Biaxial Monolayer Polypropylene Annealed Blown Film Extrusion Line
• Polytype Prandi Jumbo OPP 1500/160
• EP160 Extruder (160mm dia.)
• 150mm Max Web Width
• 2100mm Annealer Nip Roll Inlet with Edge Trimmers
• 1000-2000mm 3 Zone Annealing Tunnel Oven
• 2000mm Flame Surface Treater
• (2) 800mm Reel Width Rewinders, 1500mm Max Web Width
• Edge Trim Regrind System
1995 POLYTYPE PRANDI JUMBO OPP 1500/160 ANNEALED BLOWN FILM EXTRUSION LINE
1995 Polytype Prandi Jumbo OPP 1500/160 Annealed Blown Film Extrusion Line: Polypropylene • Biaxial • Monolayer • (1) Horizon Systems Model 6x5 Work Bin Hopper with RFP-2.5 Vacuum Loader • (1) Model EP160 Extruder • with Overhead Feed Hopper • ATFAB Model SVAC-3100 2.5HP Material Vacuum Loader • 160mm Screw Diameter • 105Kw Capacity • 7 Heating Zones • 7 Cooling Zones • 14' Barrel Length • 64.3 Max RPM • 18.3 Gear Ratio • 276Kw ABB Electric Motor • (1) Hitech Model U-M16R-NA-IBW-C-L/R Fully Automatic Continuous Concept Solid State Screen Changer • 3-1/2" Discharge Bore Dia. Model E-C1-0B06-0 Controls • (1) Monolayer Die with (4) 3700W Heating Elements • (1) 190mm Dia. Water Sizing Mandrel • (1) Quench Tank • (1) Oven Nip Roll • (1) 5x5.3x22.78 Meter 7 Floor Tower with (1) Preheating Oven with Infrared Optical Pyrometer • (1) 2-Zone Orientation Oven • Bubble Cooling Zone with Upper Cooling Ring • (4) Lower Cooling Rings • (2) 15HP Cooling Blowers • Tube Guide Rollers • 360 Degree Tube Thickness Gauge Metering Unit • 360 Degree Rotating Diagonal Bubble Feed Bars • (1) 2100mm Annealer Nip Roll Inlet with Edge Trimmers • (1) 1000-2000mm 3 Zone Annealing Tunnel Oven Unit • Preheating Zone • Annealing Zone • Chilling Zone • with Dual Outlet Drums • (1) Esse CI Model EI 027-100 2000mm Flame Surface Treatment Unit • 100 Mü/H Max Mixture Rate • 93Kw Max Thermic Power • 1500 Working Gas Pressure • 2000mm Roll • (2) 800mm Reel Width Rewinders • 1500mm Max Web Width • 800Kg Max Reel Weight • 120 m/1' Max Mechanical Speed • 30Kg Max Tension • 6" Core Diameter • Automatic Reel Change • Edge Trimmers • (1) Regrind System • (1) 21 Kw Trim Transport Blower • (1) Cyclone Dust Collector Unit;
Large Qty. of Spare Parts for Production Line to Include: Motors, Vacuum Pumps, Vacuum Hose, DC Drives, Control Boards, PLC Cards, Drive Belts, Heater Bands, Electrical Contacts, Filters, Annealer Clips, Fuses, Sensors, etc. S/N 95 F082
Removal must be completed by Friday, April 17th.
| INSTRUCTIONS TO BID |
| BIDDERS MUST AGREE TO ALL TERMS & CONDITIONS |
| ONSITE & INTERNET BIDDERS |
| All internet bidders must register for this auction at least 72-HOURS PRIOR TO SALE DATE. |
|
DEPOSIT REQUIREMENTS FOR ONLINE BIDDERS: Minimum: $2,500 required which allows a spending limit of $10,000. If you are planning on spending above $10,000 you will need to deposit 25% of your maximum anticipated spending. (This will allow a spending limit up to 4 times the deposit amount sent) Example: $5,000 deposit = allows up to $20,000 You will only be allowed to bid up to 4 times your deposit amount so please estimate your deposit accurately. We will restrict any bidding beyond the above. Forms of payment for online deposits: 1. CASHIER'S CHECK made out to Biditup Auctions Worldwide and delivered to our office prior to the sale 2301 Belgrave Ave, Huntington Park, CA 90255 2. WIRE TRANSFER Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected]. We do not accept company checks or credit cards, NO EXCEPTIONS. |
|
Those who do not post the deposit will not be approved. NO EXCEPTIONS! IF YOU ARE SHORT ON THE DEPOSIT, YOU WILL NOT BE ALLOWED TO BID |
| ALL DEPOSIT REFUNDS WILL BE RETURNED IN THE SAME METHOD OF DEPOSIT THAT WAS RECEIVED, WITHIN 5-7 BUSINESS DAYS. |
| PROXY BIDDERS |
| All proxy bidders must register for this auction at least 48-HOURS PRIOR TO SALE DATE. |
| All proxy bidders must post a 25% deposit of your planned spending budget in the form of a WIRE TRANSFER, ACH or Cashier's Check made out to BIDITUP AUCTIONS WORLDWIDE with a $2,500 MINIMUM DEPOSIT in order to be approved to bid. |
| Please Note - All wire transfers payments must include an additional $30 domestic & $45 international wire transfer fee - incoming & outgoing Please contact our office for current wire information 818.508.7034 or email wire instruction request to [email protected] |
* All Items Subject to Seller's Acceptance of Online Bids *
BUYER'S PREMIUM
ONLINE: 18%
Acceptable Payment Methods:
1. Cash
2. Cashier's Check
3. Wire Transfer
Auctioneer must approve all payment methods prior to bidding.
Please note: BidItUp is not affiliated with any machinery rigging, transport or export company. The names and contact information of available companies are provided solely as a courtesy to our buyers. BidItUp does not endorse or guarantee the services of any machinery rigging, transport or export company, and cannot be held responsible for any damage or other problems incurred as a result of the actions of those companies. We encourage buyers to employ the service provider of their choice, provided they can supply BidItUp with the required forms and insurance certificates.
