBOTIC WELDING CELLS CONSISTING OF:
• Fanuc Arcmate Welding Robot, W/RJ3 Control
• Lincoln R350 Powerwave Welding Power Source

A-FRAME 2-HEAD WATER COOLED SPOT WELDER CONSISTING OF:
• Plc Control, Light Curtain
• (2) Roman 100-KVA Power Sources

2-STATION ROBOTIC WELDING CELL CONSISTING OF:
• Fanuc 100IB Welding Robot (2005), W/RJ3 Control, S/N E04502906 (2004)
• Lincoln Powerwave 455M Welding Power Source (2005)
• Allen Bradley Panelview 700 Plus PLC Control
• Fume Collector

ROBOTIC WELDING CELL CONSISTING OF:
• Allen Bradley Panel View 600 Control
• Daihen Mdl. ALMEGAEV-V6 6-Axis Robot
• Assembly Fixture
• Daihen Mdl. EXCMN-1-R000 Robot Control, S/N L8300Y25158220 (2001), W/Teach Pendant
• Daihen Mdl. EXCMN-1-R000 Control, S/N CPDTAS-501 (2001)

2-STATION ROBOTIC WELDING CELL CONSISTING OF:
• Fanuc 100IB Welding Robot (2005), W/RJ3 Control, S/N E05403045 (2005)
• Lincoln Powerwave 455M Welding Power Source (2005)
• Allen Bradley Panelview 700 Plus PLC Control
• Fume Collector

2-STATION ROBOTIC WELDING CELL (2003) CONSISTING OF:
• (2) Fanuc R2000IA Welding Robots (2003), Each W/RJ3 Controller, S/N's E03300258 & E02600055
• (2) Obara Welding Power Supplies
• Custom 2-Position Rotary Table, W/Parts Fixtures
• Allen Bradley Proface Touchscreen CNC Control
• Cage Enclosure

DUAL ROBOT INDEXING SPOT WELDING CELL CONSISTING OF:
• (2) PLC Controls
• (2) Fanuc S420IW Robots, S/N's E99601824 & E99803752
• (2) Centerline Welding Heads
• (1) 8' Rotary Table And (2) RJ2 Controls (1999)

TOYOTA COUNSEL SUN ASSEMBLY CELL CONSISTING OF:
• (2) Fanuc S430I Robots E99Y04186 & E98800025
• (2) Obara Welding Heads
• (3) Spot Welders
• (3) Sekikogyo Parts Feeders

ASSEMBLY CELL CONSISTING OF:
• (2) Tox Pressotechnik Hyd. Crimping Machines, S/N's 161239.11 & 161239.13
• Custom Designed Fixtures
• (2) Overhead Light Duty Manual Hoists

ASSEMBLY CELL CONSISTING OF:
• Fanuc Arcmate 50I Pick And Place Robot (New 2000)
• Light Curtains
• RJ3 Control
• CVI Desonttor
• (2) Sentinel C28 Test Systems
• PLC Control
• Pneumatic Press
• (2) Koolant Koolers Mdl. SVI-5000-M, 5-Hp Chillers, S/N's 36345 & N/A
• Schriber Mdl. 3000MC-S, 3-Hp Chiller, S/N SC111D
• (3) Koolant Koolers Mdl. KV5000, 5-Hp Chiller, S/N 25185 & (2) N/A
• Koolant Koolers Mdl. SV1-7500W, S/N 38993
• Dimplex Mdl. SV5000-W, 5-Hp Water Chiller, S/N 50239
• Kooland Koolers Mdl. VA3000, 3-Hp Water Chiller, S/N 22176
• Kooland Koolers Mdl. LKV7500, 7-1/2 Hp Water Chiller, S/N 34049
• Kooland Koolers Mdl. KV5000, 5-Hp Water Chiller, S/N 19587
• Econolift Mdl. DOHPT20 Scissor Lift Table, S/N 104656

TOOLROOM
• Mawer Mdl. W20, 2-Head Water Cooled Spot Welder, S/N 3858.05, W/PLC Control, Banner Light Curtains, (3) Roman Power Sources
• Mawer Mdl. W21 Single Head Water Cooled Spot Welder, S/N 3585.06, W/Banner Light Curtains, (2) Roman Power Sources
• Stamtec Mdl. G1-60-2 Open Back Gap Frame Press, S/N 0200 (1989), 11.8" Shut Height, 35-85 SPM Max. Speed, 4.72" Stroke, 2.92" Ram Adj., Light Curtains, Autoset 1500 Load Analyzer
• 2-Head Water Cooled Spot Welder, W/Technitron Series T2075 Control, Miller Coolmate 4 Chiller, (2) Roman Power Sources
• Pemserter Series 2000, 8-Ton Pem Coin Press, S/N 2014A-106, 12" Throat, 12" Vibratory Bowl Feeder, 24" Throat
• Pemserter Mdl. 20000, 8-Ton Pem Coin Press, 12" Throat, 12" Vibratory Bowl Feeder, 24" Throat
• Custom Designed & Fabricated Clip Machine, W/Allen Bradley Panel View PLC Control
• Custom Designed & Fabricated Pneumatic Nut Runner Assembly Cell
• Baltec Mdl. RNL-281-80 Spin Riveter
• Micro-Vu Mdl. M103, 14" Optical Comparator, S/N 5806, W/Microvu 3-Axis Digital Readout
• High Light Industries Mdl. Synergy 1 Spiral Vertical Stretch Wrapper, W/60" Dia. Platform
• Digi Mdl. DC190 Digital Floor Scale, W/48" X 48" Platform
• Lantech Vertical Stretch Wrapper, W/(2) 6' X 6' Roller Conveyors And (1) 6' Roller Table
• Quality Mdl. Custom Designed & Fabricated Cap Nut Installation Machine, Consisting Of PLC Control And Light Curtain
• Banner 2-Head Water Cooled Spot Welder
• GWI Eng. Single Head Water Cooled Spot Welder, W/Syntron 14" Vibratory Bowl Feeder And Roman Power Source
• Banner Mdl. SM1FG085A1 Single Head Spot Welder, S/N 7070, W/WTC Mdl. WT510 Control And Roman Power Source
• Benteler 2-Head Water Cooled Spot Welder, S/N 62, W/Roman Power Source
• Degensha Mdl. NDZ-070-41BLU-R-D, 225-KVA Single Head Water Cooled Spot Welder, W/Wegensha Vibratory Parts Feeder And 15" Throat
• Degensha Custom Designed & Fabricated Single Head Water Cooled Spot Welder, W/Degensha Vibratory Parts Feeder And 15" Throat
• Water Cooled Spot Welder, W/12" & 24" Vibratory Bowls And WTC Mdl. WT500 Control
• Baltec Mdl. RNEL281 Spin Riveter, S/N 281.8695
• Denso Welding Assembly Machine Consisting Of: (2) 14" Vibratory Feeder Bowls, Automation Devices Feeder, S/N 32-534865, 2-Head Water Cooled Spot Welder, WTC Mdl. WT520 Control, Roman Welding Power Source
• Banner Mdl. 1AP75.A1, 75-KVA Single Head Water Cooled Spot Welder, S/N 7220, W/Entron Mdl. EN101 Control And Miller Coolmate 4 Chiller
• Benteler Mdl. 75pt12, 60-KVA Turntable Welder, S/N X1031, W/12" Rotary Table, Light Curtains, WTC Mdl. WT520 Control, Roman 60-KVA Power Source, And Coolmate 4 Chiller
• Quality Machine Inc. Oil Pan Machine Tube Assembly Cell Consisting Of: Fanuc Arcmate 50FL Robot (2000), W/RJ3 Control, Right Hand Test Station, (2) CTS C28 Test Stations, CVI Desontter System, Left Hand Leak Test Station
• Custom Designed & Fabricated Poke/Yoke Machine, S/N EG8-13-12
• Metrotec Single Head Water Cooled Spot Welder, S/N 60, W/Coolmate 4 Chiller, Light Curtains, Roman 100-KVA Power Source
• Custom Designed & Fabricated Alpha Assembly Stand Consisting Of: Atlas Copco Tensor SL Nut Driver, Allen Bradley Panel View 600 Control, And Fixtures
• Custom Designed & Fabricated Test Fixture, W/Banner EZ-Screen Light Curtain And 2-1/2 HP Baldor Motors
• Custom Designed & Fabricated Assembly Fixture, W/Allen Bradley Panel View 600 Control And 2-1/2 HP Baldor Motors
• Barret Mdl. BC21-33 Platform Lift
• Custom Designed & Fabricated Heat Shield Machine, W/(4) Pneumatic Staplers
• Hypertherm Mdl. 900 Powermax Plasma Cutter
• Lincoln Mdl. 225 Precision Tig Welder
• Miller Mdl. Millermatic 250 Welding Power Source, S/N KG412631 (1996)
• Gifford Hill Single Spindle Drill
• Bridgeport Vertical Milling Machine, S/N 128622
• Bridgeport Mdl. 815 Surface Grinder
• Boyar-Schultz Mdl. H612 6" X 12" Manual Surface Grinder
• Robotron Water Cooled Spot Welder, 12" Throat
• Leblond Regal Mdl. 10C, 11" X 43" Engine Lathe, S/N 10C-309-X-4030
• Work-A-Matic Vertical Band Saw, S/N 1294177SXC
• Bridgeport 1-1/2 Hp Vertical Milling Machine, S/N 149477, W/Power Table, Sony Digital Readout, Collet Holder
• Grob Mdl. 4V-18 Vertical Band Saw, S/N 2066
• 6" Disc X 1" Belt Sander
• Double End Grinder
• 6" Belt Sander
• Dayton Mdl. 3Z849 2-Glove Glass Blast Cabinet
• Dura Press Mdl. 425 H-Frame Shop Press, S/N 92409, 27" Between Housings
• Aget Dust Collector, S/N 8390
• American Steel 20,000 Lb. Coil Upender, S/N 9101 (1994)
• Gerref 12" Part Washer, S/N 1417-400
• Gerref Portable Parts Washer, S/N 1491301
• Midbrook Cyclone Parts Washer
• Hurricane Mdl. 50XXB Parts Washer, S/N 42797/4317
• (2) Siat Vertical Stretch Wrappers, S/N's N/A, W/60" Dia. Platform
• Micro-Vu Mdl. H14, 14" Optical Comparators, W/Microvu 16" 2-Axis Digital Readout
• Micro-Vu Mdl. 500HP 14" Optical Comparator, S/N 5148, W/Q16 Digital Readout
• Micro-Vu Mdl. S14, 14" Optical Comparator
• Perfecto Press Feeder
• Perfecto Mdl. 38-40-7, 3 Over 4 Coil Straightener, S/N SS-83046, W/Pit Mounted Threading Table
• Perfecto Mdl. RS20-40 Uncoiler, S/N RS83047, W/Coil Cradle
• Carlton 5' Arm X 11" Dia. Column Radial Arm Drill, S/N 1A-4315
• Roll-In Saw Vertical Band Saw
• Lincoln Mdl. KM20D Single Spindle Drill, S/N 189345B
• Leblond Mdl. Regal 17" Engine Lathe, 60-1000 RPM, 6" 3-Jaw Chuck, 1/2" Spindle Bore
• (2) Bridgeport 1-1/2 Hp Vertical Milling Machines, S/N's N/A, W/Newall Digital Readout
• Bridgeport 1-1/2 Hp Vertical Milling Machine, S/N 278573 (1996), W/Acu-Rite Digital Readout And Power Feed Table
• Dake Mdl. 401A Arbor Press
• Miller Mdl. 33A/BP Welding Power Source
• Jet Mdl. Vbs-1610 Vertical Band Saw, S/N 6021637, W/Welder/Grinder
• Delta Mdl. 52-613, 12" Disc X 6" Belt Sander, S/N 96F03539
• Dake Mdl. 4Z910B Grinder, S/N 9601
• Baldor Mdl. L3406 Sander, S/N W12-94G-5050
• Dust Vent Mdl. 28MC Mist Collector, S/N 13198
• Chevalier Mdl. Accu-Grind 6" X 18" Manual Surface Grinder
• Reid Mdl. 618Hr, 6" X 18" Manual Surface Grinder, S/N 20881
• Reid Mdl. 1804 Manual Surface Grinder, S/N 20730
• Grand Rapids 12" X 24" Hyd. Surface Grinder
• Grand Rapids Mdl. 566, 14" X 36" Hyd. Surface Grinder, S/N 560179
• Leblond Regal 24" Engine Lathe, W/20" 4-Jaw Chuck
• Bridgeport 1-1/2 Hp Vertical Milling Machine, S/N 147967, W/Sargon 2-Axis Digital Readout
• Hyd. H-Frame Shop Press, 48" Between Housings
• Vertical Band Saw, S/N 089098
• Cardinal 5000 Lb. Digital Floor Scale, W/48" X 48" Platform
• Rice Lake Counter Part Tabletop Scale
• Ingersoll Rand Mdl. NVC700A400 Refrigerated Air Dryer, S/N 309310, W/Receiving Tank
• High Light Industries Vertical Stretch Wrapper, W/60" Dia. Platform
• Roll-In Saw Mdl. EF1459 Universal Band Saw, S/N 98224EF
• Miller Mdl. CP250TS Welding Power Source, S/N HE744592
• Protec Mdl. SC74D 14" Cut-Off Saw, S/N 2030063P00
• Tennsmith Mdl. HBU4816, 4' X 16-Ga. Manual Press Brake, S/N 15209
• Ridgid Mdl. 400A Pipe Threader, S/N 409687
• Denison Mdl. T120HC261D215D268A68S210, 12-Ton C-Frame Press, S/N 19306
• (3) Reliable Automation Custom Designed & Fabricated 336-KVA Projection Spot Welders, S/N's 05001-2 & (2) N/A (All 2017), W/WTC Medweld Controller, Allen Bradley Panel View 600 PLC
• Reliable Automation 65-KVA 2-Head Spot Welder, S/N R957416580 (2017), W/(2) Rexroth Power Supplies, Allen Bradley Panel View PLC Control
• UV Light Scan Inspection System
• Keyence Inspection System, W/Operators Interface
• Custom Designed & Fabricated Insertion Cell, W/(2) C-Frame Hyd. Insertion Presses And Operators Interface
• (2) Moonroof Tox Pressotechnik Orbital Riveters, (2003/2004)
• Denso Parts Checker

OVERHEAD CRANES
• Abell-Howe 15-Ton X 44' Top Riding Double Girder Bridge Crane, S/N MC6849301, W/Top Riding Power Hoist, Spreader Bar, Radio Control
• Shaw Box 10-Ton X 44' Top Riding Single Girder Bridge Crane, W/Top Riding Carriage, Pendant Control
• Kone 20-Ton X 44' Top Riding Double Girder Bridge Crane, W/Top Riding Carriage, Radio Controlled
• Harnischfeger Corp. 15-Ton X 44' Top Riding Double Girder Bridge Crane, W/Top Riding Carriage, Radio Control
• Load Lifter 10-Ton X 44' Top Riding Single Girder Bridge Crane, W/Underslung Kone Crane Carriage, Radio Control

QUALITY CONTROL
• Sheffield Cordax Mdl. RS50DCC Coordinate Measuring Machine, S/N A0329, W/Renishaw PH10M Probe
• Wilson Rockwell Mdl. B524-T Digital Hardness Tester, S/N 82603807 (2014)
• Lot Of Misc. Equipment Throughout Quality Control Lab Consisting Of: Leeco Spectrum 1000 Grinder Polisher, Olympus SZX7 Stereo Microscope, BMC Lab Hood, Leeco MSX255M Chop Saw, Wilson Rockwell Series 500 8524-T Hardness Tester, S/N 82603807, Salt Bath Tester, Dayton Air Compressor, Etc

MOBILE EQUIPMENT
• Taylor 40,000 Lb. Forklift Truck
• Toyota Mdl. 5FBC25, 5,000 Lb. Gas Forklift Truck, S/N 61582 (1998), 3-Stage Mast, Side Shift
• Toyota Mdl. 5FBC25, 5,000 Lb. Gas Forklift Truck, S/N 64264 (2000)
• Economy Mdl. BC-2133-2W Aerial Manlift, S/N BK76912
• JLG Mdl. 30HA Boom Manlift, S/N 300016407
• Big Joe Mdl. 9957, 1,000 Lb. Die Cart, S/N 47686
• Economy Mdl. W-60, 1,000 Lb. Die Cart, S/N CA415374A
• Snorkel Mdl. Sl-20, 800 Lb. Scissor Lift, S/N 961136019
• International 26' Stake Truck, VIN 1HTWGADRZEJ07119 (1984)
• Toyota 6BRU23, 4,500 Lb. Cap. Electric Forklift, S/N 30058 (2005)
• Advance Mdl. R32-C, Electric Sit-Down Rider Floor Scrubber, S/N 1954484
• Toyota Mdl. 7FB0U20, 4000 Lb. Cap. LPG Forklift Truck, S/N 63709 (2003)

AIR COMPRESSORS
• Ingersoll Rand Mdl. SSR-EP100, 100-Hp Rotary Screw Air Compressor, S/N CK229U99209 (1999)
• Sullair Mdl. 25-100L, 100-Hp Rotary Screw Air Compressor, S/N 35426-DGH, Air Receiver Tank
• (2) Gardner Denver Mdl. EBMQLE Rotary Screw Air Compressors, S/N's U84428 And U84429
• Kellogg American Mdl. 6030CAH Air Compressor, S/N V9840199/CP
• Ingersoll Rand Mdl. RNC400A4CZ Refrigerated Air Dryer, S/N GD400A460021203
• Ingersoll Rand Mdl. DXR6000 Refrigerated Air Dryer, S/N 99GDXR2033 (1999)

MISCELLANEOUS EQUIPMENT
• Lot Of Misc. Equipment Throughout Production Consisting Of: Battery Chargers, Toro 20" Snow Blower, Coolant Mixing Pumps, Water Recycle Units, PH Tester, Central Vac, Yard King Snow Blower, Shop Dry Vacs, Shop Vacuums, Diaphragm Pumps, Gas Detectors, Pressurized Spray Tanks, Spray Lube Tanks, Rockwell Magnetic Drill, Milwaukee Drills, Makita Hammer Drills, Milwaukee Jig Saws, Rockwell Skill Saws, Power Greasers, Die Carts, Magnetic Conveyors, Staplers, Mini Mover Conveyors, Hyd. Load Tester, Indie Tapping Machines, NCI Mdl. 8250 Scales, NCI Controls, Light Short And Tabletop Scales, Self-Dumping Hoppers, Pallet Jacks, Work Benches, File Cabinets, Refrigerators, Heavy Duty Die Racks, Surface Plates, Height Gages, Tote Lifters, Joboxes, (2) Steel Welded Mezzanines, Magnetic Conveyors, Miller Welders, Etc.
• Lot Of Misc. Equipment Consisting Of: Rocklin Manufacturer Rocklinizer, Hyd. Load Tester, Various Scales, Pallet Jacks, Hand Rivet Tools, Water Distillers, Die Carts, Doane Welder, Vertical 8" Air Press, Turntable Resistance Welder, Screw Inserter, Battery Chargers, Small Water Chillers, Hyd. Load Testers, Check Fixtures, Sort Check Machines, 1/4-Ton Inserters, Screw Guns, Pneumatic Tools, Work Benches, Portable Stairs, Tote Lifters, Acetylene Welders, Electric Pallet Lift, CCC Electric Stapler, Digital Bench Top Scale, Fans, Ladders, Etc.
• Lot Of Misc. Office Furniture And Equipment Consisting Of: Desks, Chairs, Bookcases, File Cabinets, Computers, Routers, Cubicle Dividers, Conference Room Furniture, Break Room Tables & Chairs, Etc.

* All Items Subject to Seller's Acceptance of Online Bids *

BUYER'S PREMIUM

ONLINE: 18%

• Removal dates: All Equipment Must Be Removed By No Later Than June 26th. Stamping Presses & Feed Equipment Last Day Of Removal No Exceptions Is July 3rd. Anything Remaining In The Facility After That Will Be Considered Abandoned With No Exceptions.
• Removal times 8:00 AM - 4:00 PM Monday through Friday.
• No items released until payment is received in full.

Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.